• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.109-111
• /
• 2024

군사 목적으로 개발된 드론은 최근 다양한 산업 및 민간 분야로 확대되고 있으며, 이러한 확대에 따라, 드론이 급격하게 발전하여, 농업이나 무인 드론 택배와 같은 산업 전반적으로 긍정적인 효과를 창출하는 추세이다. 그러나 이러한 발전에 반하여, 드론에 장착된 카메라를 통한 사생활 침해나 테러 목적으로 활용하는 것과 같은 부정적인 측면이 드러나기 시작하였다. 특히, 드론의 위치와 밀접한 연관이 있는 GPS와 관련하여, 무인 이동체의 특성상, GPS 신호에 의존하여 사용자에게 드론의 위치를 전달하지만, 이러한 GPS 신호를 송신하는 위성은 거리가 매우 멀리 위치하고, 이에 따라, 신호 세기가 비교적 약한 문제점을 가진다. 이와 같은 문제점을 악용하는 GPS 스푸핑 공격이 등장하였으며, 이 공격은 만약 공격자가 GPS 신호를 조작하여 송신한다면, 드론에 장착된 GPS 수신기는 조작된 GPS 위치를 수신하며, 이에 따라, 드론의 제어권을 탈취하거나 충돌 유발, 비정상적인 비행 경로 유도와 같은 문제점이 발생한다. 본 논문에서는 최신의 상용화된 드론을 대상으로, GPS 스푸핑 공격의 취약점을 분석하고 실증한다. 이를 위하여, 공격자가 비행 금지 구역에 해당하는 GPS 신호를 조작하는 것으로 공격을 시도하고, 이에 따른 드론에서 준비된 동작인 강제 착륙과 같은 비정상적인 행위를 유발하여, 드론의 임무 수행 능력을 제한하는 취약점을 분석하고 실험을 통하여 실증한다. 본 논문의 결과를 토대로, 최신 드론에서 발생 가능한 보안 위협을 도출함으로써, 드론의 안전성을 향상시키기 위한 자료로 활용될 수 있을 것으로 사료된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.708-713
• /
• 2013

KARI is developing a solar-electric powered HALE UAV(EAV-3). For demonstrating the technology, EAV-2H, a down-scaled version of EAV-3, is developed and after EAV-2H's initial flight test, the directional stability and control need to be improved. Thus, the vertical tail and rudder of EAV-2H are redesigned with Advanced Aircraft Analysis(AAA). Size of the rudder is increased from mean chord ratio of rudder to vertical tail, $C_r/C_v(%)=30$ to $C_r/C_v(%)=60$ and size of the vertical tail is reduced 15%. As a result, the directional control to side wind($v_1$) is improved to sideslip angle, ${\beta}(deg)=25^{\circ}$ and $v_1(m/sec)=3.54$. Also, variation of airplane side force coefficient with sideslip angle ($C_{y_{\beta}}$) and variation of airplane side force coefficient with dimensionless rate of change of yaw rate ($C_{y_r}$) are reduced 15% and 22%, respectively to minimize the effect of side wind. The empennage design of EAV-2H is verified with flight tests and applied to design of KARI's solar-electric-powered EAV-3.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.51-56
• /
• 2015

This paper presents the procedure of drag prediction for EAV-1, based on a numerical analysis correlated to an in-flight test. EAV-1, developed by Korea Aerospace Research Institute, is a small-sized UAV to test a hydrogen-fuel cell power system. The long-endurance test flight of 4.5 hours provides numerous in-flight data. The thrust and drag of EAV-1 during the flight test are estimated based on the wind-tunnel test results for EAV-1's propeller performance. In addition, the CFD analysis using a commercial Navier-Stokes code is carried out for the full-scale EAV-1. The computational result suggests that the initial CFD analysis substantially under-predicts the in-flight drag in that the discrepancy is up to 27.6%. Therefore, additional investigation for more accurate drag prediction is performed; the effect of propeller slipstream is included in the CFD analysis through "fan disk" modelling. Also, the additional drag from airplane trim and load factor that actually exists during the flight test in a circular path is considered. These supplemental analyses for drag prediction turn out to be effective since the drag discrepancy reduces to 2.3%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.436-447
• /
• 2014

The major elements of avionics system architecture are requirements, Real Time Operating System, message communication, memory, and data format etc. Herein describes a state-of-the-art development trend for the avionics system architecture, system requirements and data bus among the major elements of avionics system. While, domestic technology has been tried to Integrated Modular Avionics(IMA) system based on the Avionics Full Duplex Switched Ethernet(AFDX) technology during Light Attack Helicopter(LAH) project in Korea, but not yet proved as the product case in Full Scale Development Phase. The avionics system architecture considering the domestic inexperience of the IMA system architecture are suggested for the Next-generation Corps Unmanned Aircraft System.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.16-27
• /
• 2020

This paper investigates the applicability of optical flow information for unmanned aerial vehicle (UAV) navigation under environments where global navigation satellite system (GNSS) is unavailable. Since the optical flow information is one of important measurements to estimate horizontal velocity and position, accuracy of the optical flow information must be guaranteed. So a navigation algorithm, which can estimate and cancel biases that the optical flow information may have, is suggested to improve the estimation performance. In order to apply and verify the proposed algorithm, an integrated simulation environment is built by designing a guidance, navigation, and control (GNC) system. Numerical simulations are implemented to analyze the navigation performance using this environment.

• Journal of the Korean Society of Visualization
• /
• v.16 no.1
• /
• pp.30-36
• /
• 2018

In the present study, we investigate the flow characteristics of a quadrotor UAV in a hovering mode by measuring multiple two-dimensional velocity fields in the wake. The experiment is conducted at Re = 24,000 in a chamber large enough to neglect the ground effect, where Re is the Reynolds number based on the rotor chord length and the rotor tip speed. The rotational speed of the rotor is determined by an optical tachometer so that the lift force can be balanced with the weight of the UAV. The velocity field measured on the center plane of the rotor shows that the vortices are shedding from the tip of the rotor, inducing large fluctuations in the streamwise velocity along the wake shear layer. The strength of the rotor-tip vortex shedding is asymmetric with respect to the rotor axis due to the interaction between the rotor and the wake centerline of each rotor is inclined to the center of the UAV due to the pressure difference caused by the induced velocity. The wake from each rotor moves closer to each other while traveling in the streamwise direction, and then is merged together inducing large fluctuations in the transverse velocity. Due to the wake merging, on the center plane of the UAV, the velocity increases in the streamwise direction showing two-peak structure in the streamwise velocity contours.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.3-11
• /
• 2019

The recent earthquake of Pohang (M5.4) and the Gyeongju earthquake (M5.8) suggested the possibility of a strong earthquake in Korea and reminded us that the Korea is no longer an earthquake-safe zone. In the disaster recovery stage in a disaster like an earthquake, the investigation of the damage situation and the safety assessment of the building serve to provide important information for the initial action such as establishment of the recovery strategy and rescue of the survivor. However, the research that depends on manpower can not cope with the difficulty of processing a large number of doses in a short time, and the expertise of the manpower must be taken into consideration, which may result in delayed initial action. In this study, we propose an rapid safety evaluation technique of building using unmanned aerial vehicle which evaluates the performance and safety of buildings by integrating conventional safety inspection method with unmanned aerial vehicle technology and developed evaluation method of each evaluation factor. In order to verify this, the buildings damaged by the earthquake in Pohang were checked and compared using this system. The results are consistent with the results of the existing emergency earthquake risk assessment. As a result, the possibility of checking the emergency safety using the unmanned aerial vehicle for the damaged structures in case of a large-scale disaster such as an earthquake was confirmed.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.947-958
• /
• 2021

This study was conducted to provide basic data for crop monitoring by comparing and analyzing changes in reflectance and vegetation index by sensor of multi-spectral sensors mounted on unmanned aerial vehicles. For four types of unmanned aerial vehicle-mounted multispectral sensors, such as RedEdge-MX, S110 NIR, Sequioa, and P4M, on September 14 and September 15, 2020, aerial images were taken, once in the morning and in the afternoon, a total of 4 times, and reflectance and vegetation index were calculated and compared. In the case of reflectance, the time-series coefficient of variation of all sensors showed an average value of about 10% or more, indicating that there is a limit to its use. The coefficient of variation of the vegetation index by sensor for the crop test group showed an average value of 1.2 to 3.6% in the crop experimental sites with high vitality due to thick vegetation, showing variability within 5%. However, this was a higher value than the coefficient of variation on a clear day, and it is estimated that the weather conditions such as clouds were different in the morning and afternoon during the experiment period. It is thought that it is necessary to establish and implement a UAV flight plan. As a result of comparing the NDVI between the multi-spectral sensors of the unmanned aerial vehicle, in this experiment, it is thought that the RedEdeg-MX sensor can be used together without special correction of the NDVI value even if several sensors of the same type are used in a stable light environment. RedEdge-MX, P4M, and Sequioa sensors showed a linear relationship with each other, but supplementary experiments are needed to evaluate joint utilization through off-set correction between vegetation indices.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.552-561
• /
• 2016

In this experimental study, the dynamic stability derivatives of a tailless lambda-shape UAV are estimated from time history data of aerodynamic moments measured from the internal balance while the test model is forced to oscillate at given frequencies and amplitudes. A 3-axis forced oscillation apparatus is designed to induce decoupled roll, yaw, pitch oscillations respectively. The results show that the roll damping derivatives remain stable at the entire range of angle of attack tested, whereas the pitch damping derivatives become unstable beyond $15^{\circ}$ angle of attack. The amplitude and frequency have little impact on roll damping derivatives while the smaller amplitude and frequency of oscillation improves the pitch stability. The yaw damping derivative values are fairly small as expected for a tailless configuration. The results indicate that the proposed methodology and test apparatus area valid for estimating the dynamic stability derivatives of a tailless UAV.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1525-1535
• /
• 2008

High Altitude Platform (HAP) based networks deploy network infrastructures of Mobile Base Station (MBS) in a form of Unmanned Aerial Vehicle (UAV) at stratosphere in order to build network configuration. The ultimate goal of HAP based network is a wireless network service for wide area by deploying multiple MBS for such area. In this paper we assume multiple UAVs over designated area and solve the MBS placement and coverage problem by clustering the mobile ground nodes. For this study we assumed area around Cheju island and nearby naval area where multiple mobile and fixed nodes are deployed and requires HAP based networking service. By simulation, visual results of stratospheric MBS placement have been presented. These results include clustering, MBS placement and coverage as well as dynamic reclustering according to the movement of mobile ground nodes.