• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.265-274
• /
• 2012

This study was carried out to investigate the growth characteristics, yield and chemical compositions of corn hybrids for silage according to ridging times in the paddy field cultivation. The experimental design was arranged in a randomized block design with five treatments and three replication. The ridging times of five treatments were untreated (C), 7 leaves (T1: 31 days), 8 leaves (T2: 37 days), 9 leaves (T3: 42 days) and 10 leaves stage (T4: 48 days after sowing) of silage corn. The ridging treatments (T1, T2, T3, T4) were higher (p<0.01) dry matter yield and TDN yield than the unridging treatment (C). However, there were no significant differences among T1, T2, T3 and T4 treatments. The Crude protein content of unridging treatment was decreased (p<0.01), while NDF content was increased (p<0.01) compared to ridging treatments. The contents of mineral and amino acid in ridging treatments were higher than unridging treatment (p<0.05, p<0.01). In particular, mineral and amino acid contents were the highest in T4 and T1, respectively (p<0.01). Based on the above results, ridging work is to be increased the yield quantity and nutritional value of silage corn. And the best result was obtained in T4 treatment of ridging treatments.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.72-72
• /
• 2017

국내 농업에서 토양의 반전, 쇄토, 배토, 가능한 복합작업기인 무동력 디스크해로우 방식의 경운과 배토 고효율 복합작업기의 수요가 증가 하고 있다. 경운작업에서 일련의 과정은 작물의 생육과 관리차원에서 큰 의미를 지니며 작물재배의 첫 단계로 중요시 다루어져야할 과정이다. 이러한 작업기의 성능 시험에서 포장시험을 통해 복합기의 신뢰도와 실제 필드에서 발생하는 문제들을 포괄적으로 해결 할 수 있는 방안이 필요하다. 토양 경작을 위한 농업기기의 작업 저항은 식물 생산에서 유용성을 평가하는 가장 중요한 지표중 하나이다. 작업 저항(수평, 수직 방향의 힘)은 트랙터의 힘에 의해 생성된 동작을 방해하므로 토양 경운 시 에너지 소비를 결정하고 설계 매개 변수 측면에서 최적의 작업 조건을 결정하는 데 중요한 영향을 미친다. 따라서 본 연구에서는 경상대학교 내 위치한 실험동에서 Soil-bin에 이송장치를 설치한 후, 이송장치에 디스크 해로우 (Multidisc Vario, Tulip Agri., Netherlands)를 부착하여 실험을 진행하였다. 디스크 해로우의 원주 평면과 수직 평면 사이의 각 a(토양 표면에 수직)와 디스크의 해로우의 원주 평면과 작업 방향 사이의 각 b의 값을 독립 변수로 두고 a, b를 변화 시키면서 발생하는 이송장치의 견인력을 측정하여 농가 및 효율적인 경운작업 시 기초자료로 활용하고자 한다.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.16-16
• /
• 2017

국내 농업인구 감소 대비 식품소비량이 증가함에 따라 농가의 인력을 대체하고 다양한 작업이 가능하며 가격이 저렴한 국내 기계화 기술이 필요하다. 무동력 디스크해로우 작업기는 경운과 배토가 가능한 복합작업기로서 작업기를 구성하는 주요 구성품들은 필드작업에 의해 발생되는 하중에 구조적 강도와 신뢰성이 충분히 확보되어야 한다. 또한, 실제로 필드 작업 시 작업기에 걸리는 하중은 복합하중 형태로 전달되기 때문에 단순한 형태 하중에 비해 하중계측에 어려운 점이 있으므로 하중계측점의 선정이 매우 중요하다. 본 논문에서는 하중계측점을 선정하기 위하여 복합기의 주요 구성품인 치즐(chisel) 및 디스크해로우암(disk harrow arm)에 대하여 구조해석을 수행하였으며, 3축 방향의 단위하중 응력 계산결과로부터 load reconstruction을 위한 스트레인 게이지 위치를 선정하였다. 또한, 스트레인 게이지의 신호가 하중해석에 적절한 값이 되도록 기존의 형상을 수정하였다.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2013

This experiment was carried out to select white asparagus varieties suitable for shading culture in greenhouse. Eight white and one green varieties were tested. Seeds were sown in 72-cell trays in a glasshouse on 24 Dec. 2008 and the seedlings were transplanted in a P.E house on 22 May 2009. Planting distances were 30 cm apart in a raw and 125 cm between the raws. For white asparagus production, small tunnel ($210cm{\times}160cm$) was established inside the P.E house, and covered with black and white P.E film (0.1 mm) on 5 March 2010. Days to sprouting took 5 days in 'Ravel' variety and took 16 to 18 days in 'Backlim', 'Horlim', 'Herkolim' varieties. The number of spear was highest in 'Ravel' with 6 and lowest in 'Backlim' with 3.7. The spear weight was heaviest in 'Herkolim' with 25.6 g and lightest in 'Ravel' with 15.6 g. The highest total yield was in 'Herkolim' with 296 kg/10a, followed by 'Super welcome' with 275 kg/10a and lowest in 'Rapsody' with 176 kg/10a. Marketable yields in 'Super welcome' and 'Herkolim' were 241 kg/10a and 239 kg/10a, respectively, and the yield was lowest in 'Rapsody' with 139 kg/10a. The L grade (over 20 g of spear weight) was highest in 'Herkolim'. Accordingly, 'Herkolim' was the most suitable white asparagus variety among the tested varieties for shading cultivation in greenhouse.