• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.789-796
• /
• 2016

The weight of an antenna system pointing satellite on the mobile platform is restricted by the weight limit of the mobile platform. The maximum power of the actuator driving the antenna system is thus limited because a high power actuator needs a heavier weight. Thus, a drive system is designed to have a low torque requirement by reducing the gravitational torque depending on gravity or acceleration of the mobile platform, including vibration, shock, and accelerated motion. To reduce the gravitational torque, the mathematical model of the gravitational torque is preferentially obtained. However, the method to directly estimate the mathematical model in an antenna system has not previously been reported. In this paper, a method is proposed to estimate the gravitational torque as a mathematical model in the antenna system. Additionally, a method is also proposed to calculate the optimal weight of the balancing weight to compensate for the gravitational torque.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.1
• /
• pp.143-160
• /
• 1998

PURPOSE This studied the biomechanical body segment parameters of Korean adults with reference to Sasang Constitutional Medicine(SCM). We anlyzed the characteristics of Sasang constitution through Body Measurement, Immersion Method, and Reaction Board Method. SUBJECT Subjects were 72 persons. There were made 49 and Female 23. Mean age was . And There were Taeumin 30, Soyangin 17, and Soeumin 25. METHOD The items of Body Measurement were 51. Limbs were measured right side. Volume was gained with Immersion Method and Weight was calculated with the density equation for limbs from Drills and Contini. Center of Mass was gained with Reaction Board Method. RESULT 1. In Body Measurement there were the significant differences with each constitution of man's circumference. 2. In Volume there were the significant differences between Taeumin and Soeumin in mand. And the volume rate of head and neck, hand, and foot was the lowest in Taeumin, but the highest in Soeumin. 3. In center of mass Soyangin was higher than others.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.380-388
• /
• 2023

This study estimates the metacentric height (GM) of a model ship by varying the transverse weight distribution, considering the effects of the roll period and moment of inertia, and compares it with the GM values measured by the inclining test. In the process, the relationship between the values is analyzed. Three types of ships-a 7-ton fishing vessel, 20-ton fishing vessel, and KRISO Very Large Crude-oil Carrier (KVLCC)-were used for the experiment and comparison. The roll period and moment of inertia were measured using the free roll decay and swing frame tests, and the GM was measured using inclining test. The estimated GM from the roll period and moment of inertia showed the same trend as the GM measured using the inclining test in the change of the weight distribution. However, the GM values measured using the inclining test were lower. Therefore, additional correction factors or parameters other than the roll period and moment of inertia are necessary for estimating GM. In the future, the relationship between the weight center and the estimated GM will be analyzed to derive the correction factors.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.12-21
• /
• 1997

차량충돌에 대하여 운전자의 안전확보를 위하여 새로 개발한 철재 중앙분리대에 대한 안전성 분석을 위하여 인체모형을 탑재한 실물차량 충돌실험을 실시하였다. 인체모형의 두부와 흉부, 대퇴부 및 차량의 무게중심점에서 가속도와 충격하중을 계측하여 철재 중앙분리대 방호울타리에 차량충돌시 운전자의 안전성을 검증한 결과 다음과 같은 결론을 도출하였다. 1) 철재 중앙분리대 방호울타리는 콘크리트 중앙분리대 방호울타리에 비해 운전자의 신체 상해치와 차량파괴 등에 있어서 뛰어난 충격흡수성능을 보여주었다. 2) 철재 중앙분리대 방호울타리는 콘크리트 중앙분리대 방호울타리의 경우 빈번히 발생하는 차량전복과 같은 2차사고의 유발 가능성이 전혀 없는 구조적 안정성을 보여주었다. 3) 경량의 차량충돌에 대하여 자체 탄성영역내에서 충격을 흡수하여 유지보수 측면에서 유리함을 나타냈다. 4) 충돌 수 충돌차량에 대한 차량유도성능이 뛰어났으며, 차량의 충돌후 이탈각도는 충돌각도의 60% 이내로 나타났다. 5) 철재 중앙분리대 방호울타리로부터 분리된 파편이 거의 없어 도로소통에 지장을 초래하지 않는다.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.254-254
• /
• 2017

• Korean journal of communication and information
• /
• v.66
• /
• pp.110-132
• /
• 2014

This study attempts to redefine the concept of 'fairness' of Korean public broadcasting and tries to build a new model for evaluating the fairness of Korean public broadcasting. The author insists that the fairness in public broadcasting consists of binary components of the public and rightful reporting, and views that the public reporting represents of neutralness, balance and impartiality while the rightful reporting represents of factuality, multiplicity and the protection of social minorities. The author suggests that two criteria of the public and rightful reporting results in four models of 'shepherd', 'acrobat', 'tribune', and 'trumpeter' in accord with its focus on the public and the rightful reporting. Survey toward the professionals in public broadcasting in academia was conducted and addressed the fact that Korean public broadcasting is close to the trumpeter model with some feature of acrobat.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2020

Medium to large post structures installed along the roadside without proper protection can lead to serious vehicle damage and occupant injury at the impact. In North America and Europe, splitting systems such as slip base or breakaway device are used to reduce impacts. But the system has the risk of secondary accident when the splitted post falls down to the traffic or pedestrian. Sliding Post have been proposed as a way to solve this problem. By studying the crash test results of the 1.3ton and 0.9ton vehicle with 60 km/h and 80 km/h to a Rigidly Fixed Post (RFP) and Sliding Post (SP), danger of the conventional RFP and crashworthiness of the SP have been proven. While collision analysis only from the acceleration measured at the center of the vehicle assumes the motion of the post is the same as that of the vehicle, in this paper, by adding high speed film data to the analysis with vehicle acceleration could have separate the post motion from the vehicle motion. It gives better explanations on the movement of post and vehicle in each distinctive time step and provides basics to the crashworthy post design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.