• Title/Summary/Keyword: 묘사방법

Search Result 500, Processing Time 0.028 seconds

Bladder And Rectum Dose Define 3D Treatment Planning for Cervix Cancer Brachtherapy Comparison of Dose-Volume Histograms for Organ Contour and Organ Wall Contour (자궁경부암의 고선량률 근접치료시 장기묘사 방법에 따른 직장과 방광의 선량비교 분석)

  • Kim, Jong-Won;Kim, Dae-Hyun;Choi, Joon-Yong;Won, Yeong-Jin
    • Journal of radiological science and technology
    • /
    • v.35 no.4
    • /
    • pp.327-333
    • /
    • 2012
  • Purpose: To analyze the correlation between dose volume histograms(DVH) based on organ outer wall contour and organ wall delineation for bladder and rectum, and to compare the doses to these organs with the absorbed doses at the bladder and rectum. Material and methods: Individual CT based brachytherapy treatment planning was performed in 13 patients with cervical cancer as part of a prospective comparative trial. The external contours and the organ walls were delineated for the bladder and rectum in order to compute the corresponding dose volume histograms. The minimum dose in 0.1 $cm^3$, 1 $cm^3$, 2 $cm^3$, 5 $cm^3$, 10 $cm^3$ volumes receiving the highest dose were compared with the absorbed dose at the rectum and bladder reference point. Results: The bladder and rectal doses derived from organ outer wall contour and computed for volumes of 2 $cm^3$, provided a good estimate for the doses computed for the organ wall contour only. This correspondence was no longer true when large volumes were considered. Conclusion: For clinical applications, when volumes smaller than 5 $cm^2$ are considered, the dose-volume histograms computed from external organ contours for the bladder and rectum can be used instead of dose -volume histograms computed for the organ walls only. External organ contours are indeed easier to obtain. The dose at the ICRU rectum reference point provides a good estimate of the rectal dose computed for volumes smaller than 2 $cm^2$ only for a midline position of the rectum. The ICRU bladder reference point provides a good estimate of the dose computed for the bladder wall only in cases of appropriate balloon position.

정밀묘사 전투모델 특성 및 운용

  • 박래윤
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2001.05a
    • /
    • pp.124-124
    • /
    • 2001
  • 한국군 워게임에서 사용되고 있는 시뮬레이션 모델은 주로 대부대 훈련 및 분석용 모델이 주류를 이루고 있다. 대부대 전투모델은 전투요소를 부대단위로 통합하여 부대를 모의 실체(entity)로 설정하고 부대 대 부대의 교전상황을 개략적으로 묘사하므로 개별무기체계의 성능 및 효과분석을 필요로 하는 정밀 전투실험이나 연구개발 및 획득분야의 적용에 많은 제한을 받게 된다. 이러한 대부대 개략묘사 전투모델과 대조적인 개념의 정밀묘사 전투모델은 단위무기체계별 교전상황을 상세하게 묘사하므로 주로 소부대 전장환경을 대상으로 하는 전투모의에서 활용된다. 최근 군사선진국에서는 국방환경의 변화와 함께 교육훈련 분야에서 합성전장 개념에 의한 과학화 훈련을 추진하고 있는데, 이러한 분야에서 사용되는 전투모델도 보다 상세한 시스템의 상호작용 묘사가 필요하므로 정밀묘사 기법을 적용하여 개발되어야 한다. 현재 국내에서 운용되고 있는 대표적인 정밀묘사 전투모델은 JANUS 모델과 EADSIM 모델을 예로 들 수 있지만, EADSIM 모델은 최근에 도입되어 실용화 연구 중에 있기 때문에 실제로는 한국국방연구원에서 운용하고 있는 JANUS 모델이 유일하다고 할 수 있다. 따라서 본 고에서는 먼저 전투모델 분류방법 고찰을 통하여 정밀묘사 모델의 특성을 분석하고 한국군 정밀묘사 전투모델의 운용실태와 함께 한국형 정밀묘사 모델 개발전략을 모색하기로 한다.

  • PDF

Comparative Study on Description Schemes to Perform Finite Element Analysis in Incremental Forming Process (점진성형의 공정평가를 위한 유한요소해석에서 묘사기법 적용에 관한 비교 연구)

  • Park, Jun-Soo;Byon, Sang-Min
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.36 no.9
    • /
    • pp.1073-1080
    • /
    • 2012
  • Incremental forming is a cold working process in which a small part of the material is being deformed and the area of local deformation is moving over the entire material. In this paper, we study description schemes to perform finite element analysis for the incremental forming. The selected description schemes to examine are the Lagrangian description and the arbitrary Lagrangian-Eulerian (ALE) description. The sliding boundary scheme coupled with ALE is also examined to overcome the distortion problems of elements on the contact surface. Results show that the ALE description with the sliding boundary scheme is most favorable in overcoming the distortion of elements. This description leads to make the simulation continued to the final stage of the incremental forming. On the other hand, the Lagrangian description as well as the original ALE description makes the elements much distorted and the analysis is stopped long before arriving at the final shape of deformation.

A study of the animation characters description at different times (시대에 따라 변하는 애니메이션 캐릭터의 성격 묘사 변화 연구)

  • Lin, Qu;Choi, Chul Young
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2015.05a
    • /
    • pp.311-312
    • /
    • 2015
  • 시대에 따라 스크린에 훌륭한 애니메이션 작품들이 존재해왔다. 이를 통해 수많은 훌륭한 애니메이션 캐릭터들도 함께 탄생하였다. 이러한 캐릭터의 이미지 특징들은 성격의 명암이 뚜렷하고, 시간이 흘러도 늙거나 변치 않는다는 요소들을 가지고 있다. 스토리는 캐릭터를 완성한다. 그러나 다른 한편으로는 캐릭터가 스토리의 완성도를 높이게 됨을 부인할 수 없다. 애니메이션 캐릭터가 가지는 성격의 중요성은 아무도 부정할 수 없다. 애니메이션에서 어떻게 뚜렷한 성격과 개성을 가진 캐릭터를 묘사를 해왔는지 본 논문은 시대에 따른 캐릭터 묘사의 요소를 분석하여, 캐릭터의 성격과 개성의 묘사방법을 찾아 보고자 한다.

  • PDF

Tile Mosaics Preserving Details - 2 Layered Tile Mosaics (세부 묘사를 유지하는 타일 모자이크 - 두 층 타일 모자이크)

  • Kang, Dong-Wann;Yoon, Kyung-Hyun
    • 한국HCI학회:학술대회논문집
    • /
    • 2006.02a
    • /
    • pp.800-806
    • /
    • 2006
  • 최근, 컴퓨터 사이언스 분야에서 모자이크에 대한 다양한 연구들이 이뤄지고 있지만, 세부 묘사를 유지하려는 관점에서의 접근은 부족한 편이다. 본 논문은 원 영상의 세부 묘사를 유지하는 타일 모자이크 방법을 제안한다. 이 방법은 타일간의 빈 공간을 제거하기 위한 겹쳐진 타일의 사용을 통해 구현된다. 본 논문에서 제시한 방법은 다음 세 단계로 구성된다. 첫째, 에지 회피 기법이 적용된 무게중심 보로노이 다이어그램(CVD:Centroidal Voronoi Diagram)을 통해 메인 타일의 위치를 얻는다. 둘째, 메인 타일들의 위치에 딜로니 삼각형화(Delaunay Triangulation)를 적용해 서브 타일의 위치를 계산한다. 셋째, 타일간의 관계를 고려해 타일의 크기와 방향성을 구한다. 위의 과정을 통해 타일 간의 빈 공간이 최소화되어 세부 묘사가 강화된 모자이크 영상을 얻는다.

  • PDF

Unit-Rectangle Exposure Method for Advanced Through-put in Electron-Beam Direct Writing Lithography (전자선 직접묘사에서 Through-put이 향상된 단위 矩形묘사방법)

  • Park, Sun-Woo;Kim, Chul-Ju
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.26 no.2
    • /
    • pp.112-117
    • /
    • 1989
  • This paper describes to the unit rectangle EB direct writing lithography method using SEM. This method has the constant exposure time to any rectangle pattern. In order to change the EB current according to various rectangle size for the constant exposure time, the supply current of condenser lens in controlled by BITMAP-IV CAD system. By this method, the resizing procedure of density pattern area is not needed to pattern data conversion, and the through-put ofr exposure is increased about 172 times compared with the unit scan exposure method.

  • PDF

A Study on 2-Layered Image Tile Mosaics Preserving Details of the Source Image (원 영상의 세부 묘사를 유지하는 두 층 이미지 타일 모자이크 방법에 대한 연구)

  • Kang, Dong-Wann;Park, Young-Sup;Seo, Sang-Hyun;Yoon, Kyung-Hyun
    • Journal of Korea Multimedia Society
    • /
    • v.9 no.10
    • /
    • pp.1282-1295
    • /
    • 2006
  • This paper proposes a method of image tile mosaics to preserve detailed depiction of the source image. This method enhance the shortcoming of the previous mosaic methods that cannot express the detailed depiction because of the gap between tiles. Our method is implemented by the usage of image tiles to preserve detailed depiction of the source image, as well as the usage of 2-layered tiles to.eliminate the gap between tiles. The method suggested in this paper are composed of following process. First of all, the position of the upper layer tile is located through a centroidal voronoi diagram to which an edge avoidance technique is applied, and the position of the lower layer tile is calculated using Delaunay triangulation. Secondly, discover the size and direction field of the tile considering the relation between tiles. Thirdly, adopt a photomosaic technique to use the image tiles. At this time, the technique of multi-level indexing is used to accelerate the speed of image searching. Through above process, the gap between tiles is minimized against other methods and a mosaic image with a maximized detailed description is achieved.

  • PDF

Model and Method for Post-Failure Analysis of Composite Structure (복합재 구조물의 초기파손후의 거동묘사를 위한 모델과 해석방법)

  • 김용완;황창선
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.3
    • /
    • pp.506-513
    • /
    • 1992
  • 본 연구에서는 복합재 구조물에 대하여 유한요소해석법에 현상학적 모델인 전 단지연해석을 도입하여 강성저하와 모재파손을 예측하고 변형률을 매개변수로 한 Wei- bull 함수를 섬유파손해석에 도입하여 초기파손후의 거동을 묘사하고자 한다. 그리 고 면내전단하중이 작용하는 경우에 대해 전단지연해석을 수행할 수 있도록 모델링을 확장했다. 모재균열의 존재로 인한 단층의 강성변화는 실험으로 측정이 불가능하므 로 유한요소해석을 수행하여 비교하였다. 이 모델로부터 전단강성의 저하를 평가하 는 방법을 사용하였으며, 모재파손의 밀도 예측도 평균변형률 개념으로 전단효과를 고 려할 수 있도록 수정하였다. 그리고 초기파손후의 거동을 점진적으로 해석하기 위해 비선형 유한요소프그램을 작성하고, 상기의 모델을 도입하여 초기파손후의 거동을 보 다 정확히 묘사할 수 있는 방법을 제시하고 예로서 평시편에 대해 해석하고 실험치 및 타방법의 결과와 비교하였다.

멀티미디어 데이터 검색 기법

  • 김경창
    • Communications of the Korean Institute of Information Scientists and Engineers
    • /
    • v.10 no.5
    • /
    • pp.32-41
    • /
    • 1992
  • 멀티미디어 데이터베이스에서는 영상(image), 음향(sound) 등과 같은 멀티미디어 데이터의 복잡한 구조로 인해 데이터 조작이 기존의 데이터베이스에서 처럼 단순하지 않다. 데이터베이스로부터 멀티미디어 데이터를 검색하는 데 있어서 중요한 것은 사용자의 질의와 멀티미디어 데이터의 내용(content)를 매칭하는 것이다. 일반적인 해결책은 키워드를 사용하거나 멀티미디어 데이터의 내용과 사용자 질의를 묘사하고 있는 텍스트 묘사(text description)를 사용하는 것이다. 이 때의 주된 문제점은 사용자나, 다른 시점의 같은 사용자가 동일한 개체(entity)를 다르게 서술하여 멀티미디어 데이터 내용의 묘사 (description) 와 사용자 질의의 묘사가 정확하게 매치되지 못한 데 있다. 그러므로 멀티미디어 데이터를 검색하는 동안에, 저장된 멀티미디어 데이터와 사용자 질의의 묘사들간에 근사(approximate) 매치가 통상 요구된다. 본 논문에서는 객체지향 및 자연어 인식 기법을 통하여 근사매치에 지능적(intelligent) 으로 접근하는 방법을 제안한다.

  • PDF

Two Layered Image Tile Mosaics (두 층 이미지 타일 모자이크)

  • Kang, Dong-Wann;Park, Young-Sup;Seo, Sang-Hyun;Yoon, Kyung-Hyun
    • Journal of the Korea Computer Graphics Society
    • /
    • v.12 no.2
    • /
    • pp.9-11
    • /
    • 2006
  • 본 논문은 원 영상의 세부 묘사를 유지하는 사진 타일 모자이크 방법을 제안한다. 이 방법은 타일 내부의 세부 묘사를 위한 사진 타일의 사용과 타일간의 빈 공간을 제거하기 위한 겹쳐진 타일의 사용을 통해 구현된다. 본 논문에서 제시한 방법은 다음 세 단계로 구성된다. 첫째, 에지 회피 기법이 적용된 CVD를 통해 메인 타일의 위치를 얻고, 딜로니 삼각형화를 이용해 서브 타일의 위치를 계산한다. 둘째, 타일간의 관계를 고려해 타일의 크기와 방향성을 구한다. 셋째, 사진 타일을 사용하기 위해 포토 모자이크 기법을 사용한다. 이때, 다단계 인덱싱기법을 통해 사진 검색의 속도를 높인다. 위의 과정을 통해 타일 간의 빈공간이 최소화되고 타일 내부의 세부 묘사가 극대화된 모자이크 영상을 얻는다.

  • PDF