• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.90-99
• /
• 2009

In this paper, we proposed the new class-E frequency multiplier design that include the highest efficient characteristics. The proposed frequency multiplier is designed for 5.8[GHz] output using the frequency multiplier about 2.9[GHz] input signal. And studying in this paper is for the design and the implementation of the class E frequency multiplier. For the result, the maximum highest efficient characteristics 32[%] which is with output power 24.5[dBm] and 8.5[dB], is shown with frequency multiplier for the 2.9/5.8[GHz] class E. And we applied the linear method to the implemented class E frequency multiplier. As a result, the output spectrum for the linear is upgrade to 12[dB], 12[dB], 13[dB] of the ACPR characteristics on the +11[MHz], +20[MHz], +30[MHz] offset frequency in the center frequency. The result is satisfied with the 3.83[%] of the lineared EVM for the 64-QAM modulated method with the 54[Mbps] transmission velocity. In this paper, we show that the good compensation result of the linearity and the efficiency through the digital pre-linear method of the distortion with the frequency multiplier. Therefore, we suggested the frequency multiplier method are applying to WLAN, cellular, PCS, WCDMA, and etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1170-1174
• /
• 2009

Two frequency-reconfigurable antennas have been designed and combined in a space with limited volume, i.e., 40mm ${\times}$ 20mm ${\times}$ 6mm. Each antenna can be reconfigured to operate at different frequency bands depending on the state of an embedded switch, which is implemented using a PIN diode. The first antenna can be switched between 0.82GHz ${\sim}$ 0.96GHz band (GSM/ CDMA) and 1.7GHz ${\sim}$ 2.17GHz band (DCS/ PCS/ WCDMA), which are cellular bands. The second antenna can be switched between 3.4GHz ${\sim}$ 3.6GHz band (mWiMax) and 2.3GHz ${\sim}$ 2.5GHz, 5.15GHz ${\sim}$ 5.35GHz bands (WiBro/ WLAN 11a/b/g/n), which are connectivity bands. The proposed combined antenna operates both over cellular bands and connectivity bands concurrently. The choice of the operation bands is made independently by the states of the two switches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3391-3397
• /
• 2011

These excavators have been widely used due to their flexibility in handing various tasks via simple changes of their attachments. Since the performance of manually-operated excavators heavily depend on the operators' skill level, there is a strong need for developing automatic excavators in the industry. In order to achieve such goals, exiting approaches have studied direct modification of existing hydraulic systems in the excavator for feed back control of each link. This paper presents a miniaturized automatic excavator that can be used for the development and demonstration of advanced control algorithm for excavators under a safer environment with reduced cost. Two PCs were installed and connected to the excavator through wireless communications for its control and monitoring. Tracking control of each link using a time varying sliding mode controller was performed through experiments on the developed system to demonstrate its ability.

• Information Systems Review
• /
• v.10 no.2
• /
• pp.309-327
• /
• 2008

This research is a byproduct of a project initiated by a major airport in Korea. The airport aimed to enhance airside safety and weighed a few IT options that may strengthen its current safety practices. In order to satisfy requirements unique to the airport and to inherit existing legacy systems, a PCS-based mobile database system was proposed. We first discuss technical aspects of the system as well as design issues in mobile systems before we compare two specific alternatives for transactional service handoff. A simulation study comparing two types of coordination follows before we present a scheme that manages transaction processing and locating service in mobile environments. Finally, we discuss the limitations of the scheme from the perspectives of the airport in question along with other research issues.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.639-648
• /
• 2011

Since the emergence of the smartphone and tablet PC whose wireless internet accessibility has improved, personal computing environment has shifted from PCs to mobile web based mobile devices, and therefore the use of information and the communication method have been changing rapidly. Under the circumstance, domestic universities have actively been establishing mobile websites for smartphone users. Such mobile websites, however, focused on diverse functions and a showy design rather than on usability or accessibility, and were developed simply for the purpose of public relations. For this reason, students are now faced with difficulties in using the websites. Therefore, this paper proposes a novel web interface with the consideration of usability and accessibility in order for users to easily use and assess proper information. The matters to be taken into account in developing a mobile website are an intuitive interface design, user experiences, a user customized interface and compliance with web standards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8C
• /
• pp.819-827
• /
• 2002

Personal mobile communication has been developed up to IMT-2000 which is called the third generation mobile communication. The first generation of personal mobile communication was analog cellular, the second was digital cellular, and the 2.5 generation was PCS. Before the third generation had been developed, the personal mobile communication service was focused mainly on the voice-oriented service. But, we can expect that multimedia service after the third generation system will be the core of the subject. T In this thesis, we propose a dynamic resource allocation algorithm in the UTRA TDD systems which can support the asymmetric traffic propensity and multimedia traffic. The proposed algorithm consists two sub-algorithms. One is the dynamic channel allocation method that determines the amount of bandwidth assigned between uplink and downlink according to resource allocation status list through asymmetric traffic propensity. The other is the channel access mechanism that assigns RU to bearer service generated in a cell. By simulation, the proposed dynamic resource allocation algorithm is proved to support asymmetric propensity of traffic and shows a better throughput for multimedia traffic.

• Journal of Digital Convergence
• /
• v.9 no.2
• /
• pp.131-140
• /
• 2011

As the recent advances in network and wireless communications and semiconductor design and process technologies, our computing platform is rapidly shifting from desktop PCs to mobile devices such as UMPC (Ultra Mobile PC), Tablet PC, and Smartphone. Especially, wide-spreading Smartphones allow a new field of application based on location based services available with an user interface called augmented reality (AR). Therefore, this paper introduces an implementation of AR using various OpenAPls on Android Smartphones. In order to utilize enrich user data in real time, the system integrates with location based social network services also with OpenAPI. These APIs enable third-party developers to make use of rich contents of many portal web sites. The prototype was implemented on the real Android phone, Sky Sirius, and the result shows that it can provide an efficient location based service using AR technology without any constraints on mobile devices; in addition, it connects SNS to AR for sharing user data including photos, videos, and messages based on a specific location.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12B
• /
• pp.1115-1123
• /
• 2003

In this paper, a remote control system called TeleRemote system which can be applied to existing wireless mobile networks or public telephone networks for remote control is designed and implemented. The proposed design employs program technology based on the theory of signal detect control and enables the EPG(Electronic Program Guide) functions such as recording reservation of bidirectional video signals with TV reception card on PC. It can also control recording reservation using remote control program through telecommunication network The PC-EPG system is implemented in Web programs with Server/Clinet architecture and the server system that provides EPG functionalities is in charge of recording reservations and data communications by means of the scheduler program. Data storing to client PCs is performed through TCP/IP and finished by client programs implemented using Visual C++/MFC programs. As remote control system, the developed system can be used for unmanned security system using the Web camera. Building intranet and making connection to internet, the TeleRemote system is believed to create potential for commercial communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2210-2216
• /
• 2007

In this paper, triple-band plastic chip antennas for mobile terminal are investigated. Plastic chip antenna is composed of Foamex material with circle of PVC(Polyvilyl chloride). For its electric characteristics, the dielectric constant is 1.9, the insulation intensity is 112KV/cm. Plastic chip antennas are don't tend to break easily against to external shock, have more gain and efficiency than ceramic chip antennas. Triple-band plastic chip antennas of four type are implemented and experimented. From the experiments results, the antenna resonate at the triple-band, the gain of the antennas has about above -2dB, the pattern is ommidirectional the same as the conventional antennas. So, the antennas realized with Foamex material will be application for mobile phone antenna operated at the triple band which is cellular band and Korea-PCS band and ISM band or the antenna for other wireless communication system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.459-464
• /
• 2023

The mobile house of this article is provided with stand-alone power system that uses photovoltaic energy and enables sensing and environmental monitoring. Excess power generated is stored in lithium batteries, which enable smooth operation of the mobile house even in environment in which solar energy cannot be used. The house has been designed that its systems can be operated continuously by diesel power generation even when photovoltaic energy cannot be generated due to long rainy season or heavy snow. BMS (batter management system) has been constructed for photovoltaic and power management, and monitors the charge/discharge and usage amount of photovoltaic energy. Various sensing data are recorded and transmitted automatically, and the design allows for wireless monitoring by means of computer and smartphone app. The container house proposed in this study enables efficient energy management by performing optimal energy operation in remote areas, parks, event venues, and construction sites where there is no system power source.