• 제목/요약/키워드: 무시

검색결과 2,210건 처리시간 0.03초

상용차를 위한 무시동 에어컨 시스템용 전력변환장치 개발 (Development of the Anti-Start Air Conditioner System Power Conversion Unit for Commercial Vehicle)

  • 한근우;김성곤;이충훈;최명현;정영국;임영철;조훈희
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 전력전자학술대회 논문집
    • /
    • pp.139-140
    • /
    • 2015
  • 차량용 에어컨 시스템은 엔진의 가동(주행 또는 공회전)에 의해 발생되는 에너지를 이용하여 운전자가 원하는 차량 실내온도를 유지시켜주는 장치를 말한다. 이러한 기계식 에어컨 시스템의 작동은 엔진 구동력의 일부를 활용하고 있어 자동차의 연비와 큰 관련성 있다. 때문에 하절기 작업 대기시나 차량 내 야간취침 등이 빈번한 상용차량의 경우 운전자의 운행습관에 따라 연료 소비량이 증가하는 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 대형 상용차량이 정차중인 무시동 기간에도 일정 온도의 유지가 가능 하도록 전력변환장치가 적용된 에어컨 시스템을 제안하였다.

  • PDF

무시동 에어컨 시스템을 위한 4kW급 Cascaded 푸쉬-풀 컨버터 개발 (Development of the 4kW Cascaded Push-Pull Converter for Non-Starting Air Conditioner System)

  • 한근우;강철하;박진성;김성곤;이충훈;최명현;정영국
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 추계학술대회 논문집
    • /
    • pp.79-80
    • /
    • 2016
  • 상용차에서 사용되고 있는 기계식 에어컨 시스템은 엔진의 가동(주행 또는 공회전)에 의해 발생되는 에너지를 이용해 차량 실내온도를 유지시켜준다. 이러한 기계식 에어컨 시스템의 작동은 엔진 구동력의 일부를 사용하기 때문에 상용차의 연비와 큰 관련성 있다. 상용차는 하절기 작업대기, 차량 내 야간취침 등이 빈번해 운전자의 운행습관에 따라 연료 소비량이 증가하는 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 대형 상용차량이 정차중인 무시동 기간에도 일정 온도의 유지가 가능 하도록 4kW급 Cascaded 푸쉬-풀 컨버터와 전동식 압축기 구동용 인버터로 구성된 전력변환장치를 제안하였다.

  • PDF

상온양생에 의한 하이브리드 섬유를 혼입한 50MPa급 3성분계 무시멘트 모르타르 강도발현 (50MPa Ternary Non-Cement Mortar Strength Development Mixing with Hybrid Fibers Cured by Room Temperature)

  • 조성원;조성은;김영수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.179-180
    • /
    • 2020
  • CO2 emissions are caused by cement manufacturing process. To solve this problem construction industry are using industrial by-products to replace cement. In this study, three different industrial by products were used and mixed with hybrid fibers to enhance bond strength. As the result, Regardless of the mixing rate of silica fume, the compressive strength of the ternary non cent mortar was higher than that of OPC and binary. And mixed hybrid fibers cured by room temperature compressive strength were 23% higher than those without hybrid fibers.

  • PDF

토르마린을 혼입한 무시멘트 경화체의 강도 특성 (Strength Properties of Non-cement Matrix Mixed with Tourmaline)

  • 권형순;이창우;황우준;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.55-56
    • /
    • 2022
  • As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.

  • PDF

활성화제 혼입율에 따른 무시멘트 경화체의 미소수화열 및 강도 특성 (Microhydration Heat and Strength Characteristics of No-Cement Composites according to Activator Ratio)

  • 김채영;윤주호;박정연;이재인;최세진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.307-308
    • /
    • 2023
  • This study, as part of a study to reduce carbon dioxide emissions from the cement industry, compared and analyzed microhydration heat and strength characteristics of no-cement composites using blast furnace slag powder as a binder and CaO, CaCl2, Ca(HCOO)2 and Ca(NO3)2 as alkali activators. As a result of the evaluation, considering the strength, it is judged appropriate to use CaO, CaCl2 and Ca(NO3)2.

  • PDF

양생온도에 따른 페로니켈슬래그 미분말 적용 무시멘트 복합체의 유동성 및 강도특성 (Fluidity and strength characteristics of no-cement composite applied with ferronickel slag powder according to curing temperature)

  • 김채영;윤주호;박정연;박관홍;이재인;최세진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.193-194
    • /
    • 2023
  • Recently, research is being conducted on geopolymers using industrial by-products as a cement substitute to reduce carbon dioxide emissions from the construction industry. Since geopolymers use industrial by-products, their performance varies depending on the type of alkali activator used, curing temperature, etc. Therefore, as part of a study to reduce carbon dioxide emissions from the construction industry, this study mixed blast furnace slag powder and ferronickel slag powder as cement substitutes, and compared and analyzed the fluidity and compressive strength of no-cement composites according to curing temperature.

  • PDF

플라이애시 대체율에 따른 무시멘트 복합체의 유동성 및 압축강도 특성 (Fluidity and compressive strength characteristics of no-cement composite according to fly ash replacement rate)

  • 이재인;박정연;김채영;윤주호;최세진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.195-196
    • /
    • 2023
  • Recently, the importance of eco-friendly and sustainable development has been emphasized. The construction industry also needs to make efforts to reduce cement use, which accounts for 8% of greenhouse gas emissions. This study examined the fluidity and compressive strength of a cementless composite using fine blast furnace slag powder and fly ash without using cement in order to reduce greenhouse gas emissions due to the use of cement.

  • PDF

이 사람이 사는 법-생활자료 수집가 최웅규씨

  • 박천홍
    • 벤처다이제스트
    • /
    • 통권34호
    • /
    • pp.18-19
    • /
    • 2003
  • 생활자료 수집가 최웅규씨는 남들이 쉽게 흘려버리고 무시하고 잊어버린 것들을 모으는 데 일가를 이룬 사람이다. 그는 남들이 쓰다 버린 교과서, 잡지, 엽서, 포스터, 교복, 도시락, 태극기, 이발소그림 등을 마치 곤충채집 하듯 모아 과거의 표본을 만들어왔다.

  • PDF

조명도가 일의 능률에 미치는 영향

  • churchman A. T.
    • 전기저널
    • /
    • 5호통권25호
    • /
    • pp.11-16
    • /
    • 1972
  • 업무를 수행 할때에는 조명의 효과각 극히 중요시 되어야 함에도 불구하고 이것이 거의 무시되고 있다. 특정한 업무에 따라 적절한 조명속에서 일하는 것은 일의 능율을 올리고 피로 격감시키는 것이다. 이러한 점은 고용주나 고용인 모두에게 이익을 주는 것이다.

  • PDF

금속가공 공정에서의 열전달 문제

  • 임용택
    • 기계저널
    • /
    • 제32권8호
    • /
    • pp.706-712
    • /
    • 1992
  • 이 글에서는 일반 금속 가공 공정에서 수반되는 열전달 문제가 가지는 중요한 점들을 일부 살펴 보았다. 지금까지 많은 연구와 발전이 있었으나 실험의 한계성, 물리적인 이해의 한계 등으로 인해 앞으로도 더욱 많은 일들이 이분야에 이루어져야 하며 특히 공정 설계에 있어서 열전달 효과가 무시되어서는 안되겠다.

  • PDF