• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.713-716
• /
• 2008

This paper presents an automatic back-light brightness control system for mobile displays. One of the most important factors in mobile display is the power consumption due to the limited and movable power source. More than 80% of power of the LCD display is consumed by LED bark-light unit (BLU). The target brightness also becomes higher because of its moving picture and high resolution image, so there are some side effects for not only excessive power consumption but also ergonomic inconvenience in dark environment. To prevent this discomfort and reduce power consumption, this paper proposes automatic brightness control (ABC) technique in mobile displays. Developed system contains TFT-LCD panel with built-in photo sensor, driver IC capable of controlling photo sensor, and BLU. Since the photo sensor array built in panel detects automatically outdoor ambient light intensity, the power of BLU in dark environment is reduced. Developed ABC system showed reduced power consumption of 50% in dark environment. We believe that the proposed system is very useful to control power of mobile TFT-LCD.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• The Optical Journal
• /
• s.99
• /
• pp.69-74
• /
• 2005

LCD를 극복할 수 있는 유일한 대안이 AM OLED라는 판단에 따라 일본업체들은 소형 AM OLED의 초기 생산체제에 돌입했다. 이에 비해 국내에서는 AM OLED 사업화의 필요성은 인정하고 있으나, 여전히 시장 지배력을 확보하고 있는 TFT LCD에 무게 중심을 두고 있어 AM OLED는 일본보다 사업화가 늦어질 것으로 보인다. 현재 세계 OLED 시장은 2006년에는 10억 달러, 2009년에는 20억 달러로 성장할 것으로 예상되는 등 2011년까지 연평균 30% 이상의 안정적인 성장세를 보일 것으로 전망된다. 이들 대부분은 중소형 모바일 제품에 탑재되는 것이다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.434-442
• /
• 2006

This paper proposes a color-matching 3D look-up table that simplifies the complex color-matching procedure between a monitor and a mobile display device, where the image colors are processed in a device-independent color space, such as CIEXYZ or CIELAB, and gamut mapping performed to compensate the gamut difference. The transform from a device-dependent RGB color space to a device-independent color space is implemented by performing display characterization. The mobile LCD characterization error using the S-curve model is larger than the tolerance error since the mobile LCD has the channel-chromaticity-inconstancy and channel-dependence characteristics. In this paper we reduced the characterization error using the electro-optical transfer functions of X, Y, and Z value for R, G, B, C, M, Y, K components. Experimental results demonstrated that 64 ($4{\times}4{\times}4$) was the smallest size of color-matching look-up table that could produce an image with an acceptable reproduction error, based on a comparison of color-matched images resulting from the proposed color-matching look-up table and complex step-by-step color-matching procedures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.33-41
• /
• 2004

This paper proposes a color matching 3D look-up table simplifying the complex color matching procedure between a monitor and a mobile display device. In other to perform color matching, it is necessary to process color of image in the device independent color space like CIEXYZ or CIELAB. To obtain the data of the device independent color space from that of the device dependent RGB color space, we must perform display characterizations. LCD characterization error using S-curve model is larger than tolerance error since LCD is more nonlinear than CRT. This paper improves the S-curve model to have smaller characterization error than tolerance error using the electro-optical transfer functions of X, Y, and Z value. We obtained images having higher color fidelity on mobile display devices through color matching experiments between monitor and mobile display devices. As a result of this experiments, we concluded that the color matching look-up table with 64(4${\times}$4${\times}$4) is the smallest size allowing characterization error to be acceptable.

• 전기의세계
• /
• v.53 no.9
• /
• pp.53-65
• /
• 2004

OLED는 LCD, PDP에 이어 평판디스플레이어의 3대 기술로 대두되고 있다. LCD는 산업 전반에 걸쳐 기술정립단계이어서 부분적인 신기술 개발, 초저가격제품 등 새로운 제품창출이 과제이다. PDP는 현재도 전력소비정감, 형광체 개선, 다면 탈취등의 공정 및 장비기술이 동시에 개선 및 개발이 이뤄져야할 부분이 남아있다.(중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.443-444
• /
• 2008

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.523-529
• /
• 2008

In this paper, we proposed mobile LCD module test device on embedded based, when operating the existing LCD, divide flicker clearly in full frame, and configuration so as to support between other CPU interface, MDDI, SPI, 24Bit RGB interface, etc. that is based on a high-speed CPU. In addition, when demand to test about each pixel of LCD, it is possible to change IP design of H/W, FPGA, but proposed system is application possible without other design changing. Proposed system is made smaller and equipped with battery, so secure with mobility for effective test the LCD/OLED module and it is able to test the pattern by the client program, for example exiting picture, mpeg, simple pattern test and test per pixel, scale, rotation, Odd/Even pixel per video, etc. From now on, if integrating with independent test system and it is configured that is able to mutual communication and test, it is expected to reduce consumption of human resources and improve productivity for LCD module test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.225-234
• /
• 2015

Most mobile devices such as smartphones and tablets have a soft keyboard implemented on the LCD touch screen to receive text inputs from the user. Because the size of the LCD screen is small, many efforts are going on to develop efficient soft keyboard with less key buttons. Especially, Hangul soft keyboard needs much time, effort, and deep software technology in developing an Hangul automata program module. This paper introduces design and implementation details of our authoring tool for Hangul soft keyboard running in Android. The tool supports the user to build an unique soft keyboard easily. The authoring tool downloads the soft keyboard app to the user's smartphone and makes it run immediately.