• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.168-173
• /
• 1997

시선의 추출을 통해 사용자의 관심 방향을 알고자하는 연구는 여러 분야에 응용될 수 있는데, 대표적인 것이 장애인의 컴퓨터 이용이나, 다중 윈도우에서 마우스의 기능 대용 및, VR에서의 위치 추적 장비의 대용 그리고 원격 회의 시스템에서의 view controlling등이다. 기존의 대부분의 연구들에서는 얼굴의 입력된 동영상으로부터 얼굴의 3차원 움직임량(rotation, translation)을 구하는데 중점을 두고 있으나 [1][2], 모니터, 카메라, 얼굴 좌표계간의 복잡한 변환 과정때문에 이를 바탕으로 사용자의 응시 위치를 파악하고자하는 연구는 거으 이루어지지 않고 있다. 본 논문에서는 일반 사무실 환경에서 입력된 얼굴 동영상으로부터 얼굴 영역 및 얼굴내의 눈, 코, 입 영역 등을 추출함으로써 모니터의 일정 영역을 응시하는 순간 변화된 특징점들의 위치 및 특징점들이 형성하는 기하학적 모양의 변화를 바탕으로 응시 위치를 계산하였다. 이때 앞의 세 좌표계간의 복잡한 변환 관계를 해결하기 위하여, 신경망 구조(다층 퍼셉트론)을 이용하였다. 신경망의 학습 과정을 위해서는 모니터 화면을 15영역(가로 5등분, 세로 3등분)으로 분할하여 각 영역의 중심점을 응시할 때 추출된 특징점들을 사용하였다. 이때 학습된 15개의 응시 위치이외에 또 다른 응시 영역에 대한 출력값을 얻기 위해, 출력 함수로 연속적이고 미분가능한 함수(linear output function)를 사용하였다. 실험 결과 신경망을 이용한 응시위치 파악 결과가 선형 보간법[3]을 사용한 결과보다 정확한 성능을 나타냈다.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.140-148
• /
• 2016

HEVC(High Efficient Video Coding) has twice times better compression ratio than H.264/AVC, but since the computational complexity has significantly increased in the encoder side, it may cause difficulty in real-time SW implementation in the encoder side. This paper proposes two methods about fast intra prediction. First, fast mode and prediction unit decision method using transform coefficients of the original block is proposed. and second, fast prediction unit decision method using coded block flag(cbf) is proposed. The proposed method achieves 42% encoder speed up with 0.8% bitrate increase compared with HM16.0.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.62-70
• /
• 2007

The aiming ability is a to improve accuracy performance of the firing vehicle. This paper describes the detection method of chatter vibration using disturbance acceleration in the pointing structure. In order to analysis vibration trends of the pointing system occurred during vehicle drive, acceleration data was processed by using data processing algorithm with moving average and Hilbert transform. Specific mode constants of acceleration were obtained under various disturbances. Vehicle velocity, road condition, property of pointing structure were considered as factors which make change of vibration trend in vehicle dynamics. Finally, back propagation neural networks have been applied to the pattern recognition for the classification of vibration signal in various driving conditions. Results of signal processing were compared and analysed.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.171-178
• /
• 1998

The added viscoelastic dampers increase damping and stiffness of buildings and results in so called non-classical or non-proportional damping problem. In this system the eigenvectors of the undamped system may not diagonalize the damping matrix, and the system is generally analyzed by converting the equation of motion into a 2n first order state-space form. As this approach is complex and time-consuming compared to the classically damped problem, the system is often analyzed by neglecting the off-diagonal terms in the damping matrix. In this paper the theoretical background of the approximate approach is studied, and the vibration characteristics of a three-story shear building with a viscoelastic damper are investigated using the exact and approximate method. It is found that the approximate method may produce good result when the additional damping is small, but as the damping increases the error also increase.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.317-324
• /
• 2004

Electromagnetically coupled coaxial dipole (ECCD) array antenna with and without short-ended termination is investigated theoretically. The integral equations are derived for the structure by use of the Fourier transform and mode expansion of radial waveguide. The integrals appearing in the integral equations are evaluated along the branch cut instead of real axis for a faster convergent integral. The effects of slots and dipoles, short-ended termination length, and dielectric coating on the radiation characteristics are presented. Radiation pattern of the structure is also investigated. The results of the present method are compared with those of the commercial EM simulator and good agreement is found.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.51-57
• /
• 2002

In this paper, a simple interpolation technique in a frequency domain is proposed for the discrete Fourier transform(DFT) algorithm. Frequency and phase resolution capabilities of the DFT algorithm can be significantly improved by the proposed interpolation technique without increase of a DFT size(the number of points for the DFT). The new technique uses a diving point in amplitude and phase spectrums. As an application, the technique can be used for joint estimation of fine frequency and phase offsets in burst mode digital transmission. Simulation results show that the joint estimator using the technique is robust to estimation errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1971-1976
• /
• 1998

This paper is a study on the improved version of the conventional format converter. This paper paper descries three interface systems used to record and play back the compressed digital data from the Grand Alliance(GA) HDTV system. The first interface is for recording the compressed data from the GA-HDTV to the HDVCR system, the second is for the GA-HDTV to the D3 VTR and the third is for the HDVCR to D3 VTR. This interface is also designed to accept both 8 VSB and 16 VSB modes. It is expected that this paper to be valuable in bringing the compressed HDTV recoding technology into television studios, cable head ends and consumer homes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.476-482
• /
• 2006

In this paper, a multimode feed horn antenna is suggested for a high power microwave(HPM) antenna system. The proposed HPM feed horn antenna which is connected with a mode converter is located between source and reflector antenna. A multimode feed horn antenna which has reduced -25 dB beamwidth is designed and fabricated for miniaturization of reflector antenna because -25 dB beamwidth which is determined by considering spillover of feed horn antenna decides a size of reflector in case of HPM. As a result, feed system which uses the multimode feed horn antenna has high gain about 27 dBi and return loss is less than -22 dB at 10 GHz. The measured -25 dB beamwidths of the radiation pattern at vertical, horizontal-plane equal to $20.24^{\circ},\;28.92^{\circ}$ which is less than about $10^{\circ}$ beamwidth of conventional feed system. Thus the suggested feed hem antenna is suitable to feed horn for miniaturization of HPM antenna system.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.271-278
• /
• 2000

We have fabricated and analyzed the lasing characteristics of 1.3$\mu\textrm{m}$ Spot-Size-Converter (SSC) integrated Fabry-Perot (FP) laser diodes, which are very promising light sources for optical subscriber networks. SSC-LDs has been developed by BIB (buttjoint-built-in) coupling and selective MOVPE growth. High-performances were achieved such as the slope efficiency from the SSC facet of 0.23-0.32 mW/mA, the full-width at the half maximum of the far-field pattern (FFP) of 9.5$^{\circ}$~12.3$^{\circ}$, the alignment tolerances of $\pm$2.3$\mu\textrm{m}$ and $\pm$2.5$\mu\textrm{m}$ within the extra-coupling loss of 1 dB for the vertical and parallel directions, respectively. These experimental results were compared to theoretical ones in order to clarify the operational problems and give a good design direction of the fabricated SSC-LDs. It was revealed that an asymmetric output power from the facets, an irrelevancy of FFP and the waveguide structure around SSC facet region, and a poor temperature characteristics were originated from the scattering in the BIB and SSC sections and SHB effect in the active section for the first time.t time.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1035-1052
• /
• 2019

Recently, as the demand for immersive videos increases, efficient video processing techniques for omnidirectional immersive video is actively developed by MPEG-I. While the omnidirectional video provides a larger degree of freedom for a free viewpoint, the size of the video increases significantly. Furthermore, in order to compress 6 degree-of-freedom (6 DoF) videos that support motion parallax, it is required to develop a codec to yield better coding efficiency. In this paper, we develop a 6 DoF codec using Versatile Video Coding (VVC) as the next generation video coding standard. To the authors' best knowledge, this is the first VVC-based 6 DoF video codec toward the future ISO/IEC 23090 Part 7 (Metadata for Immersive Media (Video)) MPEG-I standardization. The experiments were conducted on the seven test video sequences specified in Common Test Condition (CTC) in two operation modes of TMIV (Test Model for Immersive Media) software. It is demonstrated that the proposed codec improves coding performance around 33.8% BD-rate reduction in the MIV (Metadata for Immersive Video) mode and 30.2% BD-rate reduction in the MIV view mode as compared to the state-of-the-art TMIV reference software. We also show the performance comparisons using Immersive Video PSNR (IV-PSNR) and Mean Structural Similarity (MSSIM).