• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.1002-1015
• /
• 2018

In this study, we analyzed the results of virtual clothing simulation according to the difference in the lateral neck point as well as the front and back shoulder inclination angles of the bodice foundation. Lim's (2016) (S) and Lee's (1999) method (L) were selected as the different setting for the lateral neck point. S1, S2, L1 and L2 were developed by changing the shoulder inclination angles. The SND and LND were developed by removing the darts in the S and L, respectively; in addition, the SND1, SND2, LND1, and LND2 were developed with different shoulder inclination angles. The results of S and L were similar with only slight differences observed in the armhole shape. However, the results of SND and LND were very different. The patterns of the S series were similar to each other, but the patterns of the L series were different. In addition, the patterns of the SND and LND series could not find a similar trend.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.137-146
• /
• 2020

The manual measurements of 182 unmarried women subjects in their 20s was classified 4-breast types. For the breast type classification, 4 factors were identified, such as overall breast factor, upper breast internal shape factor, breast volume factor, and lower breast external shape factor. The breast shapes were 'breast with well-grown upper part', 'flat breast', 'breast with well-grown lower part', and 'protruded breast'. The breast types can be differentiated in 10 items of actual anthropometric dimension the length between frontal neck point and nipple point, length between lateral neck point and nipple point, length between the breast inner points, nipple to nipple breadth, diameter below the breast, inner depth of breast, outer length of breast, length below the breast, length between breast outer point and upper breast point, and contour line length below the breast.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.563-575
• /
• 2024

This study analyzed 2D bodice sloper changes according to combinations of the lateral neck and shoulder points of a 3D mannequin's shoulder lines. The relationship between the 3D shape and 2D pattern was analyzed. The shoulder line was set to a default of 1cm in front of or behind the lateral neck point, 1cm in front or behind the lateral shoulder point and 1cm vertically above the lateral neck or shoulder point. When the lateral neck point was moved backward, the front neck depth, front and back shoulder height, and shoulder length in the 3D shape increased, whereas the back neck's depth and width decreased. In the 2D pattern, the back shoulder height decreased. As the lateral shoulder point moved backward, all items of the 3D shape showed little change. However, the front shoulder height for the 2D pattern decreased. Consequently, the back shoulder height increased, and the lateral neck point was raised vertically by 1cm. Meanwhile, only the back neck depth and shoulder length decreased while all other items increased; however, in the 2D pattern, the front neck width and shoulder line showed no notable change. The shoulder point was raised vertically by 1cm, and the front and back shoulder heights of the 3D shape and 2D pattern were decreased.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.131-140
• /
• 2013

Power shoulder look is most noticeable trend in women's wear in the 09/10 season. Specially jackets with sharper angle and wider shoulder became the best item since then, and were chosen for must-have item by fashion directors. Jacket occupied 50% in power shoulder items. Its shoulder angle was from 0 to 30 degree but items with 15 degree stood out among them. There are three methods to make power shoulder look jackets; shoulder extension method with moving shoulder tip up and sleeve cap height, method of extension and cutting sleeve cap with shorten shoulder length, and method of extension and moving shoulder tip up in the sleeve with shoulder line like raglan sleeve. As a result, shoulder angle is higher, starting point of shoulder line is closer to side neck point and shoulder point is extender to outside for appearance and fit. In shoulder extension method, the arm hole line was drawn with care by matching joining shoulder seam and setting the sleeve into the arm hole. In sleeve cap transformation, it is desired that starting point shoulder angle is moved closely to side neck point. In case of the sleeve with shoulder line, it needs to consider enough ease of shoulder and upper arm. For making patterns of power shoulder look jacket, it need to consider arm hole line, shoulder length, shoulder point position, sleeve cap height and sleeve width with interpretation design facts. In this study, through the analysis clothing construction method of power shoulder jacket, it is of help to pattern making for various power shoulder design items.