• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.117-123
• /
• 2015

To remove heat generated during a burn-up test of nuclear fuels, the heat generation rate of nuclear fuels should be calculated accurately, and a coolant should be circulated in the test loop at an adequate flow rate. HANARO is an open pool-type reactor with an independent test loop for the burn-up test of nuclear fuels. A test rig is installed in the test loop, and a coolant is circulated through the test loop to maintain the temperature of the nuclear fuel rods within a desired temperature during an irradiation test. The components and sensors in the test rig can be broken or malfunction owing to the flow-induced vibration. In this study, a coolant flow simulation system was developed to verify and confirm the soundness of components and sensors assembled in the test rig with a high flow rate of the coolant.

• Radiation Oncology Journal
• /
• v.26 no.2
• /
• pp.118-125
• /
• 2008

Purpose: On-line image guided radiation therapy(on-line IGRT) and(kV X-ray images or cone beam CT images) were obtained by an on-board imager(OBI) and cone beam CT(CBCT), respectively. The images were then compared with simulated images to evaluate the patient's setup and correct for deviations. The setup deviations between the simulated images(kV or CBCT images), were computed from 2D/2D match or 3D/3D match programs, respectively. We then investigated the correctness of the calculated deviations. Materials and Methods: After the simulation and treatment planning for the RANDO phantom, the phantom was positioned on the treatment table. The phantom setup process was performed with side wall lasers which standardized treatment setup of the phantom with the simulated images, after the establishment of tolerance limits for laser line thickness. After a known translation or rotation angle was applied to the phantom, the kV X-ray images and CBCT images were obtained. Next, 2D/2D match and 3D/3D match with simulation CT images were taken. Lastly, the results were analyzed for accuracy of positional correction. Results: In the case of the 2D/2D match using kV X-ray and simulation images, a setup correction within $0.06^{\circ}$ for rotation only, 1.8 mm for translation only, and 2.1 mm and $0.3^{\circ}$ for both rotation and translation, respectively, was possible. As for the 3D/3D match using CBCT images, a correction within $0.03^{\circ}$ for rotation only, 0.16 mm for translation only, and 1.5 mm for translation and $0.0^{\circ}$ for rotation, respectively, was possible. Conclusion: The use of OBI or CBCT for the on-line IGRT provides the ability to exactly reproduce the simulated images in the setup of a patient in the treatment room. The fast detection and correction of a patient's positional error is possible in two dimensions via kV X-ray images from OBI and in three dimensions via CBCT with a higher accuracy. Consequently, the on-line IGRT represents a promising and reliable treatment procedure.

• The Journal of Korean Society for Radiation Therapy
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2000

• 대한방사선치료학회:학술대회논문집
• /
• 2000.06a
• /
• pp.30-30
• /
• 2000

• 기계와재료
• /
• v.11 no.2 s.40
• /
• pp.13-21
• /
• 1999

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.29.1-29
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.259-261
• /
• 2005

기존 계통 안정도 평가와 제어의 방법은 전체 계통의 데이터를 취득한 후 평가하고 제어하는 방식으로 이루어져왔다. 하지만 이 방식은 계산 효율 측면과 통신상의 문제로 인해 신뢰성 측면에서 문제가 있다 더욱이 긴급한 상황에서 전압 불안정을 판단하기에는 많은 문제점이 발생한다. 이러한 문제를 해결하기 위하여 PMU(Phase Measurement Unit)와 같은 측정 장치에서 제공하는 지역정보를 이용한 VIP(테브난 임피던스와 부하 임피던스의 비교 분석하여 제어하는 방법)가 제시되었다. 본 논문에서는 VIP 알고리즘을 이용한 전압 불안정 현상 모의를 실시간 Digital Simulator (Hypersim)를 이용하여 계통을 분석하였다. Hypersim에서는 실제 계통과 유사한 모의를 통해 동적 모의가 가능케 하고 있다. 이것은 동안 실효치 데이터를 기반으로 하는 시간 모의에서 벗어나 실제 계통과 같이 순시치 데이터를 가지고 실제 상황처럼 모의 분석할 수 있는 것이다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.102-106
• /
• 2014

In this paper, we investigate the realistic environment influence on the Hearing-Aid Compatibility(HAC) of the body-held device mock-up with a dual-band antenna. In detail, first, a dual-band internal antenna is designed considering the neighboring objects essential to a real attachable mobile device. This comes to reality by making its mock-up version. Second, the HAC of this device is simulated and measured for 'stand alone', and 'hand-held' cases. Particularly, the electromagnetic simulation of the designed antenna in the real device is verified by the standard measurement. Finally, the evaluated HAC is analyzed in terms of the relations with the bands, the mock-up environment and the hand effect.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.546-551
• /
• 2023

In this study, a beam steering measurement system was developed to perform functions such as far-field beam steering and near-field beam focusing for TX/RX modes in the near file of the AESA radar. The beam steering measurement system consists of a spherical near-field scanner, an antenna positioner, a near-field controller, a network analyzer, a radar control system, a verification radar, a simulated radio, and an AESA radar. Using the developed system, the characteristics of TX/RX patterns before and after installation of radome to AESA radar were measured, and the beam pattern was analyzed through conversion to far field-after near-field measurement.The boresight error of the radar antenna device was measured, and it was confirmed that the main lobes were formed the same before and after the simulated radar dome was mounted.

• Electrical & Electronic Materials
• /
• v.5 no.1
• /
• pp.89-98
• /
• 1992

가스절연개폐장치에서 단로기의 조작시에 발생하는 과도과전압의 측정은 최적절연설계, 신뢰성 향상, 고장탐지 등에 있어 대단히 중요하다. 본 논문은 과도과전압과 시변전계의 정확한 측정이 가능한 용량성 전계센서에 관한 것으로 측정이론, 설계, 교정기술과 실규모 GIS실험장치에서의 과도과전압의 측정에 관한 모의 실험에 대하여 기술하였다. 시제작된 센서의 변환특성은 응답매개변수에 의하여 지배되어지며 센서와 측정계의 주파수대역폭은 수 Hz~ 약 200MHz정도이었다. 실규모 GIS실험장치에 적용하여 과도과전압을 측정한 결과 센서의 우수한 응답특성이 확인되었다.