• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.988-995
• /
• 2008

A consensus-based feedback linearization method is proposed to maintain a specified time-varying geometric configuration for formation flying of multiple autonomous vehicles. In this approach, there exists no explicit leader in the team, and the proposed control strategy requires only the local neighbor-to-neighbor information between vehicles. The information flow topology between the vehicles is defined by Graph Laplacian matrix, and the formation flying can be achieved by the proposed feedback linearization with consensus algorithm. The stability analysis of the proposed controller is also performed via eigenvalue analysis for the closed-looop system. Numerical simulation is performed for rotary-wing type micro aerial vehicles to validate the performance of the proposed controller.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.559-565
• /
• 2017

A UAV(unmanned aerial vehicle) requires higher reliability for external effects such as electromagnetic interference because a UAV is operated by pre-designed programs that are not under human control. The design of a small UAV with a complete resistance against the external effects, however, is difficult because of its weight and size limitation. In this circumstance, a conventional small UAV dropped to the ground when an external effect caused the rebooting of the flight-control computer(FCC); therefore, this paper presents a novel algorithm for the improvement of the flight safety of a small UAV. The proposed algorithm consists of three steps. The first step comprises the calibration of the navigation equipment and validation of the calibrated data. The second step is the storage of the calibration data from the UAV take-off. The third step is the restoration of the calibration data when the UAV is in flight and FCC has been rebooted. The experiment results show that the flight-control system can be safely operated upon the rebooting of the FCC.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.244-245
• /
• 2008

본 논문은 관성센서를 이용한 무인 항공체의 자세 제어에 관한 연구를 다루었다. 항공계의 종류는 크게 고정익기와 회선익기로 나뉘는데 본 연구에서는 회전익기의 형태를 가진 Quarter Vehicle을 사통하였다. Quarter Vehicle은 4개의 프로펠러에 의한 양력과 회전 반발력으로 비행을 한다. 이때의 양력은 수평면에 대해 수직으로 추력을 발생시키므로 다른 비행체보다 불안정하며 이를 안정하게 제어하기 위해 관성 센서를 적용하여 균형을 유지한다. 본 연구에서는 관성센서를 이용하여 UAV의 자세와 균형을 안정적으로 유지하여 안정적인 비행이 가능하도록 하였다. 또한 상호 의존적인 항법 시스템으로 환경변화에 영향을 받지 않으며, 정확한 위치정보를 제공하는 GPS를 사용하여 3개 이상의 위성으로부터 정보를 받아 좌표를 계산하고 위치, 속도 및 방향을 결정하여 자율 비행이 가능하도록 설계하였다. 본 논문에서는 Quarter Vehicle의 구조와 이론적 배경을 통한 설계, 그리고 관성센서와 GPS의 적용을 위한 방법을 제시 한다.

• 가정의 벗
• /
• v.33 no.6 s.382
• /
• pp.22-22
• /
• 2000

• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.19-26
• /
• 2018

The aerial launching UAV(Unmanned Aerial Vehicle) mainly uses a set of folding tandem wings to maximize flight performance and minimize the space required for mounting in a mothership. This folding tandem wing has a unique aerodynamic problem that is different from the general type of fixed wing aircraft, such as the rear wing interference problem caused by the wing of the front wing wake and vortex, and the imbalance of the pivot moment applied to the front and rear wings when the wing is deployed. In this paper, we have modeled and simulated various cases through computational fluid dynamics based on the finite volume method and analyzed various aerodynamic phenomena of the tandem wing type aircraft. We find that the front wing shall be installed higher than the rear for minimizing the wake influence and the rear wing can be deployed faster than the front because of the pivot moment due to aerodynamic forces. Also, considering the pivot moment due to aerodynamic force, the rear wing can be deployed much faster than the front wing. Therefore, it is necessary to consider it when developing the wing deploy mechanism.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1042-1051
• /
• 2011

In this paper, a total operating environment equipped with onboard wireless communication systems and ground-based mission control systems is proposed for simultaneous operation of multiple UAVs. A variety of operating structures are studied and classified systematically based on types and usages of the components. For each operating system, the strength, weakness and reliability aspects are investigated. Based on these results, a proper operating system configuration is determined and components are developed for mission formation flight. Proposed system can make a formation flight of various UAVs, execute complex missions decentralizing mission to several UAVs and cooperate several missions.

• Electronics and Telecommunications Trends
• /
• v.36 no.4
• /
• pp.13-22
• /
• 2021

Among the activities of 3GPP for operating 5G-based unmanned aerial vehicles, we introduce several use cases of UAVs in 5G mobile communication such as radio access node onboard UAV, simultaneous support data transmission for UAVs and eMBB users, autonomous UAVs controlled by AI, isolated deployment of radio access through UAV, and separation of UAV service area. From this, we further summarize 5G mobile communication requirements for UAVs, including definition and operational criteria of UAS, UAS remote identification requirements, UAS usage requirements, and performance requirements. Finally, regarding 5G mobile communication-based UAS connectivity, identification and tracking support, we discuss the 3GPP UAV architecture, seven major problems, the proposed solutions to each problem, and propose the results for future specification work.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.419-429
• /
• 2020

In conducting a mission to explore and track targets using a number of unmanned aerial vehicles(UAVs), performance for that mission may vary significantly depending on the operating conditions of the UAVs such as the number of operations, the altitude, and what future flight paths each aircraft decides based on its current position. However, studies on the number of operations, operating conditions, and flight patterns of unmanned aircraft in these surveillance missions are insufficient. In this study, several types of flight simulations were conducted to detect and determine targets while multiple UAVs were involved in the avoidance of collisions according to various autonomous flight algorithms based by flocking theory, and the results were presented to suggest a more efficient/effective way to control a number of UAVs in target detection missions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.303-310
• /
• 2020

This paper describes a Power Monitoring Unit (PMU) for Unmanned Aerial Vehicle (UAV) electrical system, It is designed for the PMU which performs data sensing of generator, transformer rectifier unit (TRU), battery and gear box installed in UAV and operate power ON/OFF devices of mission equipment. The PMU measures the voltage and current for the aircraft power source (generators, transformer rectifier unit and battery), measures the pressure and temperature of the gearbox, and performs the mission equipment power command received from the mission computer. The PMU was designed to meet the requirements of the UAV, and was performed through structure/thermal analysis, environmental test, EMI test and ground/flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.74-80
• /
• 2006

This paper addresses the trajectory optimization of Unmanned Aerial Vehicles(UAVs) under multiple ground threats like enemy's anti-air radar sites. The power of radar signal reflected by the vehicle and the flight time are considered in the performance cost to be minimized. The bank angle is regarded as control input for a 1st-order lag vehicle, and input parameter optimization method based on Sequential Quadratic Programming (SQP) is used for trajectory optimization. The proposed path planning method provides more practical trajectories with enhanced survivability than those of Voronoi diagram method.