• 제목/요약/키워드: 물공급신뢰도

Search Result 65, Processing Time 0.028 seconds

Enhancing Competitiveness of the North Container Hinterland of Busan New Port - Based on AHP method - (부산항 신항 북컨테이너 배후단지의 경쟁력 제고 - AHP 기법을 토대로 -)

  • Park, Gil-Young;Ha, Myung-Shin
    • Journal of Korea Port Economic Association
    • /
    • v.31 no.3
    • /
    • pp.75-91
    • /
    • 2015
  • This study aims to assess the competitiveness of 30 logistics centers that operate in the hinterland of the North Container Port at Busan New Port. Thirty-two key factors were selected from previous studies to analyze and improve competitiveness and expand business opportunities in the hinterland. Suggestions from logistics experts were also canvassed. These variables were then put through first- and second-factor analysis to verify validity and measure confidence levels; they were later categorized into five factors and 15 sub-factors impacting on competitiveness. The categorized factors were compared using the analytic hierarchy process (AHP) to assess the importance of each factor and sub-factor in the case of logistics centers in the North Container hinterland of Busan New Port. The findings indicate that factors related to the securing of significant amounts of container cargoes were of greater importance. On the other hand, relatively basic factors proved to be less important in improving the competitiveness of the port hinterland.

Study on Optimal Location of Water Quality Measurement Sensor Based on Travel Time (도달시간 기반 상수관망 수질계측기 최적위치 선정에 관한 연구)

  • Eun Hwan Lee;Jeong A Wang;Song I Lee;Hwan Don Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.497-497
    • /
    • 2023
  • 정수장에서 소독 및 여과 처리가 완료된 깨끗한 물은 배급수시설로 전달되나, 실제로 관의 노후화, 갑작스러운 유향 변동, 특정 구역의 관 내 정체 시간에 따른 Water Age 상승 등 여러 요인으로 인해 실제 수용가에는 안전하지 않은 용수가 공급될 가능성이 있으며, 이에 따라 적절한 위치에서 지속적인 감시를 통한 조기 발견 및 조치가 필요하다. 상수도 시설기준(2010)에 배수시설의 주요 지점 혹은 관 말단 등 필요에 따라 적절한 위치에 수질 계측기를 설치할 수 있도록 제시되어 있으나, 계측기 설치 위치나 개수에 대한 기준이 모호한 실정이다. 모든 구역에 수질계측기를 설치하여 감시하는 것이 이상적이지만, 현실적으로는 지자체 환경 및 경제적인 한계가 있어 주요 위치에 설치하는 것이 바람직하다. 본 연구에서는 대표적인 수리해석 모형인 EPANET을 사용하여 대상 관망의 노후도, 유속, 유향변동 등의 영향인자를 바탕으로 수질사고가 발생할 확률이 높은 관을 위험관으로 선정하고, 선정된 위험관을 대상으로 최단 경로와 Cost를 산출할 수 있는 Floyd Warshall Algorithm을 이용하여 각 Node(수용가)간 물이 이동할 때의 최소 도달시간과 경로를 파악하였다. 또한, 시간 서비스 수준(Level of T hour Serivice)의 개념을 도입하여 위험관으로부터 특정시간 이내에 흐름이 도달하는 Node를 파악한 뒤, 그 중 가장 많은 피해를 발생시킬 수 있는 위험관을 수질계측위치 지점으로 선정하였다. 제시된 수질사고 발생위험이 높은 위험관을 대상으로 수질계측 위치를 선정하는 방법이 전체 관망 네트워크를 대상으로 수질계측 위치를 판단하는 방법보다 결과 신뢰도 측면에서 더욱 효과적이고 효율적인 방법으로 사료된다.

  • PDF

Development and Validation of A Decision Support System for the Real-time Monitoring and Management of Reservoir Turbidity Flows: A Case Study for Daecheong Dam (실시간 저수지 탁수 감시 및 관리를 위한 의사결정지원시스템 개발 및 검증: 대청댐 사례)

  • Chung, Se-Woong;Jung, Yong-Rak;Ko, Ick-Hwan;Kim, Nam-Il
    • Journal of Korea Water Resources Association
    • /
    • v.41 no.3
    • /
    • pp.293-303
    • /
    • 2008
  • Reservoir turbidity flows degrade the efficiency and sustainability of water supply system in many countries located in monsoon climate region. A decision support system called RTMMS aimed to assist reservoir operations was developed for the real time monitoring, modeling, and management of turbidity flows induced by flood runoffs in Daecheong reservoir. RTMMS consists of a real time data acquisition module that collects and stores field monitoring data, a data assimilation module that assists pre-processing of model input data, a two dimensional numerical model for the simulation of reservoir hydrodynamics and turbidity, and a post-processor that aids the analysis of simulation results and alternative management scenarios. RTMMS was calibrated using field data obtained during the flood season of 2004, and applied to real-time simulations of flood events occurred on July of 2006 for assessing its predictive capability. The system showed fairly satisfactory performance in reproducing the density flow regimes and fate of turbidity plumes in the reservoir with efficient computation time that is a vital requirement for a real time application. The configurations of RTMMS suggested in this study can be adopted in many reservoirs that have similar turbidity issues for better management of water supply utilities and downstream aquatic ecosystem.

Modeling reservoir water balance for generating quasi realtime operation data (준 실시간 저수지 운영자료 생산을 위한 물수지 모형)

  • Noh, Jaekyoung;Lee, Jaenam
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.125-125
    • /
    • 2022
  • 저수지 운영자료는 다목적 댐 경우와 마찬가지로, 유입량, 저수량, 방류량 자료로 구성된다. 여기에 강우량을 포함하여, 실시간으로 관리돼야 한다. 그러나 우리나라 저수지는 저수율 자료만 관리하고 있다. 유입량, 방류량이 없는 것이 아니고 관리를 하지 않는다. 강우량은 전혀 없다. 큰 문제인데, 아직도 그 심각성을 모르고, 대충하면 되는 줄 알고 있다. 가장 기초가 되는 일을 무시하고 물관리를 하고 있는 상황이고, 누구도 그 신뢰성을 믿지 않고 있다. 여기서는 이를 해결하는 방안으로 준 실시간 물수지 모형을 구축하여, 10분 단위, 30분 단위, 1시간 단위로 저수위, 저수량, 유입량, 방류량, 강우량을 연속하여 생산하고 검증하는 체제를 제시한다. 준 실시간의 뜻은 계산에 의하지 않고 유입량을 모의에 의해 적용하고 검증하는 과정이 필요하여, 실시간 보다 하루 이틀 늦게 자료를 생산한다는 의미다. 대상 저수지는 유역 내 강우량 수집이 가능한 유역면적 218.80km2, 유효저수량 3,494만m3, 수혜면적 5,117 ha인 탑정지를 선정했다. 탑정지 방류량은 탑정1(폭 7.5m×높이 1.5m), 탑정2(4m×1.6m), 양수장(3m×1.6m) 수로로 관개용수 공급량과, 9연의 수문(9m×7.5m)으로 홍수기 방류량으로 구성된다. 분석기간은 1월1일부터 1시간 단위로 연속하여 기간은 자유롭게 설정하여 검정하는 체제를 갖추고 검증된 결과를 제시토록 했다. 2021년 9월의 1시간 단위의 탑정지 저수지 물수지 모의 결과를 요약하면 다음과 같다. 첫째, 탑정지 유역의 환경부 관리 장선, 양촌, 연산 관측소의 면적우량은 최대 15.3mm, 총 160.4mm(3,510만m3)였고, ONE 모형에 의해 연속유량을 모의한 결과, 유입량은 최대 35.6m3/s, 총 1,464만m3로 유출률 41.7%였다. 둘째, 탑정1, 탑정2, 양수장 수로의 수위자료에 수위-유량 관계식을 적용해 수로유량을 산정한 결과 합하여 최대 16.8m3/s였고, 총 548만m3였으며, 수문 방류량은 최대 20.0m3/s였고, 총 108만m3였다. 셋째, 저수지 수위는 관측수위는 EL.28.21~29.38m, 평균 EL.28.87m, 모의수위는 EL.28.08~29.62m, 평균 EL.28.80m로 나타났고, R2는 0.910로 만족한 결과를 얻었다. 정리하면 저수지 운영자료가 없는데도, 10분, 1시간 단위로 연속으로 유입량, 저수량을 모의하여 관측저수량과 비교한 결과가 괄목할 신뢰도를 나타냈다. 이를 바탕으로 저수량, 유입량, 방류량, 강우량 등 준 실시간 저수지 운영자료 생산체제를 마련한 것으로 결론을 내렸다.

  • PDF

Development of a Method to Reduce Damages by Pipe Failures (상수관 파괴에 의한 피해 경감기법의 개발)

  • Jun, Hwan-Don;Kim, Seok-Hyeon;Park, Moo-Jong;Kim, Joong-Hoon;Lee, Hwan-Goo
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.6
    • /
    • pp.31-36
    • /
    • 2008
  • A water distribution system should be constructed reasonably to supply water for the customer with proper quality and pressure as demands at nodes fluctuate with time. Also it should be reliable to minimize undesirable effects on the customer when various accidents happen such as pipe failures. A new method is presented here to reduce damages by pipe failures. For the work, two methods, namely, the method for estimating practical extent of damage by pipe failures and for estimating water distribution reliability, are adopted to analyze a water distribution system and to explore the damage reduction by pipe failures. As the results from the analysis of the model, the damage can be reduced effectively by increasing durability of each pipe in minimum cutsets according to the order of priority. The suggested method was applied to the Cherry-Hill network to verify its applicability.

부착방지 기능성 도료의 탈착 특성 평가 및 고찰

  • Lee, Hak-Yeong;Kim, Yu-Seop;Jeong, Yong-Chan;Lee, Su-Yeol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.41-41
    • /
    • 2018
  • 안정적이고 효율적인 전력 공급을 위해 번화가 대로변 주변에 다수의 지상 변압기 및 개폐기가 설치되고 있으며, 이로 인해 불법 부착물로 인한 도시의 미관 훼손, 변압기 및 개폐기의 오염 등의 문제가 발생하고 있다. 따라서 각 산업체 및 연구 기관에서는 부착 방지용 코팅 도료 및 시트에 대해 다양한 연구개발을 진행하고 있으며, 현장에 적용되고 있는 사례도 있다. 하지만 현재 현장에 적용된 대부분의 제품들은 약 1년 정도의 시간이 지나면 고유의 기능을 상실하며, 도료 및 시트와 기판 사이의 박리가 일어나 우수한 성능을 보이지 않아, 결과적으로 도시에 더욱더 악영향을 주고 있다. 이러한 원인으로는 도료 및 시트의 성능 평가를 위한 다양한 규격들이 존재하지만, 테이프류 탈착 시 영향을 주는 인자(Factor)들이 명확하게 설정되어 있지 않고, 이에 대해 면밀하게 분석한 자료가 없으며, 정량적이고 객관적인 시험 방법이 고려되지 않고 있기 때문에 좋은 제품을 선별하기 어려운 상황이다. 따라서 여러 가지 제품들의 비교평가 및 기술 개발에 활용할 수 있는 가이드라인을 제시하기 위해 일반적으로 사용되고 있는 면테이프(Duct tape)를 이용하여 기판(Substrate)에 대해 다양한 인자를 기준으로 탈착 특성을 측정 및 평가하였다. 현재 지상 배전함 및 개폐기는 분체도장(Powder coating)으로 구성되어져 있으며, 그 모재는 탄소강(Carbon steel)으로 이루어져 있고, 소수의 경우 스테인리스(Stainless steel)를 사용하기 있기 때문에 분체도장(Powder coating), 탄소강(Carbon steel), 스테인리스(Stainless steel)를 기판으로 선정하여 탈착 특성을 평가했다. 탈착 특성에 관여하는 요인으로는 탈착 각도(Peeling angle), 탈착 속도(Peeling speed), 표면 조도(Surface roughness) 등이 있고, 상대 습도(Relative humidity)의 경우 탈착 특성에 영향을 거의 주지 않는 것을 확인했다. 탈착 시 각도가 클수록, 속도가 빠를수록, 조도가 작을수록 부착력(Peel resistance, N/cm)과 탈착 에너지(Energy, J)가 커지며, 탈착 특성에 영향을 주는 인자를 바탕으로 95% 신뢰도 구간을 적용한 탈착특성 모델링을 제시하였다. 이 모델링을 이용하여 실제 현장에서 발생할 수 있는 다양한 각도($90^{\circ}$, $180^{\circ}$)와 속도 범위(100 ~ 1500mm/min)에서의 탈착 특성을 추정하는 것으로, 좋은 성능 및 내구성을 가진 제품을 효과적으로 선별한다.

  • PDF

A Study on Mechanical Properties of SM490-TMC Back Plate(40 mm) Steel by SAW Welding (SM490-TMC 후판(40 mm) 강재의 SAW 용접을 통한 기계적 특성 연구)

  • Lee, Soung-Jun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.88-93
    • /
    • 2021
  • SAW (Submerged Arc Welding) is often used for ship construction or welding pressure vessels and involves spraying a flux in a powder form to a welding site to a certain thickness and continuously supplying electrode wires therein. This welding method enables high current welding up to 1,500 to 3,000 A. Arc efficiency is higher than 95% and the technique allows clean work as it creates less welding fume, which is composed of fine metal oxide particles, and the arc beam is not exposed. In this study, SM490C-TMC thick plates were heterogeneously welded by SAW. Mechanical properties of welds were measured, and welds were assessed macroscopically and for adhering magnetic particles. The following conclusions were drawn. Bending tests showed no spots exploded on sample surfaces or any other defect, and plastic deformation testing confirmed sufficient weld toughness. These results showed the 1F welding method has no shortcomings in terms of bending performance.

Risk analysis of red water and turbid water based on seasonal water usage (계절별 수도사용량에 따른 적수 및 탁수발생 위험도 분석)

  • Han, Jin Woo;Lee, Sang Mok;Kwon, Hyuk Jae
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.7
    • /
    • pp.451-460
    • /
    • 2023
  • In this study, the risk of red water and turbid water occurrence was analyzed by classifying it into detachment risk and deposition risk. First, risk factors for red water and turbid water were determined, and hydraulic analysis was conducted considering seasonal water consumption. The applied area was Cheongju City, and the risk analysis was conducted across 13 areas, and the areas with high deposition risk and high detachment risk were selected. The high risk of both detachment and deposition can be judged as an area with a very high probability of causing water quality problems. The areas with the highest deposition risk and detachment risk are the old towns of Nae deok1-dong and Yul1yang-dong, which are the oldest areas in Cheongju City with an age of more than 30 service years of pipe installation. By analyzing the risk of deposition and detachment, it will be possible to strengthen the maintenance function of the water supply network to provide the safe water to citizens and increase their confidence for tap water.

Drought Index Development for Agricultural Drought Monitoring in a Catchment (집수역 내 농업가뭄 감시를 위한 가뭄지수 개발)

  • Kim, Dae-Jun;Moon, Kyung-Hwan;Yun, Jin I.
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.16 no.4
    • /
    • pp.359-367
    • /
    • 2014
  • Drought index can be used to implement an early warning system for drought and to operate a drought monitoring service. In this study, an approach was examined to determine agricultural drought index (ADI) at high spatial resolution, e.g., 270 m. The value of ADI was calculated based on soil water balance between supply and demand of water. Water supply is calculated by the cumulative effective precipitation with the application of the weight to the precipitation from two months ago. Water demand is derived from the actual evapotranspiration, which was calculated applying a crop coefficient to the reference evapotranspiration. The amount of surface runoff on a given soil type was also used to calculate soil residual moisture. Presence of drought was determined based on the probability distribution in the given area. In order to assess the reliability of this index, the amount of residual moisture, which represents severity of drought, was compared with measurements of soil moisture at three experimental between July 2012 and December 2013. As a result, the ADI had greater correlation with measured soil moisture compared with the standardized precipitation index, which suggested that the ADI would be useful for drought warning services.

Development of Long-term Rainfall-Runoff Analysis System in SeongDeok Dam Watershed (성덕댐 유역의 장기유출 분석체계 구축)

  • Choi, Hyun Gu;Kim, Bong Jae;Kim, Seon Uk;Park, Byeong Woo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.429-429
    • /
    • 2018
  • 성덕댐은 기존 농업용 저수지였던 수락저수지를 다목적댐으로 재개발한 우리나라 최초의 사례로 2006년 11월에 착공하였다. 댐재개발 사업은 장랠 물 부족이 예상되나, 현재 마땅한 댐 개발적지가 부족하여 수자원 확보를 위해 기존의 댐을 재개발하는 것으로, 기 개발된 수자원의 활용도 제고 및 환경적으로 건전하고 지속 가능한 수자원을 개발하는 사업을 말한다. 기존의 수락저수지의 재원은 높이 19.0m, 길이 150.0m, 총 저수량 $806,000m^3$이었으며, 성덕다목적댐으로 재개발 되면서 증가된 주요재원은 높이 58.5m, 길이 274.0m, 총 저수량 $27,900,000m^3$이다. 성덕다목적댐 건설이 완료됨에 따라 기존의 농업용수($8,400m^3$/일) 공급뿐만 아니라 하천유지용수 $5,800m^3$/일 및 경북 청송, 영천, 경산지역에 생활용수와 공업용수를 $42,300m^3$/일를 공급할 수 있게 되었으며, 홍수조절용량 $4,200,000m^3$을 확보하여 유역의 홍수예방에도 기여할 수 있다. 댐의 운영기준을 수립하기 위해서는 적어도 20년 이상의 댐 유입량 자료가 필요하지만 성덕댐의 경우 댐 유입량 자료의 확보가 쉽지 않은 상황이다. 이에 K-water에서 개발하고 다양한 다목적 댐 유역에 적용한 경험이 있는 격자기반 강우-유출 모형인 K-DRUM(K-water Distributed Rainfall rUnoff Model)을 이용하여 성덕댐 유역의 장기유출모형을 구축하였다. 격자기반 수문모형의 장점은 공간적인 비균질성을 고려하여 물리적인 유출과정을 모형화할 수 있고, 이로 인해 신뢰성 있는 수문해석이 가능하기 때문이다. 성덕댐 유역의 K-DRUM 모형을 구축하기 위해서 토지이용도, 토양도(종류, 유효토심), 하천차수도, 유역도, 표고분포도 등을 수집하였으며, 격자는 60m의 정사각형 격자로 약 11,500개를 구성하여 적용하였다. 기상자료로는 안동, 의성, 영천 기상대의 강우자료와 안동 기상대의 기상자료를 활용하였다. 모형의 보정을 위해서는 2016년을 시단위로 모의하였으며 성덕댐 유입량와 비교하여 매개변수를 보정하였고, $R^2$는 0.72, NSE는 0.70, RMSE는 1.82로 신뢰도 높은 보정결과를 획득할 수 있었다. 보정된 매개변수를 성덕댐 유역의 장기유출에 적용하였으며, 1997년부터 2017년까지 총 21년 장기유출 모의를 수행하였으며, 모의결과는 댐 운영기준의 기초자료로 활용하였다.

  • PDF