• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.89-97
• /
• 2007

This paper describes a load simulator with power recovery capability, which is based on the voltage source converter-inverter set. The load simulator can save the electric energy that should be consumed to test the operation and performance of the power quality compensator and the power equipment. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. the performance of proposed load simulator was analyzed with scaled-model experiment, interconnected with the active power filter. The experimental results confirms that the proposed load simulator can be utilized to test the performance of active power filter.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2023

This paper describes the system integration laboratory's requirement analysis, implementation, and verification for multiple-scenario unmanned aerial vehicle operation and control technology using a manned rotorcraft for Manned-Unmanned Teaming. System integration laboratory consists of manned rotorcraft flight simulation, unmanned aerial vehicle flight and mission equipment simulation, ground control system simulation for unmanned aerial vehicle control and change in the control authority between the ground control system and manned rotorcraft, and operation and control system for mission plan's writing and transmission. Each implemented simulation verified the requirements through software and hardware integration test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.255-262
• /
• 1996

고고도로 비행하는 위성발사체의 로켓모터는 압력이나 열적인 조건등이 지상과는 다른 저압환경에서 작동되기 때문에 그 성능이나 기능에 큰 영향을 받는다. 따라서 정확한 로켓의 추력과 자체의 신뢰성향상을 도모하기 위해서 로켓모터의 작동시험을 지상에서 저압환경을 모의하여 수행할 필요가 있다. 본 논문에서는 이러한 저압환경을 위한 시험장치의 종류 및 성능특성과 설계방법을 논하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.249-250
• /
• 2008

본 논문은 고창 전력품질 실증시험장에서 실 계통 연계를 위해 시험 중인 1.5M급 풍력발전 시뮬레이터의 선로정수를 PSCAD/EMTDC를 이용하여 모의하고 선로정수에 따른 풍력발전시스템이 계통에 미치는 영향을 분석하는데 중점을 두었다. 현재 고창에 설치되어있는 전력품질 실증시험장은 22.9kV 급전선에 SSTS(Synchronous Static Transfer Switch)의 한쪽 스위치로 직접 연결되어있으며 다른 한 쪽은 전력계통에서 발생되는 다양한 형태의 이벤트를 발생시키는 SSHG(Sag Swell Harmonics Generator)를 통하여 연결되어있다. 전력품질 향상기기중 하나인 DVR(Dynamic Voltage Restorer)는 SSTS의 부하쪽으로 직렬로 연결되어있으며 delta-wye 변압기를 통해 정류기 부하와 APF(Active Power Filter), 그리고 순저항부하와 유도성부하가 연결되어 있고 또한 SSHG를 통하여 연결된 배전선에는 DSTATCOM(Distribution Static Compensator)가 병렬로 연결되어있다. 본 논문에서는 고창에 있는 풍력발전 시뮬레이터와 동일하게 PSCAD/EMTDC로 구성하였으며 선로정수를 모델링 하기 위해 선로모델을 10Km, 20Km, 30Km, 40Km,로 설정하여 선로정수에 따른 계통영향을 분석하여 풍력발전 시뮬레이터에서 모의가능 한 선로정수 값을 제시한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2163-2170
• /
• 2012

A signal receiving system can measure and analyze frequency, pulse modulation, scan modulation, frequency modulation on pulse, phase modulation on pulse of RF signal. A signal receiving system should be verified under simulated RF signal environment prior to verification on operation in fields. This paper describes an effective method to generate simulated RF signals with considering operational scenario. The simulated RF signal generator can be effectively used to evaluate the performance of the signal receiver and reduce the test cost of the signal receiver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.61-66
• /
• 2004

The objective of the present study is to develop methodology for the assessment of combustion stability of liquid rocket injectors. To simulate actual combustion occurring inside of a thrust chamber, a fullscale injector has been employed in the study, which bums gaseous oxygen and mixture of methane and propane. The main idea of the experiment is that the mixing mechanism is considered as a dominant factor significantly affecting combustion instability in a fullscale thrust chamber. A single split triplet injector has been used with an open-end cylindrical combustion chamber. The characteristics revealed by excited dynamic pressures in gaseous combustion show degrees of relative acoustic damping depending on operating conditions. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.715-716
• /
• 2008

변압기 절연 열화의 주원인 중 하나인 운전 온도에 대한 특성을 파악하는 것은 매우 중요하다. 본 논문에서는 IEC 60076 및 ANSI C 57.12 중 온도 상승 관한 시험 규격을 고찰하여 각 규격별 변압기의 구분 및 온도 상승 한도의 규격치를 비교 기술하였고, 모의부하의 인가 방법 중 등가 부하인가 방법, 오일 온도 및 평균 권선 온도의 측정시험 방법 등에 대하여 논하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.45-46
• /
• 2006

변압기 내부의 수분은 절연물의 절연내력에 악영향을 끼치므로 수분측정은 변압기 사고예방과 수명연장에 매우 중요하다. 변압기 내의 수분함유량을 검출하는 시험법으로 Karl-Fischer법과 Dew-Point법을 사용해 왔다. 그러나 이 시험법은 기기를 분해해야 하고, 국부적인 부분에 대한 정보일 뿐 아니라 분석을 즉시 현장에서 하지 못하는 단점이 있다. 따라서 기존 시험법의 단점을 보완하기 위해 회복전압법(RVM, Return Voltage Method)이 제안되었다. 본 논문에서는 모의 셀 내부에 수분을 강제로 주입하여 수분함유량 변화를 주고 Karl-Fischer법을 통한 수분함유량 측정 결과와 RVM 특성 곡선을 비교 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1708-1713
• /
• 1997

In teleoperation of a manipulator, kinesthetic feedback can take an essential role in the sense that it provides an operator with more realistic information. In this paper, in order to implement the concept of kinesthetic feedback, force mapping algorithms based on screw theory have been presented. In the development of such algorithms, the virtual environment has been modeled usign a spring and dampers, and the forces caused by hitting the joint limits of a conrtolled manipulator were considered. Finally, some experimental results of force mapping algorithm have been presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.141-150
• /
• 2006

In this study we developed accelerated aging test cycle and equipment which can simulate domestic weather condition. And we proposed long term reliability assessment method for polymer housed distribution surge arresters. We carried out electrical and chemical analysis of the arresters which are used for accelerated aging test and outdoor exposure test. Through the analysis we verified the capability of the proposed method and we presented characteristic data for maintenance of domestic arresters.