• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.939-946
• /
• 1999

A new blind multi-user channel estimation algorithm for the mobile communication systems is proposed. The proposed algorithm exploits the second-order statistics of a received signal and the subspace concept, and requires much less computational complexity than the existing algorithms. The algorithm can reduce the comptational load by estimating the physical channels excluding the spreading codes. We formulate the algorithm using the multi-channel model for asynchronous DS-CDMA systems and perform numerical experiments to evaluate the performance of the proposed algorithm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.123-123
• /
• 2021

도시하천유역이나 복합유역 등 지역적 성향을 고려한 도달시간 산정에 관한 연구는 현재까지도 미흡한 실정이다. 소규모 유역의 홍수량을 산정할 경우 유하시간보다 유입시간 비중이 상대적으로 크다. 그러나 유하시간만을 고려하여 도달시간을 산정할 때, 소규모 유역의 경우 하도가 없고 유역면적이 5km² 내외 또는 하도의 저류 효과를 기대할 수 없는 경우 도달시간이 짧아 홍수량이 과대 산정된다. 이를 극복하고자 재해영향성평가등의 협의 실무지침에서는 도달시간 이외에 매개변수인 저류상수를 인위적으로 증가시키는 방법을 제안하고 있다. 하지만 이 방법 역시 유역의 물리적인 특성을 나타내는 변수를 왜곡한다는 근복적인 문제를 완전히 해결하지 못하였다. 이에 본 연구에서는 기존 중·대규모 하천을 대상으로 수행된 연구결과를 바탕으로 제안된 홍수 도달시간 산정방법의 한계를 극복하고, 유입시간이 지배적인 소규모 복합유역에 적용 가능한 도달시간 산정방안을 제시하고자 한다. 이를 위해 실증실험을 통해 기존 유입시간 산정식을 개선하고, 도시수문 모니터링 시범유역에 적용하여 정확성을 평가하고자 하였다. 먼저, 홍수도달 시간 측정을 위한 강우유출 실내 실험장치를 제작하였다. 실험장치는 본체(길이3m×폭1.2m×높이0.8m)와 경사조절 장치(0~15도)를 포함하고 있다. 본체 전면부를 타공(ø10mm)하고 상·하단에서 지표와 기저유출을 집수하여 티핑버킷으로 유량을 측정하였고, 토체 내에는 토양수분센서를 설치하여 강우유출 발생시간 동안 토양수분 변화를 측정하였다. 본 연구에서는 하도흐름인 유하시간(Kraven 공식)을 계산하여 도달시간을 산정하기 보다 지표면 흐름인 유입시간(Kerby 공식)에 보정계수를 도입하여 도달시간을 산정하는 방안을 검토하였다. 실험 결과, 불투수 면적비율이 증가함에 따라 도달시간은 감소하고, 불투수 유역이 하류에 위치할수록 유출발생시간이 빨라졌다. 실증실험 결과를 바탕으로 도시수문 모니터링 시범유역에 적용하여 기존 유하시간과 저류상수를 보정하는 도달시간 산정방식(연속형 Kraven)과 유입시간을 보정한 도달시간 산정(수정 Kerby)으로 도출된 유출량을 실측 유량과 비교하였다. 그 결과 제안된 홍수도달시간 산정식에서 모의된 홍수량이 기존 방식과 유사하거나 우수한 첨두홍수량을 보였으며, 설계자 임의성이 배제된 일관성있는 해석값을 제시해 줄 것으로 판단된다.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.81-91
• /
• 1998

Studied on the changes of physical properties according to frequency of washing of sample such as cotton, ramie, wool, cotton knit, T/C. The results are as follows :1. The tensile strength in cotton, wool, and T/C was not changed by 5 times washing but in cotten knit was increased because hang-down phenomenon. 2.The crease resistance of cellulose fiber was decreased by repeated washing. In the case of wool, That was decreased considerably because of decreasing of elasticity and increasing of density caused by shrinking after washing. 3.The abrasion strength of wool was increased with increase in frequency of washing because of thickness caused by shrinking. 4.By repeated washing, the pills was generated in all of the samples and quantity of pills was increased with increase in frequency of washing, the pills was generated in all of the samples and quantity of pills was increased with increased in frequency of washing. Specially, in the case of cotton knit and wool, the pilling was remarkable. 5.The physical properties of dry cleaned wool was superior than that of wet cleaned wool.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.30-38
• /
• 2019

Tracking, which is one of the main causes of electrical fires, is perceived as a physical phenomenon of electrical discharge. Hence tracking should be explained based on electric field analysis, conduction path by electron generation, and gas discharge physics. However, few papers have considered these details. This paper proposes a tracking mechanism including their effects on tracking progress. In order to prove this mechanism, a tracking experiment, an electric field analysis for the carbonization evolution model, and an explanation of the tracking process by gas discharge physics were conducted. From the tracking experiment, the current waveforms were measured at each stage of the tracking progress from corona discharge to tracking breakdown. The electric field analysis was carried out in order to determine the electric field on the surface of a dry-band and the high electric field region for electron generation during the generation and progress of carbonization. In this paper, the proposed tracking mechanism consisted of six stages including electron avalanche by corona discharge, accumulation of positive ions, expansion of electron avalanche, secondary electron emission avalanche, streamer, and tracking by conductive path. The pulse current waveforms measured in the tracking experiment can be explained by the proposed tracking mechanism. The results of this study will be used as the technical data to detect tracking phenomenon, which is the cause of electric fire, and to improve the proof tracking index.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.27-34
• /
• 2016

In this paper, we propose how to recognize a multi-touch in the virtual touch type. Virtual touch has an advantage that it is installed only simple depth camera compared to the physical touch manners and it can be implemented with low cost for extracting an object exactly from only the difference of the depth values between the object and background. However, the accuracy for implementing the multi-touch has lowered. This paper presents a method to increase the accuracy of the multi-touch through the algorithms of binarization, labelling, and object tracking for multi-object recognition. Simulation results show that the proposed method can provide a variety of multi-touch events.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.385-390
• /
• 2008

The Study of environment monitoring through huge network of wireless sensor node is worked with activity. The sensor nodes must be very small, light and low cost. The localization which may determine where a given node is physically located in a network is one of the quite important problems for wireless sensor network. But simple localization method is required as excluding the usage of GPS(Global Positioning System) by the limit condition such as the node size, costs, and so on. In this paper, very simple method using connectivity for the outdoor RF communication environment is proposed. The proposed method is demonstrated through simulation.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.7-14
• /
• 2012

In this paper, performance of IEEE 802.11 carrier-sense multiple access with collision-avoidance (CSMA/CA) protocols in saturated traffic conditions is presented taking into account the impact of imperfect channel sensing. The imperfect channel sensing includes both missed-detection and false alarm and their impact on the performance of IEEE 802.11 is analyzed and expressed as a closed form. To include the imperfect channel sensing at the physical layer, we modified the state transition probabilities of well-known two state Markov process model. Simulation results closely match the theoretical expressions confirming the effectiveness of the proposed model. Based on both theoretical and simulated results, the probability of detection is concluded as a dominant factor for the performance of IEEE 802.11.

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.325-334
• /
• 2017

In this study, the numerical investigation of the non-linear behavior of the fluid flow with physical properties, such as porosity and intrinsic permeability of a porous medium, and kinematic viscosity of a fluid, are carried out. The applied numerical model is ANSYS CFX which is the three-dimensional fluid dynamics model and this model is verified through the application of existing physical and numerical results. As a result of the verification, the results of the pressure gradient-velocity relationship and the friction coefficient-Reynolds number relationship produced from this study show relatively good agreement with those from existing physical and numerical experiments. As a result of the simulation by changing the porosity and intrinsic permeability of a porous medium and the kinematic viscosity of a fluid, the kinematic viscosity has the biggest effect on the non-linear behavior of the fluid flow in the porous medium.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.67-68
• /
• 2012

전이중(full-duplex) 양방향 중계 네트워크는 전이중 방식을 사용하는 중계기에서 물리 계층 네트워크 부호화(physical layer network coding) 혹은 중첩 부호화(superposition coding)을 사용하여 기존 반이중(half duplex) 중계기를 사용하는 양방향 중계 네트워크에 비해 높은 주파수 효율을 제공한다. 본 논문에서는 전이중 양방향 중계 네트워크를 고려하여 전이중 방식에서 필연적으로 발생하는 루프간섭 신호의 영향을 살펴보았다. 여기에서 사용자 및 중계기는 루프간섭 신호를 제거하기 위해 루프간섭 신호를 추정한다. 하지만 루프간섭 신호를 추정할 때 추정 오류가 발생하여 수신 신호에서 루프간섭 신호를 완벽하게 제거하기는 어렵다. 모의실험에서는 이로 인해 발생할 수 있는 성능 변화를 불능 확률을 통해 분석하였다.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.305-312
• /
• 2007

In this paper, we present a received signal strength (RSS) prediction model to timely Initiate link layer triggers for fast handoff in a wireless LAN system. Noting that the distance between a mobile terminal and an access point is not changed abruptly in a short time interval, an adaptive RSS predictor based on a stationary time series model is proposed. RSS data obtained from ns-2 simulations are used to identity the time series model and verify the predictability of the RSS data. The results suggest that an autoregressive process of order 1 (AR(1)) can be used to represent the measured RSSs in a short time interval and predict at least 1-step ahead RSS with a high confidence level.