• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.231-231
• /
• 1999

PDP(Plasma Display Panel)는 21세기 디스플레이 시장을 대체할 차세대 디스플레이 장치로서 넓은 시야각, 얇고, 가볍고, 메모리기능이 있다는 여러 가지 장점들을 가지고 있지만 현재 고휘도, 고효율, 저소비전력 등의 문제점들을 해결하여야 한다. 이러한 문제점들의 해결을 위해서는 명확한 미세방전 PDP 플라즈마에 대한 정확한 진단 및 해석이 필요하다. 따라서 본 연구에서는 미세 면방전 AC-PDP 플라즈마의 기초 변수들 (플라즈마 밀도 & 온도, 플라즈마 뜬 전위, 플라즈마 전위 등의 측정을 통해 고휘도, 고효율 PDP를 위한 최적의 방전환경을 알아내는 데 있다. 일반적으로 전자의 밀도는 방전전류에 비례하는 관계를 보인다. 전류에 대해 방전전압이 일정하다면 전자밀도가 커짐에 따라서 휘도는 포화되며 상대적으로 휘도와 전류의 비로 표시되는 발광효율은 감소하게 된다. 반면 전자밀도가 상당히 작다면 휘도는 전자밀도에 비례하고 효율은 최대값을 보인다. 따라서 미세구조 PDP에서 휘도와 발광효율, 양쪽에 부합하는 최적의 방전환경을 플라즈마 전자밀도와 온도의 측정을 통해서 해석하는 것이 필요하다. 본 실험에서는 방전기체의 종류와 Ne+Xe 방전기체의 조성비에 따른 플라즈마 밀도, 온도의 공간적인 분포특성을 진단하기 위해서 초미세 랑뮈에 탐침(지름: 수 $mu extrm{m}$)을 제작하였다. 제작된 초미세 탐침을 컴퓨터로 제어되는 스텝핑모터를 장착한 정밀 X, Y, Z stage에 부착하여서 수 $\mu\textrm{m}$간격의 탐침 삽입위치에 따라서 미세면방전 AC-PDP의 플라즈마 밀도 및 온도분포 특성을 진단하였다. PDP 방전공간에 초미세 랑뮈에 탐침을 삽입해서 -200~+200V의 바이어스 전압을 가해준다. 음의 바이어스 전압구간에서 이온 포화전류를 얻어내어 여기서 플라즈마 이온 밀도를 측정하고 양의 바이어스 전압구간에서 플라즈마 전자온도를 측정하면 미세면방전 AC-PDP 플라즈마의 기초 진단이 가능하다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.106-110
• /
• 2004

The noise characteristics of the submarines and vessels are composed of tonal signals and background noises. Tonal signals are from the revolution of the motors or engines, and background noises are from the generation and disappearing of the bubbles around the vessels. We analyze the noises from maneuvering underwater vessels with ATW algorithm. We design broadband asymptotic noise generator using Hilbert transform and design the system which can generate asymptotic noise with sum of generated background noise and synthesized tonal signals. This system can be used as a cheating system from the torpedo shacks.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.142-151
• /
• 1993

An intelligent mulitiple monitoring system to monitor tool/machining states synthetically was proposed and developed. It consists of 2 fundamental subsystems : the multiple sensor detection unit and the intellignet integrated diagnosis unit. Three signals, that is, spindle motor current, Z-axis motor current, and machining sound were adopted to detect tool/machining states more reliably. Based on the multiple sensor information, the diagnosis unit judges either tool breakage or degree of tool wear state using fuzzy reasoning. Tool breakage is diagnosed by the level of spindle/z-axis motor current. Tool wear is diagnosed by both the result of fuzzy pattern recognition for motor currents and the result of pattern matching for machining sound. Fuzzy c-means algorithm was used for fuzzy pattern recognition. Experiments carried out for drill operation in the machining center have shown that the developed system monitors abnormal drill/states drilling very reliably.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.217-223
• /
• 2003

A novel cooling method induced by acoustic streaming generated by ultrasonic vibration at 30㎑ is presented. Ultrasonic vibration is obtained by piezoelectric devices and the maximum vibration amplitude of 50 m is achieved by including a horn, mechanical vibration amplifier in the system and making the complete system resonate. To investigate the enhancement of heat transfer capability of acoustic streaming, the temperature variations of heat source and air in the vicinity of heat source are measured in real-time. It is observed that acoustic streaming is instantly induced by ultrasonic vibration, resulting in the significant temperature drop due to the bulk air flow caused by acoustic streaming. In addition, it is observed that the cooling effect on the heat source is maximized when the gap between the ultrasonic vibrator and heat source coincides with the multiples of half-wavelength of the ultrasonic wave. This fact results from the resonance of the sound wave. The theoretical analysis of the dependence on the gap is also accomplished and verified by experiment. The advantage of the proposed cooling method by acoustic streaming is noise-free due to the ultrasonic vibration and maintenance-free because of the absence of moving parts. Moreover. This cooling method can be utilized to the nano and micro-electro mechanical systems, where the fan-based conventional cooling method can not be employed.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.175-183
• /
• 2022

With the expansion of the automobile market, the demand for Nd as an essential rare earth material for automobile motors is rapidly increasing. Research on the calcio-thermic reduction process between Nd₂O₃ and calcium-based alloys has been extensively studied in order to manufacture Nd. In this study, Ca-Cu, as a reducing for Nd₂O₃, was prepared by electrolysis in CaCl₂ molten salt. Cu wire and graphite were employed as a working electrode and a counter electrode for electrolysis reaction, respectively. The reference electrode was manufactured by putting Ag wire in a mixture of AgCl and CaCl₂ at a ratio of 1:99 mol%. The cyclic voltammetry results showed that the deposition of Ca²⁺ on the surface of working electrode was observed from a potential of -1.8 V, and the reduction potential of Ca²⁺ decreased as the reaction temperature increased. The diffusion coefficient of Ca²⁺ calculated by the chronoamperometry experiment was found to be 5.4(±6.8)×10^-6 cm²/s. In addition, Ca-Cu liquid alloy was prepared by applying a constant potential to Cu electrodes. The element ratio of Ca-Cu alloy formed by applying a potential of -2.0 V was found to Ca:Cu=1:4.