• Communications of Mathematical Education
• /
• v.19 no.3 s.23
• /
• pp.471-484
• /
• 2005

무게중심에 관련된 연구는 수학과 물리, 수학과 공학 분야에서 폭넓은 활용을 가지는 간학문적 접근의 한 예이며, 실생활에서의 경험을 수학적 개념 및 방법에 관련시킬 수 있는 흥미로운 영역이라 할 수 있다. 본 연구에서는 문헌연구를 통해 균일한 다각형판의 무게중심 개념을 소개하고, 삼각형판과 볼록사각형판의 무게중심의 위치 및 성질을 조사하고, 이를 확장하여 볼록n각형판에서 무게중심의 위치를 탐구하였다.

• Composites Research
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2007

This study was performed to make a comparison on low-velocity impact behavior between graphite/epoxy composite laminate and steel plate. In order to validate the proposed scheme fur the impact behavior of the plate, the Karas's impact model was used. The impact models for this comparative study are the graphite/epoxy composite plate having $[0/90/45/-45/-45/45/90/0]_{8S}$ laminate sequence and the steel plate with a steel ball impactor. The low-velocity impact behaviors for two types of plates were comparatively investigated and performed by considering different impactor velocities and weights respectively. In this investigation, it was found that the composite laminate has impact energy absorption effect due to more flexible behavior than the steel plate, and also it has better characteristics on impact damage and weight.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.635-640
• /
• 2003

본 논문에서는 일본 차량 번호판 인식에 적응적 탬플릿 마스킹 방법을 이용하여 번호판 문자, 숫자를 분할하고 패턴벡터기법을 이용하여 인식하는 방법을 제안하였다 주, 야간과 거리에 따른 일본 차량 번호판 영상을 입력받아 전처리 과정을 수행한 후 에지 정보와 명도값 변화의 빈도수를 이용하여 번호판 영역을 검출하였다 검출된 번호판 영역에서 각 문자 및 숫자의 위치정보와 적응적 탬플릿을 이용하여 분할하고 번호판의 지역문자를 무게중심 패턴으로 분류 한 다음 크기와 이동에 무관한 특실을 가지는 패턴 벡터를 적용하여 문자를 인식하였으며, 숫자는 Four Segment Pattern을 이용하여 인식하도록 하였다 본 논문에서 제안한 방법을 실제 일관 차량 번호판 인식에 적용한 결과 98.8％ 추출율과 96.6％의 인식율을 나타내었다.

• Composites Research
• /
• v.33 no.5
• /
• pp.288-295
• /
• 2020

Fiber-reinforced composite laminates have high specific stiffness and strength and are expected to be useful for weight reduction in weight-sensitive industries, such as automotive and aerospace. However, designing composite laminates is often dependent on designer's experience and intuition because of difficulties in determining the number of plies and stacking sequence, which tends to lead to over-design. In this study, optimal design of composite laminates was performed to minimize weight, while withstanding the given load. Based on the enumeration method, all combinations of stacking sequence satisfying the design guideline for composite laminates were considered. Composite laminates were discretized into panels. Optimal number of plies and stacking sequence for each panel were determined considering local load on each panel and contiguity across adjacent panels. Failure index from Tsai-Wu criteria was optimized for strength and buckling analysis was performed for compressive load. Stacking angles of 0, ±45 and 90° were used.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.674-686
• /
• 2011

Choosing a seismic source and geophone type including a coupling method can be the most important factor in shallow seismic surveys. We studied the characteristics of seismic signals by analyzing 6 different seismic data sets that collected from several sources and geophone conditions. Geophones attached to weight plate (1.8 kg) can be easily and economically installed on the paved road where geophones with spikes would cause the coupling problem. In addition, experiments in this study revealed that a small handy hammer can be used as a seismic source by striking the paved road to generate the seismic signals within 200 ms two-way travel time. Attaching weight plates to geophones may change the geophone response curve which generally depends on the geophone mass, but the change seems not to give significant differences in the first arrival of refracted wave and in the pattern of reflection events. Consequently, using weight plates on paved roads can be an efficient and cost-saving method in the near-surface high-resolution seismic surveys.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.253-258
• /
• 1996

원자로의 가동 중지 중이나 재장전시 원자로가 설치되어 있는 수조의 냉각수가 증기발생기 안으로 유입되는 것을 막는 장비로써 노즐댐을 사용한다. 현재의 노즐댐은 알루미늄 재질로 그 무게가 무거워 노즐댐 작업자가 취급하기 어렵다. 이 노즐댐의 경량화와 동시에 구조적 강도를 증가시키기 위해서 비강성이 높은 탄소섬유 강화 복합재료와 굽힘 강성 및 전단강성을 증가시키기 위하여 벌집구조(honeycomb)의 알루미늄을 사용하여 KAERI 노즐댐-II를 설계하였다. 노즐댐에 발생하는 응력 해석을 통하여 중앙판과 측면판의 변위가 충분히 작은 값을 가지면서 파괴지수도 충분히 작은 값이 되는 탄소섬유의 적층각도를 구하였으며, 중앙판은 ［$\pm$15］로 적층하고 측면판은 ［$\pm$45 ］로 적층 하였다. 그리고 각 판의 최대 파괴지수는 중앙판의 경우 0.32, 측면판의 경우 0.27 이었고 최대변위는 각각 3.1mm, 2.7mm로 노즐댐을 사용할 때 예상되는 하중에 대하여 노즐댐의 구조적 건전성을 입증하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.140-147
• /
• 2003

A detection technique is studied to determine the location and the weight of an intruder into infrastructure using fiber optic ROTDR (Rayleigh optical time domain reflectometry) sensor. Fiber optic sensing plates buried in sand are prepared to measure the intruder effects. The signal of ROTDR was analyzed to confirm the detection performance. The constructed ROTDR system could be used up to 12km at the pulse width of 30ns. The location error was less than 3m and the weight could be detected into three levels of grade, such as 20kgf, 40kgf and 60kgf.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.19-20
• /
• 2014

연료전지 스택을 구성하는 핵심 부품 중 하나인 분리판(Bipolar plate)은 반응 연료인 수소와 산소를 분리하여 셀(cell)의 전면적에 균일하게 분배, 공급, 배기 및 전기화학반응에 의해 생성된 전류를 수집하며, 높은 가스밀폐성, 전기전도성 및 내식성이 요구된다. 분리판 소재로는 흑연, 고분자-탄소 복합체 및 금속 등이 사용되고 있으며, 이중 연료전지 스택의 부피, 무게 및 제조비용 감소를 위하여 금속분리판이 주목받고 있다. 그러나 금속분리판의 경우 연료전지 작동환경에서 부식반응에 의한 이온 용출로 인해 전극촉매나 고분자전해질막의 오염을 유발할 수 있다는 단점이 있어 최근 금속계 분리판의 코팅을 통하여 분리판의 내식특성 및 전기적 특성을 향상시키는 연구가 활발히 진행되고 있다.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.949-956
• /
• 2006

The development of flip-graft, yield of antler and growth of antler in Sika deer, Red deer and Elk were investigated to establish the technology of transplantation of flip-graft. Pedicle flip-grafts were transplanted on the sides pedicle, on the midline of forehead and on the middle line of the skull. The success rate of transplantation was 42％, 5 animals out of 12. The yields of antler and number of point were 716g and 1,071g, and 2.3 and 1.0 in control and donor of flip-graft, respectively in red deer. The length and weight of anther of recipient of flip-graft in elk were 17cm, 302g. The length and weight of hard antler of recipient of flip-graft in red deer were 26cm and 122g. Flip-graft should be transplanted on the scull after removal of the corium for strong adherence.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.1031-1037
• /
• 2010

This paper proposed lightweight aluminum bipolar plates as an alternative for conventional graphite bipolar plates in fuel cell systems used as a power source for small reconnaissance UAVs. Since bipolar plates occupy more than 80% of the total weight of the fuel cell system, lightweight aluminum bipolar plates can improve the overall payload and flight time of the fuel cell UAV. The aluminum and graphite bipolar plates were fabricated to compare the performance of each of them. A 15% higher performance per weight was obtained from aluminum bipolar plates than the graphite bipolar plates. Also, the performance of a single cell using aluminum bipolar plates was evaluated under various operating conditions.