• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.2
• /
• pp.3-8
• /
• 2011

Recently, the demand for enterprise for service map providing and portal site services of a 3D virtual city model for public users has been expanding. Also, accuracy of the data, transfer rate and the update for the update for the lapse of time emerge are considered as more impertant factors, by providing 3D information with the web or mobile devices. With the latest technology, we have seen various 3D data through the web. With the VRML progressing actively, because it can provide a virtual display of the world and all aspects of interaction with web. It offers installation of simple plug-in without extra cost on the web. LiDAR system can obtain spatial data easily and accurately, as supprted by numerous researches and applications. However, in general, LiDAR data is obtained in the form of an irregular point cloud. So, in case of using data without converting, high processor is needed for presenting 2D forms from point data composed of 3D data and the data increase. This study expresses urban LiDAR data in 3D, 2D raster data that was applied by compressing algorithm that was used for solving the problems of large storage space and processing. For expressing 3D, algorithm that converts compressed LiDAR data into code Suited to VRML was made. Finally, urban area was expressed in 3D with expressing ground and feature separately.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.105-112
• /
• 2015

The recent announcement of the EPUB3.0 e-book standard with enhanced features is expected to bring about much development and change to the production and circulation of e-books. This study thus set out to implement an EPUB3.0-based e-book containing various layout screens and interactive functions to stimulate readers' interest and investigate the production method considering the simultaneous publication of paper book and e-book. As for methodology and content, the investigator completed an edition and layout design and added an interactive function to it with Adobe Indesign CC(2014) and saved it as an EPUB3.0 file. She then opened the save EPUB file in the Sigil program, checked its specific codes and errors, and made revisions for its completion. The completed EPUB3.0 file was put to the test by installing four EPUB viewers, which were capable of implementing the EPUB3.0 features well based on the fitness results of epubtest.org and uploading files, in desktop and mobile devices. The present study claims its significance by implementing an EPUB3.0-based e-book capable of fixed layout and interactive features, cutting down the time and costs to make an e-book considerably by linking and using a production program, and proposing the possibility of simultaneous publication of paper book and e-book.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.517-526
• /
• 2013

When developing an android mobile application the androids intent is used as a mechanism to send messages between local equipment of androids application inner part and other applications. But the androids intent does not support sending messages via each android products intent. If there is a way to support each androids equipments to send messages, it will be easier to make non-stopping services. Non-stopping service is used when the user is using the android to do word or searching services and suddenly changes to a different android product but still maintains the progress what was currently being done without waiting the programs to be loaded. It is possible to send messages to each android products by using the socket, but the connection must be maintained stably which is the weak point. In this paper, I am suggesting a BRIF(Broadcasting Remote Intent Framework) framework to send messages to different android products. BRIF is a framework that uses the Googles C2DM service which services asynchronous transmissions to different android products. This is organized with the C2DM server, RemoteContext Api, web server and RISP(Remote Intent Service Provider) which is will be easy to be used for the developers since there are no big changes for coding compared to the intent code.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11c
• /
• pp.1529-1532
• /
• 2003

최근 인터넷과 모바일 시스템이 급속히 발달함에 따라 이를 통하여 지리정보와 같은 공간데이터를 제공하는 서비스가 증가하였다. 이는 대용량 데이터에 대한 관리 및 빠른 처리와 급증하는 사용자에 대한 높은 동시처리량 및 높은 안정성을 요구하였고, 이를 해결하기 위하여 비공유 공간 데이터베이스 클러스터가 개발되었다. 비공유 공간 데이터베이스 클러스터는 고가용성을 위한 구조로서 문제가 발생할 경우 다른 백업노드가 대신하여 서비스를 지속시킨다. 그러나 기존의 비공유 공간 데이터베이스 클러스터는 클러스터 구성에 대한 회복을 위하여 로그를 계속 유지하므로 로그를 남기기 위해 보통의 질의처리 성능이 저하되었으며 로그 유지를 위한 비용이 증가하였다. 또한 노드단위의 로그를 갖기 때문에 클러스터 구성에 대한 회복이 직렬적으로 이루어져 고가용성을 위한 빠른 회복이 불가능 하였다. 따라서 본 논문에서는 비공유 공간 데이터베이스 클러스터에서 고가용성을 위한 병렬 회복 기법을 제안한다. 이를 위해 클러스터 구성에 대한 회복을 위한 클러스터 로그를 정의한다. 정의된 클러스터 로그는 마스터 테이블이 존재하는 노드에서 그룹내 다른 노드가 정지된 것을 감지할 때 남기기 시작한다. 정지된 노드는 자체회복을 마친 후 클러스터 구성에 대한 회복을 하는 단계에서 존재하는 복제본 테이블 각각에 대한 클러스터 로그를 병렬적으로 받아 회복을 한다. 따라서 정지된 노드가 발생할 경우에만 클러스터 로그를 남기므로 보통의 질의처리의 성능 저하가 없고 클러스터 로그 유지 비용이 적으며, 클러스터 구성에 대한 회복시 테이블단위의 병렬적인 회복으로 대용량 데이터인 공간데이터에 대해 빠르게 회복할 수 있어 가용성을 향상시킨다.들을 문법으로 작성하였으며, PGS를 통해 생성된 어휘 정보를 가지고 스캐너를 구성하였으며, 파싱테이블을 가지고 파서를 설계하였다. 파서의 출력으로 AST가 생성되면 번역기는 AST를 탐색하면서 의미적으로 동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.1
• /
• pp.203-229
• /
• 2018

This study examined current status and futurity of libraries based on the survey of librarians awareness in the era of the $4^{th}$ Industrial Revolution and sought to find effective response strategies for future changes. For this purpose, this study reviewed research issues against the $4^{th}$ Industrial Revolution based on preceding researches in our library area and other fields. The awareness survey was conducted of librarians of several types including national libraries and public libraries. The results are as follows: First, librarians were interested in the $4^{th}$ Industrial Revolution, but they thought that new technologies are poorly adopted in their libraries. Second, librarians were most frequently using Desktop PCs, mobile phones, RFID tags, and QR codes for library services. Third, librarians were required intelligent-information services because of their effectiveness, but their libraries did not provide them for users. Fourth, librarians expected that the $4^{th}$ Industrial Revolution brings positive influences to libraries' future. On the other hands, they also concerned about their job losses. Fifth, librarians agreed with necessity of new technologies of the $4^{th}$ Industrial Revolution and they especially wanted educations and training related with technologies. Also, technical supports for online services and simply repeated works are required.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.83-93
• /
• 2012

HTML5 has developed not to have browser dependancy considering interoperability as same as maintaining compatability with lower versions of HTML. HTML5, the newest web standardization is on going of being structured. Along with the smart phone boom, HTML5 is spotlighted because it can be applied to cross platforms in mobile web environments. Specially the local Storage that has been listed in new features in HTML5 supports offline function for web application that enables web application to be run even when the mobile is not connected to 3G or wifi. With Local storage, development of server-independent web application can be possible. However Local storage stores plaintext data in it without applying any security measure and this makes the plaintext data dangerous to security threats that are already exist in other client side storages like Cookie. In the paper we propose secure Local storage methods to offer a safe way to store and retrieve data in Local storage guaranteeing its performance. Suggested functions in this paper follow localStorage standard API and use a module that provide cryptographic function. We also prove the efficiency of suggested secure Local storage based on its performance evaluation with implementation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.