• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.145-154
• /
• 2007

In this paper, a study on the actuator device technology in guided weapon system development. Hydraulic and pressure, electric motor device had been mostly used, but recently due to high output to weight ratio, pressure actuator device is widely used except for small tactical guided ammunition which needed small power. And now the actuator design concept and technical level is changed because of high mobility of guided ammunition, development of magnetic materials which used new material for requirement of despondence, progress of control and electrodynamics technology, and digitalize and integrity. In this paper we clearly proposed the actuator design criteria and detailed technology development trend for next generation guided weapon system.

• Convergence Security Journal
• /
• v.11 no.3
• /
• pp.11-17
• /
• 2011

The acquisition of weapons systems test and evaluation in the early stages of the acquisition process as a source of data used for modeling and simulation are being actively encouraged. Thus, in the reliability of weapon systems acquisition can be called the most important part, and M&S to apply for this test reliability and accuracy of the assessment can provide, test time and cost savings, the pre-and post-test predictions and available data can provide. In this study, theoretical study of M&S to acquire weapon systems used for the importance of M&S, acquired the characteristics of the model, utilization for weapon systems acquisition, and weapon systems acquisition review for an effective utilization of M&S tries to find out.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.247-276
• /
• 2017

The protection of space asset has been new major cause of space militarization. For such purpose, it has been officially announced that a policy of deterring and denying any adversaries from accessing the outer space. Space militarization is to be conversed into a new concept of space weaponization. The USA has announced its policy of space weaponization, while China and Russia have not revealed their plan or policy. Latter States, however, have proposed a draft treaty limiting the deployment of warfare in the outer space. The terms of the Outer Space Treaty, reflecting three significant United Nations General Assembly resolutions from the 1960s, support the position that ground rules must be observed in the exploration and the use of outer space, particularly in the absence of specific space law rules. Yet the combination (and culmination) of these two approaches to the legal regulation of outer space-specific rules as and when agreed by the international community and the translation of principles developed for terrestrial regulation to outer space-still leaves much room for uncertainty and exploitation for military and strategic purposes. As space weaponization may contribute to deterring the use of weapon, it may be not against the UN Charter Article 2(4). If space weaponization might generate the space debris such that the outer space is no more available for exploration and use, it is against the proportionality principle and discrimination principle enshrined in the laws of the war. But, if the limitation upon the kind and use of space weaponization is agreed among the States, then the space weaponization may not be against the laws of the war, and be considered permissible within the rationale of limited war.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1896-1902
• /
• 2013

As a concept that commercial parts are applied to weapon systems, Commercial Off-The-Shelf(COTS) was not well-received at a time when defense technology led commercial technology. However, the exponential growth of IT and the rapid expansion of commercial industry have made possible to make the cost low through mass production system within a short period, and the benefit of cost and schedule has been highlighted, triggering commercial parts to be applied to weapon systems. In order for commercial technology to be used in defense weapon systems, its performance in an extremely restricted condition of combat environment should be guaranteed. Generally, commercial parts have fundamental limitation in that the design and production requirements for commercial parts are different from those for the military. Therefore, it is required to confirm that commercial parts can be used for weapon systems through the approach of system engineering. This study presents the process tailored to characteristics of marine defense system and the method of analyzing its restricted condition in order to apply COTS to marine defense system. The study classifies the restricted conditions into general and special environments, suggests detailed process, and suggests useful tools to select appropriate items adapted to these restricted conditions in the commercial market. Lastly, as a case study for COTS applied to marine defense system, the study finds out the analysis results of application of COTS and restricted conditions of the warship electric system.

• Journal of the Korea Society for Simulation
• /
• v.30 no.3
• /
• pp.11-17
• /
• 2021

The 30mm anti-aircraft gun has been developed with various types of weapon systems such as protective, protective complex, and wheel-type anti-aircraft artillery. The role of this anti-aircraft gun is an important anti-aircraft weapon in charge of air defense. Anti-aircraft weapons are tasked with defending the airspace from aircraft attacks. In particular, anti-aircraft weapons are organized in combination with mechanized units. And anti-aircraft weapons are prone to attack by enemies because they operate on the front lines of the battlefield. The enemy is expected to attack our troops by covering up or concealing as much as possible in order to increase their viability. Therefore, this study analyzed whether our 30mm anti-aircraft bullets could subdue the enemy in cover. This study analyzed the performance of 30mm anti-aircraft bullets using the M&S technique. For this study, live shooting and simulation method by M&S were used for the experiment. In this study, steel plate and plywood were used for the live shooting experiment. In addition, in the simulation process through M&S, this study used the PRODAS model, AUTODYN model, and Split-x model to analyze the trajectory, penetration, and fragmentation capability of 30mm anti-aircraft bullets. According to the experimental results, it has been proven that 30mm anti-aircraft bullets can destroy enemy armored vehicles. 30mm anti-aircraft bullets succeeded in quickly subduing enemies concealed in general buildings or forests. In this way, it was possible to minimize damage to allies in advance.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.298-302
• /
• 2003

Inorganic Crystal Structure Database, the essential information in the chemistry field for synthesis and property research of inorganic materials, has been constructed. The data source is obtained from the FIZ-Karlsruhe, about 65, 000 records of the coverage period is 1915 year to present. This paper describes the database schema and retrieval system of the Inorganic Crystal Structure Database designed for the speedy and efficient retrieval, especially developed into supporting numeric retrieval of the crystal structure cell parameter.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.12-12
• /
• 1998

무기체계의 추진체로서 고체 로켓트 추진기관이 제작의 용이성, 구조의 간단성, 이에 따른 저렴한 제작비, 그리고 고 신뢰도 확보가능 등의 여러 장점으로 대부분의 현존 전술 유도무기에 채택되어 사용되어 오고 있으나 대응, 방어 무기체계의 빠른 발전으로 이에 따른 새로운 추진기관의 유도무기체제가 요구되고 있다. 램제트 기관은 공기흡입추진기관으로 상대적으로 높은 비추력(1000-2000s)과 추력 중량비(∼20)을 가지며, 이로 인해 기존의 로켓 엔진에 비해 4-5배의 성능을 낼 수 있으며, 초음속 장거리 비행에 적합하다며, 또한 높은 속도영역까지 운용가능하고 구조가 비교적 간단하다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.253-258
• /
• 2005

It is necessary to determine a nitrogen supplying capacity (NSC) of soil for sustainable agriculture. NSC has been decided by directly detecting N mineralization potential (NMP) and inorganic nitrogen or by indirectly approximating from organic matter and chemical properties of soil. NMP is best method for NSC but it takes long period. A study was conducted to find a short-term incubation method using pepsin through 1) determining NMP of 3 upland and 3 paddy soils, 2) establishing analytical condition of pepsin digestion by comparing to NMP, 3) validating with relations to N requirements for maximum yield of rice. NMPs of 6 soils were ranges from $63mg\;N\;kg^{-1}$ to $156mg\;N\;kg^{-1}$. The pepsin digestion method of soil nitrogen was established by determining amino nitrogen from digesting 5 g of soil for 30 minutes by 0.02% pepsin. This method was so highly correlated with a maximum rate of nitrogen fertilizer that it could be used for determining NSC in paddy soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.39-45
• /
• 2017

In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.1-9
• /
• 2019

This research aims to empirically explore the link between evaluation management and performance of indefinite-term contract workers in local governments, perceived by public officials who are responsible for managing indefinite-term contract workers in local governments. In addition, this study examines the moderating effect of training for the relationship between evaluation management and performance. The results show the positive relationship between evaluation management and performance with the moderating effect of training for the link. This research contributes to expand the scope and level of the literature on indefinite-term contract workers through suggesting the empirical evidence among evaluation management, performance and training. Furthermore, the empirical results of this study have useful implications for local governments and public officials to construct management guidelines for indefinite-term contract workers.