• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.179-184
• /
• 2000

This study was conducted to improve control system of insect pests, especially western flower thrips, Frankliniella occidentalis, and two-spotted spider mites, Tetreanychus urticae, of rose greenhouses. Density of thrips was relatively higher in yellow flowers than in pink or redflowers, while there was no difference in density of two-spotted spider mites by flower colors. In pest control by an automatic monorail sprayer, 89% labor and 18.2% chemical savings, as compared to the conventional high pressure spray method, were achieved without lowering the pest control effectiveness. By using an adhesive agent in combination with acaricide, adhesion of chemical to crops increased by 25% and control effect on two-spotted spider mites increased by 20.5% as compared acaricide spray alone.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.52-59
• /
• 2022

Pest control treatment was carried out using an unmanned automatic pesticide spraying system that can spray pesticides on crops while moving autonomously to control pests in vegetable greenhouse. As a result of examining the control effect on tomato and strawberry on thrips (Frankliniella occidentalis) and greenhouse whitefly (Trialeurodes vaporariorum) pests, 85.6% of yellow flower thrips were found in tomatoes and 87.5% in strawberries, and 81.7% (tomato) and 80.6% (strawberry) of greenhouse whitefly. In addition, the control effect according to the pesticide treatment method showed a control effect of 81.7% of the chemical spraying treatment by manpower and 83.9% of the automatic moving pesticide spraying treatment (F=22.1, p < 0.001). When comparing the control effect between the two treatment sections, there was no significance, but the automatic transfer spraying treatment showed a 2.2% higher effect. On the other hand, as a result of comparing the spraying time of the drug, the automatic unmanned control sprayer had a spraying time of 5 min/10a, which took about 25 min less than the conventional manpower spraying time of 25-30 min/10a. Based on these results, it was judged that the automatic transfer spraying method could be usefully used for efficient pest control in the facility greenhouse during the peak period of development.

• Korean journal of applied entomology
• /
• v.53 no.4
• /
• pp.479-483
• /
• 2014

The area of greenhouse horticulture has increased dramatically since the early 1990s in Korea. However, area per farmer still very small and diverse pest species occurs in greenhouse abundantly because of its protected condition. To manage pests, farmers use many pesticides frequently. Incessant and improper use of chemicals provoked pesticide resistance in pest and poisoning of farmers. In this study, we investigated the efficiencies of automatic dry fog sprayer for controlling two aphid species, Aphis gossypii and Myzus persicae, in greenhouse horticulture. When doors and side windows were completely closed in automatic dry fog sprayer treatment greenhouse, aphids were controlled similar level with conventional spraying method (percent control: 61.0~94.1%). However, when half of the doors and side windows of the greenhouse were opened, aphids were controlled poorly (percent control: 36.0~54.4%).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.34-39
• /
• 1999

케미게이션 시스템은 이동식 또는 정치식 관개시설에 방제와 시비 장치를 부가하여 통합 운영함으로써 작업의 생력화, 비용의 절감 및 환경 오염의 방지를 도모하기 위하여 개발된 것으로서, 주로 대단위 농지를 운영하는 미주, 호주, 중동 지역에서 활용되고 있다. 우리나라에서는 최근 과수원을 중심으로 정치식 무인방제기가 개발ㆍ보급되어 관수와 방제 작업에 이용되고 있다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.16-22
• /
• 1999

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.209-216
• /
• 1999

A self-travelling sprayer was developed to avoid the exposure of an operator to agricultural chemicals and exhaust gas, to improve safety and to increase working efficiency during the application and transport work in the greenhouses. This system consists of self-travelling system and the control system for application and safety device. The auto-spray car is equipped with a liquid chemical tank of 80l capacity. The travelling system adopted mechanical steering system which link mechanism of front wheel is guided by guide rollers. The sprayer travels along the guiding pipe which is set on the furrow in the greenhouses. The sprayer stops automatically applying and traveling when the liquid chemical tank becomes empty or when the sprayer reach the turning point. The spray booms swings in a vertical plane. The control system of safety devices controls the automatic stop of the sprayer when there is an obstacle on the traveling path, or when the battery becomes discharged. The auto-spray car traveled smoothly and steadily along the guide pipe during traveling straightly and turning on the ground.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.597-604
• /
• 2016

The aim of this study was to prevent the decrease in crop output by disease and insect pests and excessive spraying of agricultural pesticides by application uniformity. A 3m height and 15km/h speed is difficult to maintain with an unmanned helicopter for aerial application, which has been affected by the controlling habits and methods or environmental factors, such as changes in the wind. Therefore, in this study, an aerial application system was design to be attached to an unmanned helicopter, which can allow a controlled application width and spray rate automatically and verified experimentally using Rmax of MS-AVIATION. The size of agricultural land was 50 m2 and nine water sensitive cards were arranged at 1.25m intervals in 5 rows with each row having a 10m interval from the position of 5m. The unmanned helicopter was flying at speeds ranging from 7.2km/h to 17.6km/h and heights ranging from 2.32m to 3.47m. The proposed aerial application system allowed application uniformity by making a valid spraying area of 7.5 m2 with 46423 particles distributed on average.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.350-357
• /
• 2014

We studied on pesticide residue and pest control effect when using various types of sprayers on paprika cultivation. Additionally, a test was conducted to optimize chemical content per unit area in condition of optimum pest control. Two types of sprayer were tested (three times) on paprika cultivation which was divided into seven sections. Blind spots were also examined using a water sensitive paper when spraying chemical pesticide, remote controlled sprayer were confirmed to be not effective in terms of its spraying capacity. However, a U-shaped sprayer was confirmed that it sprayed enough on all the parts of a plant in green house including the blind spots. Additionally, it does not exceed the minimum residue limits on the all parts of pesticides residue conditions. When using remote controlled sprayer, water sensitive paper were changed to blue color (82.5% and 81.2%) in terms of controlling Bemisia tabaci and Aphis gossypii based on the two spraying manners. 53.0% and 42.6% of control effect were shown on the fair parts of the plants. However, on the poor parts on which pesticides were not well-sprayed, thus, not-remained, more number of pests increased. Meanwhile, on farming that only one type of pesticide has been used, resistance pests present with very low control effect, even though sufficient amount of pesticide was well-sprayed. On the test of the optimum amount of spraying per a unit area, which shows no differences in the two cases of using 5L and 2.5L of chemical pesticides on 9 plants of paprika that has 81.8% and 84.5% control effect, respectively.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.303-308
• /
• 2013

A remote controlled sprayer has designed, manufactured and experimented to spray well on pear trees with pesticides. This study was executed to automate pest management of pear trees. Types of spray nozzle, which was used on the system, were analyzed experimentally to find an optimal spray equipment configuration with several nozzles. Attributions of ultrasonic sensors were analyzed to adjust spraying distance of an unmanned sprayer system. This paper investigated shapes of pear trees and cultivating environment of pear orchard. In order to select optimal spray environment, liquid distribution was measured while angle of nozzle was changed. Additionally, liquid distribution by distance and sprayed liquid capacity by side distance were measured. According to information of shapes of pear trees and cultivating environment of pear orchard, sprayer frames of an unmanned sprayer system were manufactured and sprayer frames were suitable for interval of pear trees. The sprayer system could adjust width of sprayer frames to 2.5 m and height of sprayer frames to 1.7 m. Optimal angle of nozzle, and optimal distance between objects and nozzle were $15^{\circ}$ and 0.8 m. When side distance was placed from 1.2 m to 1.8 m, sprayed capacity reached to the highest amount.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.6
• /
• pp.269-279
• /
• 2020

This paper presents the design and implementation of embedded systems and autonomous path generation for autonomous speed sprayer. Autonomous Orchard Systems can be divided into embedded controller and path generation module. Embedded controller receives analog sensor data, on/off switch data and control linear actuator, break, clutch and steering module. In path generation part, we get 3D cloud point using Velodyne VLP16 LIDAR sensor and process the point cloud to generate maps, do localization, generate driving path. Then, it finally generates velocity and rotation angle in real time, and sends the data to embedded controller. Embedded controller controls steering wheel based on the received data. The developed autonomous speed sprayer is verified in test-bed with apple tree-shaped artworks.