• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.617-624
• /
• 2021

The accurate estimation of the number of signals included in the received signal is required for the AOA(: Angle-of-Arrival) estimation, the interference suppression, the signal reception, etc. AIC(: Akaike Information Criterion) and MDL(: Minimum Description Length) algorithms, which are known as the typical algorithms to estimate the signal number, estimate the number of signals according to the minimum of each criterion. As the number of antenna elements increased, the estimation performance is enhanced, but the computational complexity is increased because values of criteria for entire antenna elements should be calculated for finding their minimum. In order to improve this problem, in this paper, we propose AIC and MDL algorithms based on the beamspace, which efficiently estimate the number of signals while reducing the computational complexity by reducing the dimension of an array antenna through the beamspace processing. In addition, we provide computer simulation results based on various scenarios for evaluating and analysing the estimation performance of the proposed algorithms.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.60-65
• /
• 2020

The monopulse tracking algorithm can estimate the location of a partner station based on an RF (Radio Frequency) signal. The location of the partner station is estimated based on the monopulse ratio curve (MR-C), which is calculated based on the sum and difference signal patterns of an antenna. Therefore, the range in which the estimated location can be calculated with high accuracy increases in proportion to the linear region of MR-C. In this paper, we proposed a method to extend the linear region of the MR-C curve using the beamforming technique for the tracking antenna system using the active phased array antenna. Simulation results based on the same antenna system, it was confirmed that the linear region of MR-C was enlarged by about twice as much as the general case where the proposed method was not applied.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.6
• /
• pp.445-451
• /
• 2021

Due to the recent spread and increasing damage of COVID-19, the most important measure to prevent infection is to find infected people early. Group testing which introduced half a century ago, can be used as a diagnostic method for COVID-19 and has become very efficient method. In this paper, we review the fundamental principles of existing group testing algorithms. In addition, the sparse signal reconstruction approach proposed by compressed sensing is improved and presented as a solution to group testing. Compressed sensing and group testing differ in computational methods, but are similar in that they find sparse signals. The our simulation results show the superiority of the proposed sparse signal reconstruction method. It is noteworthy that the proposed method shows performance improvement over other algorithms in the group testing schemes. It also shows performance improvement when finding a large number of defective samples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.755-762
• /
• 2022

This paper propose a clustered algorithm that possible more efficient COVID-19 disease learning prediction within clustering using context-aware attribute information. In typically, clustering of COVID-19 diseases provides to classify interrelationships within disease cluster information in the clustering process. The clustering data will be as a degrade factor if new or newly processing information during treated as contaminated factors in comparative interrelationships information. In this paper, we have shown the solving the problems and developed a clustering algorithm that can extracting disease correlation information in using K-means algorithm. According to their attributes from disease clusters using accumulated information and interrelationships clustering, the proposed algorithm analyzes the disease correlation clustering possible and centering points. The proposed algorithm showed improved adaptability to prediction accuracy of the classification management system in terms of learning as a group of multiple disease attribute information of COVID-19 through the applied simulation results.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.473-482
• /
• 2021

Although several Hangul generation models using deep learning have been introduced, they require a lot of data, have a complex structure, requires considerable time and resources, and often fail in style conversion. This paper proposes a model CKFont using the components of the initial, middle, and final components of Hangul as a way to compensate for these problems. The CKFont model is an end-to-end Hangul generation model based on GAN, and it can generate all Hangul in various styles with 28 characters and components of first, middle, and final components of Hangul characters. By acquiring local style information from components, the information is more accurate than global information acquisition, and the result of style conversion improves as it can reduce information loss. This is a model that uses the minimum number of characters among known models, and it is an efficient model that reduces style conversion failures, has a concise structure, and saves time and resources. The concept using components can be used for various image transformations and compositing as well as transformations of other languages.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.1-7
• /
• 2022

The study was conducted to determine the effectiveness of the triage training program utilizing pre-and post-training experiments designed for 119 emergency medical services teams. Objectives: This study evaluated the effectiveness of triage training programs on the accuracy of triage performed by 119 emergency medical services team staff who participated in the triage training program. Behavior: Participants in this study included 119 of the 166 EMS staff. In this program, a modified START triage consisting of a 20-minute theoretical presentation was presented to the participants. Data were analyzed using SPSS 21.0. Results: A significant increase in triage accuracy for 119 EMS teams(p<.001). And undertriage showed a significant decrease(p<.001). In addition, overtriage showed a decrease but was not statistically significant. Conclusions: The results obtained from this study showed that the triage training program was effective in improving the accuracy of the triage of multiple injury patients or disaster victims when presented to the 119 emergency medical services team. Therefore, these results suggest that it would be helpful to add triage training to the fire department's formal training program.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.65-65
• /
• 2023

최근 기후변화로 인해 홍수, 가뭄 등 수재해가 세계 곳곳에서 빈번하게 발생하고 있다. 이로 인해 정확한 강우-유출 해석의 중요도는 높아지고 있으며 강우-유출 해석에 따라 수자원 관리 및 계획수립의 정도가 달라질 수 있다. 본 연구 대상 지역인 메콩강 유역은 중국과 동남아시아 5개국(라오스, 태국, 미얀마, 베트남, 캄보디아)을 관통하는 국가공유하천으로 기초자료의 획득이 어렵고 국가별로 구축된 자료가 질적, 양적 품질이 상이하여 수문해석에서의 기초자료로 사용하기에 불확실성이 있다. 최근 기술의 발달로 글로벌 격자형 강수자료 획득이 용이함에 있어 미계측 대유역에서의 다양한 연구들이 수행되고 있지만, 지점강수자료와 시·공간적 오차로 인한 불확실성을 내포하고 있다. 이에 본 연구에서는 글로벌 격자형 강수자료의 적용성을 평가하기 위하여 지점 격자형 강수자료(APHRODITE)와 4개의 위성강수자료(CHIRPS, CMORPH, PERSIANN-CDR, TRMM)를 수집하고 합성곱 신경망 모형인 ConvAE 기법을 이용하여 위성강수자료의 시·공간 편의 보정을 수행하였다. 또한, 하천 수위에 대한 장기간 정보 수집이 가능한 메콩강 본류 4개 관측소(Luang Prabang, Pakse, Stung Treng, Kratie)를 선정하였으며 SWAT 모형을 이용하여 매개변수 보정(2004~2013)과 격자형 강수자료의 보정 전·후의 유출모의(2014~2015) 결과를 비교·분석하였다. 격자형 강우를 이용한 보정 및 유출 분석 결과 4개의 위성강수자료 모두 성능이 향상되었으며 그 중 보정된 TRMM이 가장 우수한 성능을 보여 해당 유역에서의 APHRODITE를 대체할 수 있다고 판단하였다. 따라서 본 연구에서 제시하는 ConvAE를 이용한 보정기법과 이를 이용한 강우-유출 해석은 향후 다양한 격자형 강수자료를 활용한 미계측 대유역에서의 수문해석에서 활용이 가능할 것으로 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.1
• /
• pp.39-48
• /
• 2023

Because a railway bridge is designed over a long period of time and covers a large site, it involves various environmental factors and uncertainties. For this reason, design changes often occur, even if the design was thoroughly reviewed in the initial design stage. In particular, design changes of large-scale facilities, such as railway bridges, consume significant time and cost, and it is extremely inefficient to repeat all the procedures each time. In this study, a technique that can improve the efficiency of learning after design change was developed by utilizing the learning result before design change through transfer learning among deep-learning algorithms. For analysis, scenarios were created, and a database was built using a previously developed railway bridge deep-learning-based prediction system. The proposed method results in similar accuracy when learning only 1000 data points in the new domain compared with the 8000 data points used for learning in the old domain before the design change. Moreover, it was confirmed that it has a faster convergence speed.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.65-73
• /
• 2023

In this paper, we propose a data augmentation method based on CNN(Convolutional Neural Network) learning for efficiently obtaining concrete crack image datasets. Real concrete crack images are not only difficult to obtain due to their unstructured shape and complex patterns, but also may be exposed to dangerous situations when acquiring data. In this paper, we solve the problem of collecting datasets exposed to such situations efficiently in terms of cost and time by using vector and thickness-based data augmentation techniques. To demonstrate the effectiveness of the proposed method, experiments were conducted in various scenes using U-Net-based crack detection, and the performance was improved in all scenes when measured by IoU accuracy. When the concrete crack data was not augmented, the percentage of incorrect predictions was about 25%, but when the data was augmented by our method, the percentage of incorrect predictions was reduced to 3%.

• Smart Media Journal
• /
• v.12 no.6
• /
• pp.35-40
• /
• 2023

In this study paper, we examine pre-trained language models used in Multi-Goal Conversational Recommender Systems (MG-CRS), comparing and analyzing their performances of various pre-trained language models. Specifically, we investigates the impact of the sizes of language models on the performance of MG-CRS. The study targets three types of language models - of BERT, GPT2, and BART, and measures and compares their accuracy in two tasks of 'type prediction' and 'topic prediction' on the MG-CRS dataset, DuRecDial 2.0. Experimental results show that all models demonstrated excellent performance in the type prediction task, but there were notable provide significant performance differences in performance depending on among the models or based on their sizes in the topic prediction task. Based on these findings, the study provides directions for improving the performance of MG-CRS.