• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.76-79
• /
• 2017

This paper presents the electromagnetic shielding structure for low frequency wireless power transfer system with magnetic induction method using soft magnetic materials. Soft magnetic materials have advantages such as high permeability and low magnetic loss, but have undesirable effect of power loss by eddy current. To overcome this, we proposed the patterned soft magnetic material to suppress the eddy current path. For validity of this paper, we simulated the coil transfer efficiency and the radiated electromagnetic field, and fabricated the proposed structure using 79-permalloy. The measured results shows good agreements with the simulated results and reduction of the radiated electromagnetic field compared to commercial ferrite plate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1135-1140
• /
• 2016

The main challenge in designing wearable WBANs is to guarantee the balance of QoS demands in the network with the low power constraints of limited battery powered nodes. Low power devices implanted in or attached to the body should be designed to meet minimum energy requirements due to their limited battery life and be small in size to be easily wearable. In this paper, we propose a method for optimizing channel allocation method that is compatible with the IEEE 802.15.6 standard, enables the maximum amount of power charge at idle, guarantees the QoS of a WBAN, and provides the reliable date transmission between nodes and hubs in the network. Our extensive simulations will show that the method we propose not only maximizes the QoS in packet transmission but also improves the level of energy efficiency.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.301-308
• /
• 2015

To reduce the weight of a railroad vehicle, a bogie frame skin is considered for manufacture using an RTM process and composite material. Compared to other processes, RTM has merits in that it demands only simple manufacturing facilities and can produce a large and complex structure in a short cycle time. On the other hand, it is important to determine the proper number and locations of gates and vents to prevent void formation inside a structure. In this study, we numerically predicted the flow pattern in a bogie frame skin during the RTM process by distinguishing the permeability of a fiber mat as isotropic or anisotropic. Using the results, we analyzed the RTM process conditions of the bogie frame to predict skin void formation, mold filling time, and optimum location of vents depending on the permeability conditions.

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.41-46
• /
• 2010

WSN, or Wireless Sensor Network, consists of a multitude of inexpensive micro-sensors. Because the batteries in sensor nodes can not be replaced once they are deployed, the life of a WSN is absolutely determined by the batteries. So, energy efficiency of a network is a critical factor for long-life operation. LEACH protocol which divides WSN into two groups is a typical routing protocol based on the clustering scheme for the efficient use of limited energy. It is composed of round units which are separated into set-up and steady state. In this paper we propose a power saving scheme to minimize set-up phase itself and to involve a data comparison algorithm. We evaluate the performance of the proposed scheme in comparison with original LEACH protocol. Simulation results validate our scheme has better performance in terms of the number of alive nodes as time evolves and average energy dissipated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2017

Since year 2016, in Korea, the police department started to use drones to patrol violated vehicles on the highway area. They monitor vehicle drivers who use side ways on the highway during traffic congested hours of the season, drunken drivers, or violent drivers. They use the 'Spot Mobility' method which floats the drones for 30 minute period. However, this method is inefficient since it requires manually charging batteries, gathering data, and operate drones with many numbers of policeman. Therefore, in this paper, for the efficient patrol in this purpose, I have suggested an effectively manageable network system consists of many drones as the wireless network nodes and with small numbers of policeman in a wide highway area. To accomplish this, the two topologies of effective drone patrol network systems are designed and simulated in OPNET simulator for performance evaluation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.38-38
• /
• 2008

무선 통신에 사용되는 기판에서 passive device는 대부분 기판 위에 개별적으로 표면 실장 되고 있으며 전체 기판면적에 80% 정도를 차지하고 있다. 따라서 기판의 소형화, 경량화를 위하여 많은 면적을 차지하는 수동소자들을 다층인쇄회로기판(multi-layer circuit board)에 내장하는 내장형 수동소자(embedded passive device) 기술이 연구되고 있다. 본 연구원에서 개발한 복합재료는 무기물 충전제 $SrTiO_3$를 사용하였으며, 열가소성 수지로는 cyclo-olefin-polymer계열의 수지를 바탕으로 제작 하였고, 유전율7~7.5이고 유전손실은 0.0045이다. 또한 $SrTiO_3$/유기물 복합재료는 공정온도가 낮고 경제적인 유기물에 높은 유전상수를 갖는 무기물이 분산되어 있는 형태이며, 우수한 유전 특성, 화학적 안정성, 저온 제조공정, 제조단가의 감소, 패키징 크기의 감소 등의 장점을 갖는다. 개발된 재료를 기반으로 Multi-layer 구조를 이용한 다양한 용량대의 capacitor를 구현 하였으며, spiral inductor 와 내장형 spiral inductor를 구현하여 다양한 용량대의 inductor를 구현 하였다. 그리고 각각의 구조에 따른 inductance와 Q factor를 분석 하였으며, Q factor가 100이상인 high Q inductor도 구현하였다. 이렇게 구현된 내장형 수동소자는 기판의 크기의 감소와 제조 단가의 절감, 최소 크기의 기판을 구현하는데 응용이 가능 할 것으로 예상 된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5464-5468
• /
• 2011

This paper deals with the development of the safety lancet and the electric lancing device. The safety lancet, in which a needle and a protective cap become one body, is designed. It is to prevent the secondary contamination by needlestick injury because the needle is always in the protective cap except for a moment of blood-gathering. The electric lancing device powered by batteries is devised to be operated by the moving rod of solenoid hitting the lancet. and to be used after selecting the repeat or the single hitting mode. The impact force by a hitting rod, the expected life of battery and etc. are measured for product development. This lancing device can be also used for the bloodletting device of the oriental medicine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.639-642
• /
• 2014

If the power of the general is not supplied, Visual aids utilize solar power system. The power supply system of these, the role of the power regulator to manage the charging and discharging is very important. In recent years, by introducing the IT technology for the effective management of visual aids, it was supposed to add a device that uses the power consumption. Thus, the importance of power regulator has increased. Currently, the power regulator is installed inside the AtoN, if the accessibility is not ensured, there is a difficulty that can not be checked. In order to solve these problems, in this paper, you have installed the Blue-tooth module to the power regulator. Also, by using the Blue-tooth communication function of a smart phone, a radio check has implemented a possible monitoring system. Advantage of the system implemented is a simple configuration and low installation cost. Also, it is possible to check the state information of the real-time power supply regulator. In addition, it has the effect of preventing accidents and reducing costs of inspection.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.543-554
• /
• 2022

In this study, the government's investment, laws, regulations, and difficulties related to IoT radio technology in the energy and medical fields are mainly analyzed. Also, plans for dissemination, technology preemption, and commercialization are derived to enhance global competitiveness. Research on ways to secure and predict radio wave application technologies in energy and medical fields, and to alleviate barriers to entry for new business operators. Analyzes the efficiency of support measures using expert groups in each energy and medical field, analyzes the utilization value of accumulated data, and proposes mid- to long-term promotion systems and support measures, as well as utilization measures of data held by external agencies related to radio waves.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.459-464
• /
• 2023

The mobile house of this article is provided with stand-alone power system that uses photovoltaic energy and enables sensing and environmental monitoring. Excess power generated is stored in lithium batteries, which enable smooth operation of the mobile house even in environment in which solar energy cannot be used. The house has been designed that its systems can be operated continuously by diesel power generation even when photovoltaic energy cannot be generated due to long rainy season or heavy snow. BMS (batter management system) has been constructed for photovoltaic and power management, and monitors the charge/discharge and usage amount of photovoltaic energy. Various sensing data are recorded and transmitted automatically, and the design allows for wireless monitoring by means of computer and smartphone app. The container house proposed in this study enables efficient energy management by performing optimal energy operation in remote areas, parks, event venues, and construction sites where there is no system power source.