• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.297-299
• /
• 2016

In this paper, Power Generator modeling for LNG ship has been performed and monitoring system has been developed in MATLAB/SIMULINK. The principal component of Power Generator are engine part(Diesel Engine, Turbine Engine) which provides the mechanical power and synchronous generator which convert the mechanical power into electrical power. Also, load sharing between paralleled generators has been performed to share a total load that exceeds the capacity of a single generator and designated ship lumped load simulations have been carried out. A validity of these systems has been verified by comparison between simulation results and estimated result from the designated lumped load.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.201-206
• /
• 2006

Earth sciences is undergoing a gradual but massive shift from description of the earth and earth systems, toward process modeling, simulation, and process visualization. This shift is very challenging because the underlying physical and chemical processes are often nonlinear and coupled. In addition, we are especially challenged when the processes take place in strongly heterogeneous systems. An example is two-phase fluid flow in rocks, which is a nonlinear, coupled and time-dependent problem and occurs in complex porous media. To understand and simulate these complex processes, the knowledge of underlying pore-scale processes is essential. This paper presents a new attempt to use pore-scale simulations for understanding physical properties of rocks. A rigorous pore-scale simulator requires three important traits: reliability, efficiency, and ability to handle complex microstructures. We use the Lattice-Boltzmann (LB) method for singleand two-phase flow properties, finite-element methods (FEM) for elastic and electrical properties of rocks. These rigorous pore-scale simulators can significantly complement the physical laboratory, with several distinct advantages: (1) rigorous prediction of the physical properties, (2) interrelations among the different rock properties in a given pore geometry, and (3) simulation of dynamic problems, which describe coupled, nonlinear, transient and complex behavior of Earth systems.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.38-42
• /
• 1998

본 논문에서는 DEVS 형식론과 High Level Architecture에 기반을 둔 이 기종 시뮬레이션 환경의 구축에 대해 기술한다. DEVS 형식론은 여러 가지 방법으로 기술된 모델들을 동일한 형식론으로 간주하기 위해 사용되었다. 즉, 이산사건 모델링을 위한 세가지 세계관(world view)으로 기술된 시뮬레이션 모델들을 DEVS 형식론으로의 변환을 통해 전체적으로는 DEVS 형식론만을 사용한 것과 동일한 형태로 표현되도록 하였다. High Level Architecture는 시뮬레이션 수행시의 상호 연동성을 보장하기 위해 사용되었다. 이때, DEVS 형식론과 High Level Architecture에서의 시뮬레이션 시간 진행 방법이 다르기 때문에 이의 해결을 Synchronizer, EOS 방법을 제안하였다.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.566-572
• /
• 2017

As NAND flash storage is being widely used, its simulation methodologies have been studied in various aspects such as performance, reliability, and endurance. As a result, there have been advances in NAND flash storage simulation for both functional modeling and timing modeling. However, in addition to these advances, there is a need to drastically reduce the long simulation time that is required to evaluate the aging effect on flash storage. This paper proposes a so-called multi-core scalable real-time flash storage simulation method, which can control the simulation speed according to the user's preference. According to this method, it is possible to speed up the simulation in proportion to the number of CPU cores arbitrarily given while guaranteeing the correctness of the simulation result. Using our simulator implemented in the form of the Linux kernel module, we demonstrate the multi-core scalability and correctness of the proposed method.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.1 s.29
• /
• pp.80-88
• /
• 2006

Construction graphical simulations usually do not reflect physical properties of construction equipment and material because there are restricted to the geometric model. The complete description of construction operations is difficult for graphical simulation without a physical modeling. The object of this research is to enhance the functionality of restricted simulation system to geometric model. And research is conducted to overcome the limitation of current construction graphical simulation system through the connection geometric model and physical model with the physical properties of construction equipment and material such as crane's cable oscillation. The motion equations for the oscillation of crane cable as a result of the trolley's movement and the boom's rotation were derived. The equations were solved through numerical analysis and the results were simulated visually. The realistic description with physical modeling of construction operations will contribute for ensuring preliminary against risks and improving constructability as well as the application of various fields.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.19-29
• /
• 2017

System Entity Structure/Model Base (SES/MB) enhances organizing model families and storing and reusing model components in the multifaceted system modeling. However, the real world can be described not only an individual system but also a collection of those systems, which is called system of systems (SoS). Because SES/MB has a limitation to simulate the SoS using HLA/RTI, an extended framework is required to simulate it. Therefore, this paper proposes System of Systems Entity Structure/Federate Base (SoSES/FB) for simulation in a distributed environment (HLA/RTI). The proposed method provides the library of federates (FB) and System of System Entity Structure (SoSES) formalism, which represents structural knowledge of a collection of simulators. It also provides a methodology for the development process of distributed simulation. The paper introduces the anti-missile defense simulation using the proposed SoSES/FB.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.27-35
• /
• 2010

War-games using C4I systems have been used to improve the command ability of commanders and the fighting power of combat forces. During a war-game simulation, a commander makes a plan for the movement of a combat force and issues orders to the combat force according to the plan. If it is possible to minimize damages from the artillery of enemy forces and take the advantage position where is effective for attack/defense, we can hold a dominant position of the battlefield. Therefore, this papers proposes a genetic algorithm-based optimal path searching method. The proposed method creates an optimal path of a combat force by taking into consideration dangerous conditions of the battlefield in which the combat force is. This paper also shows the process of creating an optimal path by using a discrete event specification modeling and simulation method.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.1
• /
• pp.867-874
• /
• 2018

This study aims to develop a sort of expert system to simulate Internet of Things (IoT) service in architectural design alternatives and enhance the simulation performance using building information. The proposed protype system, named iotBIM, visualizes human behaviors and IoT services in a virtual place that is automatically generated from among design alternatives. We use commercial building information modeling (BIM) authoring tool for the development of iotBIM. The decision to develop iotBIM on the BIM platform was made because BIM tools already generate precise 3D models of design alternatives; iotBIM is plugged into the BIM tool as a simulation module. In the midst of the design process, architectural designers can activate iotBIM to investigate and establish IoT services that accord visually with design alternatives. The purpose of this study is to provide a theoretical and technological basis for the ultimate goal of this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.372-372
• /
• 2022

스마트시티 하천관리를 위해 선행된 연구에서는 도시하천관련 데이터를 수집-정제-제공하는 도시하천 통합데이터 플랫폼을 개발하였다. 이에 하천 분석을 위한 유역 유출, 하천 흐름 그리고 도시유출 등의 모듈과 하천 환경, 친수, 종합 평가 모델을 연계하여 도시하천관리 연계플랫폼으로 연구개발을 진행하였다. 본 연구에서는 스마트시티 하천관리를 위한 시나리오 기반 제방 파제 시뮬레이션 분석 결과 가시화 모듈에 관한 연구를 진행한다. 부산 EDC 지역을 대상으로 DEM, 항공영상, 위성영상, 하천 지리 정보, 하천 단면도 등의 데이터를 결합하여 하천 및 유역 전산 3D 형상 모델링을 진행한다. 또한 하천 내부 유량 및 파제 제체 모델링, 유동장 격자 모델링을 통해 제방 붕괴 범람 시뮬레이션 대상 지역을 구현한다. 해당 EDC 지역 구현 모델에 연속방정식, 운동량방정식, 수송방정식 등 지배방정식과 삼상 유동 기법 등 수치 해석 기법을 활용하여 제방 파제 시뮬레이션을 수행한다. 시뮬레이션의 침수범위 및 침수심 분포 결과는 위경도를 포함한 ASCII Grid로 반환되며 GeoServer를 통한 좌표계 설정 및 도시하천 연계플랫폼에서 가시화하는 연구를 진행하였다. 제방 파제 시나리오는 제방 높이 2m, 제방 폭 7.5m, 파제 길이 20m로 설정하여 4개의 붕괴 위치를 지정하였고, 지정된 위치에 대한 제방 파제 3D 시뮬레이션을 통해 도출된 Case 별 2D/3D 영상과 침수심 공간 분포에 대한 Raster Graphics를 전처리하여 시나리오별 침수범위-침수심을 도시하천 연계플랫폼 상에서 가시화하는 연구를 진행하였다. 도시하천 연계플랫폼의 시나리오 기반 제방 파제 시뮬레이션 모듈을 통하여 스마트시티의 제방 파제 피해 양상 및 대책 마련 의사결정 보조로 활용할 수 있을 것으로 기대된다.