• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.17-26
• /
• 2016

This work proposes a 12b 60MS/s 0.18um CMOS Flash-SAR ADC for various systems such as wireless communications and portable video processing systems. The proposed Flash-SAR ADC alleviates the weakness of a conventional SAR ADC that the operation speed proportionally increases with a resolution by deciding upper 4bits first with a high-speed flash ADC before deciding lower 9bits with a low-power SAR ADC. The proposed ADC removes a sampling-time mismatch by using the C-R DAC in the SAR ADC as the combined sampling network instead of a T/H circuit which restricts a high speed operation. An interpolation technique implemented in the flash ADC halves the required number of pre-amplifiers, while a switched-bias power reduction scheme minimizes the power consumption of the flash ADC during the SAR operation. The TSPC based D-flip flop in the SAR logic for high-speed operation reduces the propagation delay by 55% and the required number of transistors by half compared to the conventional static D-flip flop. The prototype ADC in a 0.18um CMOS demonstrates a measured DNL and INL within 1.33LSB and 1.90LSB, with a maximum SNDR and SFDR of 58.27dB and 69.29dB at 60MS/s, respectively. The ADC occupies an active die area of $0.54mm^2$ and consumes 5.4mW at a 1.8V supply.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.1_2
• /
• pp.80-89
• /
• 2001

The development in the mobile computing systems have arisen new and previously unforeseen problems, such as problems in information management of mobile host, disconnection of mobile host and low bandwidths of wireless communications. Especially, location information management strategy of mobile host results in an increased overhead in mobile computing systems. Due to the mobility of the mobiles host, the changes in the mobile host's address depends on the mobile host's location, and is maintained by mapping physical address on virtual address, Since previously suggested several strategies for mapping method between physical address and virtual address did not tackle the increase of mobile host and distribution of location information, it was not able to support the scalability in mobile computing systems. Thus, to distribute the location inrormation, we propose an advanced n-depth LiST (Location information Search Tree) and the parallel location search and update strategy based on the advanced n-depth LiST. The advanced n-depth LiST is logically a hierarchical structure that clusters the location information server by ring structure and reduces the location information search and update cost by parallel seatch and updated method. The experiment shows that even though the distance of two MHs that communicate with each other is large, due to the strnctural distribution of location information, advanced n-depth LiST results in good performance. Moreover, despite the reduction in the location information search cost, there was no increase in the location information update cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2017

As Internet of Things (IoT) technology advances, there is a growing demand for location-based services (LBSs) to identify users' mobility and identity. The initial LBS system was mainly used to measure position information by measuring the phase of a signal transmitted from a global positioning system (GPS) satellite or by measuring distance to a satellite by tracking the code of a carrier signal. However, the use of GPS satellites is ineffective, because it is difficult to receive satellite signals indoors. Therefore, research on wireless communications systems like ultra-wide band (UWB), radio frequency identification (RFID), and ZigBee are being actively pursued for location recognition technology that can be utilized in an indoor environment. In this paper, we propose an LBS system that includes the 2.45GHz band for chirp spread spectrum (CSS), and the 3.1-10.6GHz band and the 250-750MHz bands for UWB using the IEEE 802.15.4a standard for low power-based location recognition. As a result, we confirmed that the 2.45GHz Industrial, Scientific and Medical (ISM) band RF transceiver and the ranging function can be realized in the hardware and has 0dBm output power.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.38-48
• /
• 2007

In ubiquitous environment, sensor networks that sense and transmit surrounding data without human intervention will become more important. If sensors are installed for detecting vehicles and measuring their speed in the road and that real-time information is given to drivers, it will be very effective for enhancing safety and controlling traffic in the road. In this paper, we proposed a new reliable and real-time sensor MAC protocol between AP and sensor nodes in order to provide real-time traffic flow information based on ubiquitous sensor networks. The proposed MAC allocates one TDMA slot for each sensor node on the IEEE 802.15.4 based channel structure, introduces relayed communication for distant sensors, and adopts a frame structure that supports retransmission for the case of errors. In addition, the proposed MAC synchronizes with AP by using beacon and adopts a hybrid tracking mode that supports economic power consumption according to various traffic situations, We implemented a simulator for the proposed MAC by using sim++ and evaluated various performances. The simulation results show that the proposed MAC reduces the power consumption and reveals excellent performance in real-time application systems.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2002.03a
• /
• pp.83-88
• /
• 2002

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 증대될 것으로 예상되는 분야가 위치기반 서비스(LBS: Location Based Service) 기술이다. 위치기반 서비스는 이동 통신을 통하여 사람 및 사물의 위치를 파악하고 이를 활용한 부가 응용 서비스로 국가 정보기술 인프라의 주요 영역을 점유하고 있는 GIS의 차세대 핵심 기술로 발전이 예상되는 분야이다[3][4]. 현재 3GPP나 3GPP2, OGC, LIF와 같은 여러 표준화 기구 및 산업체에서 위치기반 서비스와 이를 위한 시스템에 대한 연구가 진행중이며 위치기반 서비스를 위한 데이터 모델 표준화 연구는 거의 이루어지지 않고 있는 상황이다. 위치기반 서비스를 위한 데이터 표준화 모델은 이미 구축된 공간 데이터베이스의 재사용과 위치기반 서비스들간의 상호 운용성을 지원할 수 있어야 한다. 본 연구에서는 위치기반 서비스들 간의 상호 호환 및 통합을 가능하게 하고, 기존 공간데이터베이스와 연계하여 이 데이터를 위치기반 서비스에 활용하기 위한 공간 데이터 표준화 모델을 제안하고자 한다. 이를 위해 위치기반 서비스 표준화 사례를 조사하고, 위치기반 서비스를 위한 공간 데이터 모델을 제시하였다. 본 연구에서는 OpenLS의 위치기반 서비스를 기본서비스로 하고, OpenGIS의 공간 데이터 모델을 기반으로 네 가지 기본 위치 데이터 타입과 모델의 요구 사항을 포함하는 공간 데이터 표준모델을 개발하였다. 위치기반 공간 데이터 표준 모델은 위치기반 서비스와 데이터들과의 연계를 쉽게 하고, 위치기반 서비스들 간의 상호 운용성을 높이며, 기존 사용자 시스템의 수정 없이 인터페이스만을 추가함으로써 표준을 수용할 수 있다.\pm}153.2,\;116.1{\pm}94,\;29.4{\pm}30.3,\;45.1{\pm}44$로 Mel 10군과 Mel 30군이 유의적인 감소를 보였으나(p<0.05) 이들 두 군 간의 차이는 나타나지 않았다. 이상의 결과로, 랫트에서 복강수술 후 melatonin 10mg/kg투여가 복강 내 유착 방지에 효과적이라고 생각된다.-1}{\cdot}yr^{-1}$로서 두 생태계에 축적되었다.여한 3,5,7군에서 PUFA 함량이 증가한 반면, SFA 함량은 감소하여 P/S 비율, n-3P/n-6P 비율은 증가하는 경향이었으며 이는 간장의 인지질, 콜레스테롤 에스테르, 총 지질의 지방산조성에서도 같은 경향을 볼 수 있었다.X>$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.78-86
• /
• 2004

Recently GPS and mobile GIS technologies based on LBS(location based service) have played an important role as DSS(decision supporting system) for domestic forest fire extinguishment policies. In this study forest fire extinguishments information management system based on mobile GIS technique was designed to seize the exact location on wireless network so that it helps to guide the safe and efficient extinguishments affairs and provide the extinguishments environment toward ground fighting teams and the central forest government in real time. Moreover, possibly to operate this system, the foundation technologies by the name of '.gci' such as the spatial data compression method, the spatial data transmission method over wireless network and the spatial analysis interface on PDA should be mainly considered. Especially, in this study the spatial data compression method having high compression rate from 51% to 62% for each polygon, line, and point data, without the loss of data was developed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1008-1016
• /
• 2013

SAR measurement which was applied only to the mobile phone has been expanded in the Korean radio regulation law to the portable wireless communication equipments within 20 cm from the human body since Jan. 2012. The two-way radio operating at 150 MHz frequency band was newly included following the revised radio regulation in the target equipment of measurement. SAR measurement system at 150 MHz satisfying this regulation is necessary accordingly for SAR conformity assessment. The international SAR measurement standard(IEC 62209-2) includes the evaluation method on frequencies above 300 MHz, and the commercial SAR measurement system can measure SAR above 300 MHz only. The size of the reference dipole antenna(760 mm, return loss: -27.57 dB) and flat phantom ($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), targeted SAR values for numerical analysis(1 g: 1.08 W/kg, 10 g: 0.77 W/kg) for SAR validation evaluation at 150 MHz frequency are proposed in this paper. The suggested dipole antenna and flat phantom are assembled and used to verify the conformity assessment of commercial SAR measurement system. The measured SAR values of 1 g and 10 g were obtained respectively to be 1.13 W/kg, 0.81 W/kg, and they satisfied the effective range(within ${\pm}10$ %) of IEC international standard. The standards based on this study are expected to be used for the domestic SAR measurement standard and IEC(International Electrotechnical Commission) international standard.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.10
• /
• pp.427-436
• /
• 2013

In this paper, a method of moving path control of an automatic guided vehicle in an indoor environment through recognition of marker images using vision sensors is presented. The existing AGV moving control system using infrared-ray sensors and landmarks have faced at two critical problems. Since there are many windows in a crematorium, they are going to let in too much sunlight in the main hall which is the moving area of AGVs. Sunlight affects the correct recognition of landmarks due to refraction and/or reflection of sunlight. The second one is that a crematorium has a narrow indoor environment compared to typical industrial fields. Particularly when an AVG changes its direction to enter the designated furnace the information provided by guided sensors cannot be utilized to estimate its location because the rotating space is too narrow to get them. To resolve the occurrences of such circumstances that cannot access sensing data in a WSN environment, a relative distance from marker to an AGV will be used as fingerprinting used for location estimation. Compared to the existing fingerprinting method which uses RSS, our proposed method may result in a higher reliable estimation of location. Our experimental results show that the proposed method proves the correctness and applicability. In addition, our proposed approach will be applied to the AGV system in the crematorium so that it can transport a dead body safely from the loading place to its rightful destination.

• Science of Emotion and Sensibility
• /
• v.12 no.2
• /
• pp.161-168
• /
• 2009

In this study, we have developed the patch type HAMS (Heart Activity Monitoring System) which is non-restricted, non-awarable and non-invasive. The module using wireless telecommunication to receive the ECG (electrocardiogram) signal at the computer has mobility which it easily monitors the heart activity of subjects in no time for long term at any time and places. We developed the small patch type electrode which can be attached on the chest. Also the reliability and moving artifact of ECG signal measured by this electrode have been verified. Using HAMS, we measured the HRV (Heart Rate Variability) parameters, the questionnaire evaluation for anxiety and stress and the amount of stress hormone (cotisol) to evaluate the stress effect in HRV on the same subject. As a result of comparing the values under non stressed and stressed condition, there was significant difference on many parameters. And the parameter highly related with stress on Pearson's Correlation Coefficient has been examined. These show that using HAMS is able to evaluate the function of autonomic nervous system. Therefore, we can predict heart problem in daily life by using HAMS. Also we expect that this module can be applied for more application as health monitoring system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.304-304
• /
• 2006

One method of Electric Power Generation is to use piezoelectric materials, which form transducers that are able to interchange electrical energy and mechanical force or strain. This study describes the fabrication and properties of piezoelectric transducers for Power Generation application. The structure of the transducers was ceramic-metal-ceramic 3-layered parallel type The center metal layer of phosphorous bronze was bonded by two piezoelectric layers of which have sputtered Ag/Cu(or Ni/Cu) electrode layers on both sides.. The Energy generated by the vibration of piezoelectric transducers Can be achieved by adjusting a suitable piezoelectric constant and mechanical structures. The piezoelectric material used in this application showed the electrical properties of r=4400, $d_{33}\;=\;750\;(10^{-12}\;m/V)$, $d_{31}\;=\;-300\;(10^{-12}\;m/V)$, $k_{33}\;=\;71%$, $Qm\;=\;85$, $T_c\;=\;210^{\circ}C$.