• 한국분무공학회지
• /
• 제18권3호
• /
• pp.132-139
• /
• 2013

Smoke emissions from light duty diesel vehicles were measured using light extinction method with the free acceleration test mode. The smoke emissions for each measurement cycle of the free acceleration method showed large variations according to driver's pedal pushing pattern. The smoke values for each measurement cycle initially increased and reach a peak value. Integration of the smoke emissions with time for each measurement cycle was performed to get a representative smoke value which was obtained by averaging the integrated results. Two kinds of integration time range were used. One is range over the whole measurement cycle of the free acceleration method. The other is only the acceleration range in the measurement cycle. Overall, variation of the representative smoke values obtained by the integration method was reduced comparing to the traditional representative smoke value which was obtained from a peak smoke value over the measurement cycle. Ten vehicles of the same model with 2.5 liter diesel engines, and seven vehicles of the same model with 2.7 liter diesel engines, were tested using the free acceleration test method.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 추계학술대회 논문집
• /
• pp.62-65
• /
• 2008

In this paper, we estimated the D147 mode test, which is introduced as a new emission test mode for the driving car using diesel fuel. And we compared the D147 test mode, Lug-Down3 test mode and no load acceleration test mode. And the exhaust gas concentration between the three modes was compared. The exhaust concentration at the D147 mode is lower than the exhause concentration at the Lug-Down 3 mode and higher than that at the no load acceleration test mode. Also the correlation factor was estimated between the D147 mode and Lug-Down 3 mode.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.98-103
• /
• 2004

Diesel engine offers superior fuel consumption than gasoline engine of equivalent capacity. For this reason, diesel engines are widely used in heavy duty transport applications. Specially, it has been many years that exhaust gases from gasoline automobile rather than from diesel is the major object concerned by Korea and other countries, and it is strongly required on the reduction techniques on harmful NOx, Soot, CO, He. Thus, this paper focused on the emission reduction and target for this paper is heavy-duty diesel engine equipped with power filter such as wet type air cleaner. In this paper, the performance, exhaust emissions(CO, THC, NOx, Soot) and noise of heavy-duty diesel engine were measured at maximum load condition and the range of 1,000∼2,200rpm. The smoke was measured at FAS(Free Accel Smoke) test mode.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.40-46
• /
• 2020

Inspection of vehicle systems is regularly performed by the state to ensure the emission status and the safety of vehicles. Thereby, the safety and quality of life can be improved by reducing green-house gases and fine dust, which are the main causes of vehicle defects and air pollution. This study analyzed the soot measuring probes used in the free acceleration mode method, at no-load condition, looking at the efficiency of a probe to measure soot emissions from diesel vehicles. In this study, a technique that can improve the inhalation efficiency of the probe over the (a) probes and the improved (b) probes was applied to probes (c). Probe (c) involves a structure designed close to the center of the circumference of the exhaust pipe. Results showed that the suction efficiency was improved by adding a variable center unit.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.1-8
• /
• 2012

Characteristics of smoke emission in light duty diesel vehicles was investigated according to the year of production, engine displacement volume, and mileage. The smoke emission was measured using light extinction smoke measurement method under free acceleration test mode. Total number of the tested vehicles was 180. The year of production of the tested vehicles distributed from 2002 to 2007. The displacement volumes of the tested vehicles were categorized as 2-liter, 2.5-liter, 2.7-liter, and 3-liter. The mileage of the tested vehicles distributed from 20,000 km to 400,000 km. The more recent in the year of production of the tested vehicles did not show clearly lower in smoke emissions. Smoke emission showed different values according to driver's pedal pushing pattern. Also, smoke emission peak for each free acceleration test initially increased and reach a maximum of the peak values. Afterwards, the smoke peak gradually decreased as number of test increased. A new guide line was proposed to determine the smoke value from the light duty diesel vehicles based on smoke emission peak patterns which were obtained with several repeated free acceleration tests.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.232-232
• /
• 2023

고속도로 및 편의시설 건설로 불투수층의 면적이 증가하여 강우 시 고속도로 및 편의시설에서 발생하는 오염원에 의한 하천의 수질 영향도 커지고 있다. 특히 휴게소에서는 자동차의 급가속, 급감속으로 더욱 많은 분진과 오염물질이 발생할 수 있으며 타이어 마모 입자, 자동차 배기가스, 중금속 및 오일류 등이 휴게소나 도로 지표에 집적되어 있다. 이렇게 발생한 오염물질은 우기에 강우와 함께 불투수면을 침투하지 못하고 배수로를 통해 유출되어 인근 하천의 수생태 및 토양의 주요 오염원으로 작용하고 있다. 이에 따라 고속도로 및 인근 휴게소의 비점오염 저감대책이 필요하며 효율적인 비점오염원 저감을 위해 장기적인 모니터링, 지속적인 자료 수집 및 분석이 필요하다. 본 연구에서는 강원지역 고속도로 및 인근 휴게소에서 강우 시 강우유출수 모니터링을 통해 강우유출수 유량가중평균농도 (Event Mean Concentration) 산정하고 강우유출수 수문곡선 (hydrograph)을 작성하였다. 또한 강우사상에 따른 분석항목별 초기세척효과(First Flush Effects)와 오염부하량을 산정하였다. 추가적으로 차량 기인 입자를 확인하기 위해 μ-FT-IR 현미경 분석 실험을 하였다. 모니터링 장소는 휴게소 및 고속도로 일원이며, 모니터링은 선행무강우일수 2일 이상, 강우량 10mm 이상일 때 실시하였으며 2022년 6월부터 10월까지 총 4회 실시하였다. 모니터링 결과 타이어 및 브레이크 패드 마모와 관련된 중금속인 Zn, Cu, Pb 등의 중금속이 높게 분석되었으며 이러한 중금속의 오염부하량 역시 높게 산정되었다. 강우유출수 수문곡선에서 강우 초기 오염물질의 세척효과가 나타났다. MFFn 산정 결과 강우 30% 구간에서 초기세척효과를 보였다. μ-FT-IR 현미경 분석 결과 PE (Polyethylene)가 가장 많이 검출되었고 PP (Polypropylene), PS (Polystyrene) 순으로 검출되었다. 이러한 강우유출수 모니터링 데이터는 향후 고속도로 휴게소 및 고속도로 주변 오염저감 시설 설치 및 사회적 동참을 위한 타당한 근거 확보를 위한 기초자료로서 제공될 수 있을 것이다.