• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.96-97
• /
• 2021

In the 4th Industrial Revolution and changes in the construction industry market, the importance of information management is becoming more emphasized. For efficient use of information, construction data must be collected, processed and analyzed more quickly and accurately, depending on the purpose of the project. Thus, data could be utilized as integrated knowledge. However, there is a limit to searching or managing construction information produced in various formats over the entire life cycle by index words. Therefore, this study proposes a construction information integrated management plan that reflects the characteristics of the construction industry by applying the OWL concept. For this, as an initial study, an architectural object of small size and clear features was needed. Therefore, a construction information management study using OWL was conducted for Korean traditional architectural style houses (Hanok) which has these characteristics.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.274-275
• /
• 2020

본 논문에서는 모듈형으로 제작된 DC 용접전원과 AC용접 전원을 제안한다. DC 용접전원 모듈은 기재만 된 바 있으며 추가적으로 100kHz의 높은 스위칭주파수와 30kW 변압기의 분산설계로 전력밀도를 높였고, 변압기의 병렬에 의해 발생한 누설 인덕턴스의 차이는 CMCI (Common Mode Coupled Inductor)에 의해 개선되었다. 기존 AC 용접전원에서 출력단 스위치의 교번으로 인해 발생하는 서지성 에너지는 일반적으로 스너버를 이용하여 에너지의 최대값을 제안하다. 제안하는 AC 용접전원 모듈은 출력단 스위치의 교번으로 발생하는 서지 에너지를 캐패시터 뱅크로 완화하고, 완화된 서지 에너지를 환원하여 효율 개선을 목표로 한다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.112-114
• /
• 2020

기존 위상천이 풀브리지 컨버터는 입력전압 범위가 넓을 경우, 제어변수인 듀티의 변동이 크게 되어 큰 순환전류가 존재하고, 2차측 정류단 전압스트레스가 커지는 문제가 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 위상천이 방식을 적용한 3-레그 인버터 타입의 절연형 컨버터를 제안한다. 제안회로는 턴 비의 변화로 입력전압에 상관없이 항상 최대 듀티로 동작하며, 1차측 전류 및 2차측 정류단 전압스트레스를 감소시킬 수 있다. 제안 회로의 타당성을 검증하기 위해, 입력 311V_DC/622V_DC, 출력 50V 6kW급 사양의 프로토타입 컨버터를 설계·제작하였고, 그 실험 결과를 발표한다.

• Korean Journal of Hazardous Materials
• /
• v.3 no.1
• /
• pp.52-58
• /
• 2015

Since the HF release in 2012 in Korea, it became one of the most significant to evaluate consequence to the vicinity of industry facilities handling hazardous materials. BTX plant is selected to assess off-site risk to check whether the facility satisfies the Chemical Control Law by Korea Government. Accident scenarios were listed using process safety information. The scenarios having effect to the off-site were selected and assessed further according to guideline provided by Korea government. Worst case and alternative scenarios including other interested scenarios were evaluated using ALOHA. Each evaluated scenario was assessed further considering countermeasures. The results showed that the facility handling chloric acid is safe enough and needed no further protections at the moment.

• Water for future
• /
• v.55 no.2
• /
• pp.38-44
• /
• 2022

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.71-71
• /
• 2015

표면영상유속계(Surface Image Velocimety, SIV)는 하천 표면의 영상을 분석하여 유속을 산정하는 매우 실용적이며 간편한 유속측정 방법이다. 그러나 표면영상유속계는 수표면의 움직임을 계산하여 표면유속을 산정하기 때문에 빛이 없는 야간의 경우 수표면의 움직임을 촬영하기 어려워 밤에 발생하는 홍수 유량 측정이 어려운 단점이 있다. 이를 해결하기 위해 수표면에 야광 입자를 흘려 촬영하는 방법이 있었으나 대하천의 경우 야광물질의 크기가 작아 영상 내에서 식별이 어려운 문제가 있었고, 높은 밝기의 조명을 사용하여 영상을 획득하는 방법 또한 수행되었으나 빛이 수표면에 반사되어 하천 전체를 촬영하기 어려운 문제점이 있었다. 이 후 근적외선 카메라를 이용하여 야간 측정의 어려움을 극복하고자 하였으나 촬영범위가 최대 50 m 정도로 조사 거리의 한계를 나타내었다. 최근 Fujita(2013)는 원적외선카메라를 이용한 하천 유량 측정을 실시하였는데 이는 기존 야간촬영 시 시도되었던 방법의 문제점을 해결할 수 있음을 보여주었다. 이에 본 연구에서는 원적외선 카메라를 이용한 표면영상유속계의 적용성을 검토하고자 실험수로에서 실험을 수행하였다. 실험 시 주간 및 야간의 상황을 설정하여 원적외선 카메라, 근적외선 카메라 그리고 일반 캠코더를 이용하여 흐름을 촬영하였다. 또한 프로펠러유속계를 이용하여 흐름의 표면유속을 측정하였다. 원적외선 카메라를 이용하여 촬영된 영상을 상호상관법을 이용하여 표면유속을 측정하였고, 이를 프로펠러유속계 측정결과와 비교하여 정확도를 검토하였다. 또한 일반 캠코더와 근적외선카메라의 영상 분석 결과와도 비교하여 개선점을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.213-216
• /
• 2004

이 논문은 클라이언트/서버 환경에서 클라이언트의 상호 운용성을 위한 브리지 프레임 워크인 Flex Bridge Framework(FBF)를 정의하는데 있다. 설명하게 될 주요 내용은 1) FBF의 아키텍처를 설명하고 2) FBF의 프로토콜을 설명한다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.228-228
• /
• 2020

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.99-107
• /
• 2018

This research has developed a high temperature steam cleaning technology using a ceramic membrane with durability against temperature and pressure conditions. In steam cleaning, steam of $120^{\circ}C$ is injected into the ceramic membrane to induce pyrolysis by the endothermic reaction to remove fouling from the membrane. The water quality of raw water was adjusted to turbidity 10, 25 NTU and DOC 2.5 mg/L, and the membrane was uniformly fouled by constant pressure operation at 100, 200, and 300 kPa. Physical backwashing was performed with water and air at a pressure of 500 kPa and steam at $120^{\circ}C$ was injected for 0 to 5 minutes. As the turbidity concentration and the operating pressure increased, the flux decreased by 0.7 to 14.4%. It is confirmed that 10.7 to 53.8% recovery is possible than physical cleaning at the injection of steam for 3 minutes, so it is considered that the steam cleaning of the ceramic membrane is effective. Compared with CEB after NaOCl (300 mg/L) filtration at 25 NTU and 300 kPa of turbidity, the steam cleaning result for 3 minutes was similar to 46.7% of CEB for 3 hours. It has been confirmed that steam cleaning is suitable for a ceramic membrane having excellent heat resistance against high temperature. It was considered to have better cleaning efficiency as compared with general physical backwashing.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.61-72
• /
• 2018

In this study, applicability of the decentralized water supply system were investigated by the high flux evaluation using ceramic membrane with combined pretreatment process. A) filtration process increased the transmembrane pressure of 1.4 kPa and 89.5 kPa on 2 and $5m^3/m^2{\cdot}d$ of filtration flux, respectively, the physical backwashing recovery rate were less than 28.6%. The (B) Coag./Floc. - Sedi. combined process with 4 mg / L of A-PAC showed that the transmembrane pressure increased to within 6 kPa, the physical backwashing recovery rate was over 37.9 % higher than (A) Filtration process. (C) Coag./Floc. combined process showed an increase of transmembrane pressure compared with (B) Coag./Floc. - Sedi. combined process, physical backwashing recovery rate was over 84%. As a result of the membrane fouling analysis using the resistance in series model, the combined pretreatment process showed that the cake resistance (Rc) was more than 92% at membrane filtration flux of $2m^3/m^2{\cdot}d$. In the (C) Coag./Floc. combined process, cake resistance(Rc) was over 86% on high flux conditions. The coagulation floc contained in influent was removed by the membrane, and the cake layer formed with the removed floc was identified as reversible fouling resistance which could be recovered by physical backwashing. The decentralized water supply system, which has the limitation of site area and installation space, is considered to could be operation of high flux of ceramic membrane by applying (C) Coag./Floc. combined process without sedimentation process.