• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.153-162
• /
• 2002

This paper predicted the engineering constants of spatially reinforced carbon/ carbon composites and analyzed the mechanical behaviour of the kick motor nozzle. Those equivalent engineering constants are used to analyze the mechanical behaviour of the kick motor nozzle. Because the distribution of equivalent engineering constants is varying as change its structure, we made a program to predict engineering constants of spatially reinforced composites. The kick motor nozzle consists of graphite or spatially reinforced carbon/ carbon composites for the nozzle throat, carbon/ phenol for the nozzle entrance and the expansion part, and steel for the outer surface of the expansion part. The 4-D carbon/ carbon composite shows the smallest deformed shape of the nozzle throat, which has a favorable effect on the rocket thrust, and the most uniform deformation of all nozzle throat materials. In addition to analysis, ground firing tests of 4D C/ C nozzle throat and graphite nozzle throat were performed.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.59-64
• /
• 2024

In this study, we conducted research on a miniaturized transmission system suitable for ultra-compact electric vehicles, such as electric arts or small electric cars. While conventional electric vehicles eliminate multi-gear transmissions and control motor output or secure initial driving force through reducers, in vehicles like electric karts or compact electric cars, which have relatively small battery capacities, the driving range can be reduced or the motor can be stressed epending on the loading state. Therefore, in this study, we developed a low stage ratio 0.625 and high stage ratio 1.6 a two-stage transmission system that can change gears as needed, considering factors such as slope conditions and loading status, by applying the continuously variable transmission (CVT) mechanism. Based on the selected gear ratios, we designed the transmission and created a test rig to verify the power transmission efficiency of the developed transmission. Using the test rig, we varied the rotational speed and load of the transmission to confirm its power transmission characteristics and also examined the heat generation characteristics during shifting and operation. As a result, developed a two-stage transmission with a CVT structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.774-780
• /
• 2021

The auxiliary power unit (APU) of a rotorcraft starts the engine during operation/flying. The APU is composed of a gas turbine engine type. The starting principle of the component is that the electric start motor generates the power required for starting by rotating the shaft. In this study, quality improvement was performed by applying an over-running clutch (ORC) between the APU and the starter motor to secure the operability of the starter motor of the APU mounted on the rotorcraft. The starter motor has the main role of starting the APU, but during operation, it is rotated without load by the rotational force of the APU gear shaft, resulting in friction at the brush. This phenomenon causes abrasion of the brush of the starter motor. Consequently, when the APU operation time increases, the brush life decreases, and the operability of the APU is affected. In this study, an ORC that separates the interlocking between the start motor brush abrasion and the APU operation time was applied to improve the operability/durability of the APU starter motor. The effect was verified through a test, and the technical feasibility of the design change was analyzed.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.133-134
• /
• 2016

Drill ship 또는 Semi-rig와 같은 대형 선박의 주요 부하들은 Diesel generator로부터 전력을 공급받게 된다. Generator의 용량은 최대 부하 용량에 의해 설계가 되며, Thruster와 같은 모터부하에 의해 Diesel generator에서 공급해야 하는 용량이 매우 증가하게 된다. 따라서 Thruster의 전원을 적절한 분산전원으로 대체함으로써 Generator의 최대 용량을 줄일 필요성이 있다. 본 논문에서 기존 선박 전력계통에 Thruster의 전원을 공급할 수 있는 Energy storage system (ESS)를 추가하여 Diesel generator의 최대 용량 감소 및 에너지 효율 향상을 전기적 모델을 통하여 검증하고자 한다. 그리고 최종적으로 실시간 모의시험 장치를 통하여 전체적인 선박의 연료 절감 효과를 검증하고자 한다.

• Journal of the KSME
• /
• v.33 no.2
• /
• pp.145-151
• /
• 1993

전자산업이 고도화되어감에 따라 전자기술은 소재 . 기계분야와 복합된 기술의 발전이 가속화 되어 가고 있다. 특히 이 글에서는 응력해석 CAE 기술이 전자부품산업에 적용되는 사례를 소 개하고자 한다. 그 중 하나는 하드디스크의 정밀부품 중의 하나인 스핀들 모터용 Hub의 절삭 가공시 고려하여야 하는 탄성 변형량을 해석하고 이를 적용하는 사례이고 또 하나는 Audio Deck의 Capatan Shaft를 지지하는 플리스틱 Base가 신뢰성 시험도중 또는 고온 부하시 발생하는 크리프현상을 해석하여 적용하는 사례이다. 이 글에서 소개하는 두 가지 사례는 전자부품산업에 응력해석 CAE를 적용할 수 있는 예들 중 빙산의 일각에 불과할 뿐이고, 이와 유사한 전자부품에 응력해석 CAE를 적용할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1157-1162
• /
• 2011

The parking brake is an essential unit embedded in the track-driving motor of an excavator. The parking brake plays an important role in keeping the excavator in place not only when it is parked, but also during the digging operation. In fact, the load placed on the parking brake during the digging operation is significantly higher than the parking load, because the impact and rating loads caused by the bucket digging force cycle frequently and have very high load ranges. Therefore, the load conditions during the digging operation should be taken into account in the parking brake certification test. In this study, a series of experiments was carried out in which various operating pressures were applied to the parking brake, where repeated loads were reciprocally placed on the brake by locking the multifriction disc and releasing the hydraulic cylinder. The characteristics of the parking brake were investigated by comparing the obtained experimental results and the theoretical design specifications.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.124-131
• /
• 2019

A design study of gas turbine engine simulation duct was conducted to investigate the operating characteristics and control gain tunning of the Altitude Engine Test Facility(AETF). The simulation duct design involved testing variable spike nozzle and ISO standard choking nozzle to verify the measurements such as mass flow rate and thrust. The simulation duct air flow area was designed to satisfy Ma 0.4 at the aerodynamic interface plane(AIP) at engine design condition. The test conditions for verifying the AETF controls and measurement devices were deduced from 1D analysis and CFD calculation results. The spike-cone driving part was designed to withstand the applied aero-load, and satisfy the axial traversing speed of 10 mm/s at whole operation envelops.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.32-35
• /
• 2005

밭고랑 옆의 해가림시설 지주목에 파이프라인을 설치하고 방제장치를 탑재한 주행장치가 자동으로 파이프를 추적하면서 농약을 살포 할 수 있는 방제기를 개발하여 인삼재배포장에서 성능시험을 실시하였다. 그 결과를 요약하면다음과 같다. 가. 인삼재배용 방제기의 주행장치는 동력원으로 축전지를 사용하는 DC모터에 의한 4륜 구동형으로 제작하였고, 방제장치는 수직 붐노즐 방식으로 쌍선형 노즐을 좌우에 3개씩 부착하고 살포각도를 조절할 수 있도록 제작하였으며, 인력으로 골간 이동시키는 방식이다 나. 성능시험결과 주행속도는 0.3m/s이고, 장애물이나 요철부의 통과 가능높이는 4cm였고, 작업성능은 38분/10a로 나타났다. 다. 방제성능은 피복면적비를 측정한 결과 인삼 잎 앞면은 100%, 뒷면은 40%이상으로 분무입자의 부착률이 양호한 것으로 나타났다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.294-301
• /
• 2016

This paper discusses about analyzing in-wheel vehicle's dynamic motion and load torque. Since in-wheel vehicle controls each left and right driving wheels, it is dangerous if vehicle's wheels are not in a cooperative control. First, this study builds the main wheel control logic using PID control theory and evaluates the stability. Using Carsim-Matlab/Simulink, vehicle dynamic motion is simulated in virtual 3D driving road. Through this, in-wheel vehicle's driving performance can be analyzed. The target vehicle is a rear-wheel drive in D-class sedan. Second, by using the first In-wheel vehicle's performance results, it derivate the drive motor's dynamic load torque for applying the dynamometer. Extracted load torque impute to dynamometer's load motor, linear experiment in dynamometer can replicated the 3-D road driving status. Also it, will be able to evaluate the more accurate performance analysis and stability, as a previous step of actual vehicle experiment.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.55-60
• /
• 2020

As research and development of eco-friendly vehicles are expanding worldwide, additional devices of vehicles are reduced or deleted to increase the mileage, or research is being conducted to reduce weight. Among them, the multi-stage transmission that was applied to the internal combustion engine vehicle was deleted and replaced with a reducer, and the initial driving power is secured by increasing the torque through the control of the motor output value. However, since frequent motor speed change can result in a load increase, this study attempts to develop a compact and lightweight manual two-stage reducer with a general reducer structure. Therefore, a two-speed transmission with two gear ratio was designed by inserting a large gear and a small gear in a structure with a parallel shaft to connect the gears with a V-belt in the form of a parallel shaft reducer, and setting the gear ratio of the low and high gears respectively. In addition, power performance according to the rotational speed and load of the transmission was checked through a test, and the heat generation characteristics generated during driving were checked to verify the validity of the transmission.