• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.379-388
• /
• 2001

Existing microplane models for concrete use three-dimensional spherical microplanes in the analysis of two-dimensional planar members as well as three-dimensional members. Also, they do not accurately describe the post-cracking behavior of reinforced concrete in tension-compression. In this study, a new microplane model is developed to overcome the disadvantages of the existing models. Instead of the spherical microplanes, the proposed microplane model uses disk microplanes involving a less number of microplanes and two-dimensional stresses and strains. As the result, the proposed model is more effective in numerical calculations. Also, the concept of the strain boundary is introduced to describe accurately the compressive behavior of reinforced concrete with tensile cracks in tension-compression. The validity of the proposed model is verified by comparison with existing experiments. In this paper, the microplane model and the numerical techniques involved in the finite element analysis are described in detail.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.91-97
• /
• 2014

An experimental program was initiated to investigate the structural capacity of PC (Precast Concrete) beam-column joints used for the underground parking structure. Static testing of 4 typical PC beam-column joints specimens was conducted. Specimens were designed to span a range of parameters typically encountered for such members, based on findings from the survey of existing PC joint details used in the construction fields in Korea. The specimens were four by their joint types and testing parameters. The specific structural behavior germane to each specimen, and general observations on overall member behavior as a function of the considered parameters, are reported. From the results of tests on four PC joints specimens, the beam-column joints of PC structure used for the underground parking building was found to have similar structural capacities when comparing to the cast-in-place concrete system.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.247-249
• /
• 2005

UTM-02 모델의 초기형상을 기반으로 차체 프레임 구조물에 대한 경량화 설계를 수행하였다. 전체 프레임을 14개의 부재로 나누었으며, 부재 두께를 설계변수로 정하였다. 효율적인 설계최적화를 수행하기 위하여 반응면기법을 이용하였다. 반응면기법을 통해 근사된 목적함수와 제한조건을 이용하여 최적화를 수행하였으며 각 설계변수들에 대한 감도도 산출하였다.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.117-127
• /
• 1995

The objective of this research is to investigate the effectiveness of rotating orthotropic axes model in analyzing reinforced concrete planar members under cyclic as well as monotonic loading. The structural members to be addressed are moderately reinforced beams, columns, beam-column joints, and shear walls, whose failure occurs due to compressive crushing after extensive crack propagation, The rotating orthotropic axes model which is usually used for monotonic loading is developed for cyclic loading. With the existing cyclic material models of reinforcing steel and bond-slip, this material model is used for the finite element analysis. For monotonic loading, the analytical results of the rotating orthotropic axes model are compared with reinforced concrete beams which have brittle failure. For Shear wall members under cyclic loading, the analyses are compared with the experiments for the ultimate load capacity, nonlinear deformation, and pinching effect due to crack opening and closing.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.1-6
• /
• 1998

손가락결합부재에 대한 정적휨시험 및 초음파 비파괴시험을 실시하였다. 발신 및 수신 변환기의 상대 위치와 두 변환기 사이의 거리에 따른 음전달속도의 변화를 분석하였으며 정적 휨시험으로 부터 구한 MOE 및 MOR과 비교하였다. MOR과 음전달속도는 손가락의 경사가 증가할수록 감소하였다. MOR은 음전달속도와 매우 밀접한 상관관계를 보였으나 MOE는 손가락의 경사도나 음전달속도에 큰 영향을 받지 않는 것으로 나타났다. 음전달속도는 섬유방향이 방사방향이나 접선방향에 비하여 더 높은 값을 나타내었다. 발신 및 수선 변환기를 동일면에 부착한 경우에 직각면 또는 반대면에 부착한 경우보다 더 높은 음전달속도를 나타내었다. 변환기 사이의 거리가 증가할수록 음전달속도는 양끝면에 변환기를 부착한 경우의 속도에 수렴하는 경향을 나타내었다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2007

There is a growing range of applications for concrete-filled steel tube (CFT) member because of its superior performance. But a CFT member may be uneconomical or has weight problems because it is fully filled with concrete. In this study, a new type of member, called internally confined hollow (ICH) CFT member, was developed to solve the high cost and weight problems of the CFT member. To determine stress-strain model of the concrete in an ICH CFT column, possible failure modes of an ICH CFT column were suggested and confining pressure was derived from equilibriums for each failure mode. From the derived equations, a computer program was coded and parametric studies were performed for some examples. Analytical results showed that internally confined concrete has enhanced strength and ductility compared with those of unconfined or biaxially confined concrete.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.79-93
• /
• 1998

The eigenvalue problem is presented for the building with added viscoelastic dampers by using component mode method. The Lagrange multiplier formulation is used to derive the eigenvalue problem which is expressed with the natural frequencies of the building, the mode components at which the dampers are added, and the viscoelastic property of the damper. The derived eigenvalue problem has a nonstandard form for determining the eigenvalues. Therefore, the problem is examined by the graphical depiction to give new insight into the eigenvalues for the building with added viscoelastic dampers. Using the present approach the exact eigenvalues can be found and also upper and lower bounds of the eigenvalues can be obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2005

The purpose of this study was to establish the accuracy of the industrial photogrammetry system constructed with INCA2 metric camera and V-STARS system on steel box girder measurement under industrial measurement condition. The objective of the measurement was to determine the distances of plane to plane or plane to libs, precise positions of the bolt holes and angles of the plane to plane on the steel box girder using coded targets, tape targets, edge targets and target adapters. The measurement undertaken has shown that industrial photogrammetry method were a very accurate and more importantly were produced quickly to measure the steel box girder.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1986

The stiffness matrix of circularly curved frame elements including the warping effects is formulated by the solutions of vlasov's differential equations, and the procedure for the elastic static analysis of curved girder systems by the displacement method is presented. The validity of this method has been demonstrated by comparing the analysis results with other solutions. And if the tangential lines of the two frame element axes connected at any nodal point coincide, the transformation to the global coordinate system can be omitted when we analyze the structures consisting of circularly curved elements. The theory introduced in this thesis can be applied with sufficient accuracy to the structures built up with horizontally circular curved frame elements which have closed or open cross sections and are symmetric to the axis perpendicular to the plane of the curvature, such as prestressed concrete box girder bridges.

• 방재와보험
• /
• s.98
• /
• pp.59-63
• /
• 2003

이 연구보고서는 2003년 2월에 홍콩에서 열린 Fire Asia Intermational 2003 세미나 중의 일부로서 영국의 랭커셔대학의 플레튼교수가 발표한 것을 요약 소개하는 것으로, 가열조건하에 있는 콘크리트 구조부재 횡단면의 온도분포이력을 예측하기 위한 비선형유한요소모델(FEM)에 대한 것이다. 콘크리트에 있어서 온도 특성은 온도와 수분에 모두 민감한 것으로 가정하였으며 기존의 몇 가지 시험들이 개발된 모델과 비교되었다. 또한 실험값은 기존의 실험 결과와 비교 확인하였다. 이 연구보고서는 화재에 노출된 스틸보강이나 다른 강구조물 및 부재를 콘크리트가 보호한다는 점으 기본 가정으로 하고 있다.