• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.397-405
• /
• 2022

Computed radiography (CR) systems, which convert an analog signal recorded on a cassette into a digital image, combine the characteristics of analog and digital imaging systems. Compared to digital radiography (DR) systems, CR systems have presented difficulties in evaluating system performance because of their lower detective quantum efficiency, their lower signal-to-noise ratio (SNR), and lower modulation transfer function (MTF). During the step of energy-storing and reading out, a baseline offset occurs in the edge area and makes low-frequency overestimation. The low-frequency offset component in the line spread function (LSF) critically affects the MTF and other image-analysis or qualification processes. In this study, we developed the method of baseline correction using mathematical morphology to determine the LSF and MTF of CR systems accurately. We presented a baseline correction that used a morphological filter to effectively remove the low-frequency offset from the LSF. We also tried an MTF evaluation of the CR system to demonstrate the effectiveness of the baseline correction. The MTF with a 3-pixel structuring element (SE) fluctuated since it overestimated the low-frequency component. This overestimation led the algorithm to over-compensate in the low-frequency region so that high-frequency components appeared relatively strong. The MTFs with between 11- and 15-pixel SEs showed little variation. Compared to spatial or frequency filtering that eliminated baseline effects in the edge spread function, our algorithm performed better at precisely locating the edge position and the averaged LSF was narrower.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.76-83
• /
• 1993

A morphological filtering algorithm using directional information is presented. Directional filtering technique is effective in reducing noises and preserving edges. The proposed directional filtering is composed of two stage filtering processes. The opening and closing operations in the lst stage are performed for the pixels is aligned to the vertical, horizontal, and two diagonal directions, respectively. The opening operation supresses the positive impulse noises, while the closing operation the negative ones. Then, each directional result and their average value are filtered by the opening or closing operations in the 2nd stage. The averaging operation diminishes the effects of Gaussian noises in the homogeneous regions. Thus, the morphological operation in the 1 st stageremoves the impulse noises and in 2nd stage reduces. Gaussian ones. The experimental results show that the proposed filtering is superior to the existing nonlinear filtering in the aspects of the subjective quality. Also, the morphological filtering method reduces the computational loads.