• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.217.1-217.1
• /
• 2012

현존하는 저궤도위성의 S-Band 관제채널은 대부분 RH 또는 LH 편파를 사용한다. 그러나 다목적실용위성 3호와 같이 RH와 LH 편파를 동시에 사용하는 위성의 경우 위성추적을 위해 사용되어지는 지상안테나는 RH와 LH 편파를 동시에 수신하여야할 뿐만 아니라 편파변경시점에 따라 송신출력의 편파가 변경되어야하기 때문에 지상에서 위성으로 명령을 전송할 수 있는 송신가능시간(Command Window)에 영향을 미친다. 이러한 저궤도위성의 RH와 LH 편파의 신호세기는 위성체의 자세 및 운영방법에 따라 결정되어지기 때문에 다양한 형태의 편파수신경향성을 나타낸다. 따라서 이러한 영향을 최소화하기 위하여 지상안테나는 RH 및 LH 편파에 대하여 자동추적기능을 수행하여 위성을 추적하게 된다. 지상안테나의 자동추적기능은 수신되는 신호세기를 순간적으로 비교하여 가장 큰 세기의 신호가 수신될 수 있도록 제어하는 기술로서 수신신호의 형태에 따라 영향을 받으며 이 때 발생하는 오차는 위성추적에 지대한 영향을 미친다. 또한 편파가 변경되는 시점에서는 자동추적오차가 증가하게 되는 경향을 나타나게 된다. 따라서 본 논문에서는 다양한 형태로 동시 수신되는 RH 및 LH 편파의 자동추적오차를 분석하여 송신가능시간(Command Window) 및 수신신호에 어느 정도 영향을 미치는지에 대하여 분석하였으며 본 영향을 최소화할 수 있는 방법에 대하여 기술하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1078-1081
• /
• 2004

A robot manipulator is usually operated in two modes: free motion and constraint motion depending on whether the robot comes into contact with the environment or not. At the moment of contact, impact occurs, and sometimes, it possibly degrade the robot's performance by vibration and at worst, shortens its lifetime. In this article, a new proposed algorithm is described by introducing a command signal modification method on the basis of impedance control and a validity of the proposed algorithm is demonstrated by showing a simulation and an experiment.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2147-2149
• /
• 2001

국내 한 증기터빈 발전소의 출력증감발 운전을 중앙급전 명령에 의해 가능하도록 하는 제어로직을 구현하였다. 이는 중앙급전으로부터 증감발 펄스 신호를 입력받아 발전기 출력 설정치를 변경함으로써 이루어지고, 증감되는 양은 펄스의 지속시간에 의해 이루어지며 여러 가지 운전상황에 대해 원활한 운전전환이 이루어져야 한다. 본 논문에서는 이를 구현하기 위해 제어로직 및 운전원 조작 화면의 구성을 소개하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.83-90
• /
• 2006

A robot manipulator is usually operated in two modes: free and constrained motion modes, depending on whether the robot is in contact with an environment or not. At the moment of contact, an impact occurs and can exert harmful effects to the robot or the object. In case of teleoperation, since a user may give an inadequately excessive velocity command to the slave due to insufficient visual information, the robot nay collide the object with an excessive speed and it possibly deteriorates the robot's performance causing vibrations and at worst, shortens its lifetime by its fracture. In this article, a new algorithm is proposed by introducing a command signal modification method on the basis of impedance control and validity of the proposed algorithm is demonstrated by performing simulations and experiments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.176-181
• /
• 2016

In this paper, the autonomous mobile robot control system for detecting fire was proposed using the wearable device based on EMG(Electromyogram) signal. Myo armband is used for detecting the user's EMG signal. The gesture was classified after sending the data of EMG signal to a computer using Bluetooth communication. Then the robot named 'uBrain' was implemented to move by received data from Bluetooth communication in our experiment. 'Move front', 'Turn right', 'Turn left', and 'Stop' are controllable commands for the robot. And if the robot cannot receive the Bluetooth signal from a user or if a user wants to change manual mode to autonomous mode, the robot was implemented to be in the autonomous mode. The robot flashes the LED when IR sensor detects the fire during moving.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.754-765
• /
• 2020

Currently, Intelligent femoral prostheses that support the corresponding mode in walking and specific movements are being studied. Certain controls such as upstairs, sitting, and standing require a technique to classify control commands based on the user's intention because the mode must be changed before the operation. Therefore, in this paper, we propose a technique that can classify various control commands based on the user's intention in the intelligent thigh prosthesis system. If it is determined that the EMG signal needs to be compensated, the proposed technique compensates the EMG signal using the correlation between the strength and frequency components of the normal EMG signal and the muscle volume estimated by the pressure sensor. Through the experiment, it was confirmed that the user's intention was accurately detected even in the situation where muscle fatigue was accumulated. Improved intention detection techniques allow five control modes to be distinguished based on the number of muscle contractions within a given period of time. The results of the experiment confirmed that 97.5% accuracy was achieved through muscle tone compensation even if the strength of the muscle signal was different from normal due to muscle fatigue after exercise.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.929-933
• /
• 2004

A robot manipulator is usually operated in two modes: free motion and constraint motion according to the fact whether the robot comes into contact with the environment or not. At the moment of contact, impact occurs, and sometimes, it can possibly degrade the robot's performance such as vibration and at worst, shortens its lifetime. In this article, a new proposed algorithm is described by introducing a command signal modification method on the basis of impedance control and a validity of the proposed algorithm is demonstrated by showing the simulation study.