• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.554-554
• /
• 2009

지구온난화는 범지구적 환경문제로 매우 빠른 속도로 진행되면서 그 심각성을 더해가고 있다. 특히 해수면 상승이나 대형 태풍, 홍수, 가뭄 등의 이상기후가 빈번하게 발생되며 생태계에도 심각한 타격을 주고 있다. 이러한 지구온난화를 유발하는 물질들에 대해 도쿄의정서(Annex A)에 6대 온실가스($CO_2$ (이산화탄소), 메탄($CH_4$), $N_2O$(아산화질소), PFC(불화탄소), HFC(수소화불화탄소), $SF_6$(육불화황))로 정의 하여 규제대상으로 분류하고 있다. $CO_2$를 제외한 Non-$CO_2$ 온실가스들은 배출량이 $CO_2$에 비해 매우 낮지만 GWP(지구온난화지수)가 매우 커 지구온난화에 미치는 영향이 상당하다. 최근 이산화탄소 이외에 지구온난화 문제를 일으키는 온실가스에 대한 많은 관심으로 대상가스의 처리 또는 재활용을 위한 신기술 및 신공정 개발에 박차를 가하고 있다. 온실가스 중 HFCs는 GWP가 1300으로 미량의 배출로도 심각한 기후변화를 일으킬 수 있는 물질로, 우리나라의 경우 1990년 이후 HFCs 배출량 증가율은 연 평균 4.9% ~ 13.8%이다. 국내외 온실가스 처리기술은 대부분 CO2에 대한 연구개발 및 실증화가 지배적이고, non-CO2에 대한 처리기술 개발수준은 미흡할 뿐만 아니라 본 연구 대상인 HFCs 의 경우에는 처리기술 연구개발이 전무하다. 특히 HFCs는 냉매 또는 발포제로 사용되는데 일반적으로 사용 후 특별한 처리과정 없이 대기중으로 배출된다. 본 연구에서는 non-CO2 가스인 HFC-134a 를 대상으로 혼합가스에서 분리 회수를 위해 하이드레이트 기술을 접목시켜 경제적, 친환경적인 기술개발을 목적으로 한다. kinetic 반응장치와 고압반응기 및 magnetic drive system 을 이용하여 stirring speed와 driving force에 따른 HFC-134a 하이드레이트 형성속도의 상관관계를 제시하고자 한다.

• Composites Research
• /
• v.26 no.3
• /
• pp.170-174
• /
• 2013

Atmospheric glow plasma polymerization was applied to wood powder before fabricating polypropylene (PP) matrix composites. Seven different types of monomers (Oxygen, Benzene, CH4, Acrylic-acid, Hexafluoroethane, Trifluorotolune, Hexamethyl-disiloxane) were analyzed to determine the most suitable precursor for plasma polymerization. The surface energy was calculated from measured contact angle about each monomer on PP. Hexamethyl-disiloxane (HMDSO) had a highest surface energy and is selected as the most suitable monomer. Wood powder and polypropylene were mixed as pellets by twin screw extruder and then 50 wt% wood powder/PP composites were produced by an injection machine. Tensile strength and Flexural strength have improved by 7.59% and 12.43% at the maximum respectively. SEM (Scanning Electron Microscope) observation on the fracture surface revealed that the plasma polymerization have improved the interfacial bonding and the mechanical properties of the composites.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.65-73
• /
• 2000

This paper deals with a design and performance analysis of a parallel signal processing system based on TMS320C67x. With an emphasis on the board-level design of the processor unit four models are proposed with different memory configurations and internal bus schemes. Several approaches to parallel processing of 2D FFT are also presented to be used for performance analysis. The performance of four board models are estimated and compared in terms of the time spent for local memory access, inter-processor communication, and inter-board communication. The results of performance analysis show that, when performance and implementation complexity are taken into account, the model with both local and shared memories is the most desirable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1449-1457
• /
• 2007

A panorama image is constructed by merging several overlapped images to a big one. There are two kinds of methods, feature based and direct method, in the construction. Feature based one has a merit of processing speed faster than direct one. But, it is difficult to be implemented under slower processing environments such as mobile device. This paper proposed high speed construction method of a panorama image. The algorithm extremely improved matching speed by reducing the number of matching parameters using scene shot guider, and additionally adapted local matching technique to reduce matching error caused by the fewer matching parameters. In the experiments, it was shown that the proposed method required about 0.078 second in processing time, about 17 times shorter than the feature based one, for 24-bit color images of $320{\times}240$ size.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.51-56
• /
• 1971

To make certain of the white tip infection on rice, nematodes isolated from the rice seeds grown at Chongdo-goon Isu-myun and Kimje-goon Chooksan-myun were artificially inoculated and their pathway was studied. Also, studies were made for the hot water seed treatment as a measure of white tip control at different levels of water temperature and their germinablity was checked. The results are summarized as follows; 1. Causal nematodes survive in the paddy soil and cause white tip year after year. 2. Causal nematodes can survive in the rice seeds as long as the seeds loose their germinability. 3. Causal nematodes can disseminate throught the irrigation water. 4. Causal nematodes can disseminate through the soil move from a place to other place. 5. Causal nematodes can infect all of the parts of the rice and they can disseminate through any of the parts of rice. 6. The hot water treatment at 5$0^{\circ}C$ for 60 minutes were not effective controlling causal nematodes. But, either treatment of at 55$^{\circ}C$ for 15-20 minutes or at 6$0^{\circ}C$ for 10-15 minutes were effective and germination of seeds was not affected.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.783-788
• /
• 2002

Adaptive Cyclic Packet Dropping algorithm (ACPD), and Non-adaptive Cyclic Packet Dropping algorithm (NCPD) are applying stricter drop precedence than that of RIO algorithm. Especially, the ACPD algorithm drops adaptively packets for the congestion control, as predicting traffic pattern between each cycle. Therefore the ACPD algorithm makes up for the drawback of RIO algorithm and minimizes the wastes of the bandwidth being capable of predicting in the NCPD algorithm. And we executed a simulation and analyzed the throughput and packet drop rate based on Sending Priority changing dynamically depending on network traffic. In this algorithm, applying strict drop precedence policy, we get better performance on priority levels. The results show that the proposed algorithms may provide more efficient and stricter drop precedence policy as compared to RIO independent of traffic load. The ACPD algorithm can provide better performance on priority levels and keep stricter drop policy than RIO and the NCPD algorithm.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.47-54
• /
• 2008

To make up original defects of the wooden materials for decks, and to supply the wooden material for outdoor, we fabricated preservative treated plywood(PTP). Copper azole (CUAZ-1) preservative was treated with a normal full-cell process. Bond Strength of PTP was not affected after the preservative treatment. The anti-fungal efficiency and dimensional stability were obtained from PTP. A little discoloration of the surface was detected, but the dimensional change or peel bonded area off were not observed after accelerated weathering test. Although some strength of PTP was reduced after 17 months of field exposure, the PTP should be applicable for outdoor applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.387-387
• /
• 2010

식품산업 및 가정의 주방에 이르기까지 다양한 분야에서 식품을 가공 조리하는 곳에는 보건 건강을 위하여 비닐장갑은 반드시 필요하다. 최근에는 다양한 소재를 이용하여 위생 비닐장갑을 개발을 하고 있으나 일회용성으로 저가의 물품으로 인식되어 생활에 중요성에 비해 개발이 미흡한 실정이다. 위생 비닐장갑은 다양한 산업에서 필수품으로 활용되고 있는 만큼 위생적이고 내구성이 높은 제품의 개발이 절실히 요구되는 실정이다. 이에 본 연구에서는 봉합면의 측면이 사용중 터지지 않도록 하기 위하여 봉합선의 폭을 기존의 0.1 mm 대신에 1 mm정도로 넓게 하는 기술과 무균성 위생 비닐장갑의 제조 공정 자동화에 주력함으로써, 고품위 무균성 위생비닐장갑을 열공정 안정화 자동화 공정으로 제작코자 하였다. 본 연구의 수행시 당면한 가장 큰 문제점은 봉합선의 폭이 넓어짐에 따라서 knife 형태를 갖는 가열된 금형의 칼날이 비닐과 접촉되어 실링을 하는 단계에서 금형에 비닐이 녹아서 붙어버리는 sticking 현상이 발생하였다. 이는 현장에서 심각한 문제로 더 이상 상용화가 불가능함을 의미한다. 이에 본 연구에서는 금형(die) 재료로 2가지의 서로 다른 소재를 선택해서 상온 상압플라즈마 처리를 함으로써 금형과 비닐사이에 발생하던 sticking 문제를 해결하고자 하였다. 금형으로 사용한 소재는 스테인리스(STS304)와 공구강(SCM)을 사용하였다. 두 시편에 대하여 상온상압 플라즈마 처리를 수행한 뒤 증류수와 Diiodomethane를 이용하여 접촉각과 표면에너지를 측정하였다. 상온 상압플라즈마 처리 시간은 0 ~ 9초로 하였다. 스테인리스의 경우 접촉각이 증류수를 이용하였을 때 $69.7^{\circ}$, $32.2^{\circ}$, $16.7^{\circ}$였으며 Diiodomethane을 이용하였을 때는 $37.3^{\circ}$, $17.6^{\circ}$, $10.6^{\circ}$였다. 표면에너지(surface energy)의 경우 48.13 mN/m, 72.06 mN/m, 78.66 mN/m로 플라즈마 처리시간이 길어질수록 표면 에너지 값이 증가하였다. 공구강의 경우는 증류수를 이용하였을 때 접촉각이 $70.2^{\circ}$, $36.8^{\circ}$, $28.9^{\circ}$였으며 Diiodomethane를 이용하였을 때는 $38.65^{\circ}$, $22.8^{\circ}$, $20.2^{\circ}$였다. 표면에너지의 경우 47.43 mN/m, 69 mN/m, 73.15 mN/m로 스테인리스와 같이 표면에너지 값이 커지는 것을 확인할 수 있었다. 학술대회에서는 금형의 표면에너지를 증기시키거나 감소시키는 방법에 대한 연구결과를 발표할 예정이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.231-239
• /
• 2008

USN and RFID, as new technologies for realization of ubiquitous computing, are closely related with each other technically. Nevertheless, these technologies are recognized as a separate research topic, and there are few researches on technical convergence of the two research areas. In this paper, we propose an efficient processing method of various kinds of sensor data which are used in USN environment to provide efficiency from the view point of not only convergence of USN and RFID technologies but also cost and extensibility. Especially, we propose a method of conversion of various sensor data into EPC data format which can be handled in a RFID middleware. Using the proposed method, RFID middleware systems based on international standard specification can handle not only RFID tag data but also general sensor data efficiently, and various types of ubiquitous application services can be implemented at low cost and in a short time.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.160-173
• /
• 2013

This research aims to understand the precise character of relics based on literature search and material analysis of the jade excavated from the first buried place of King Jung-jo, and to assess the level of damage through non-destructive diagnosis. Furthermore, scientific conservation treatment was used to restore the original shape of the excavated jade. According to literature search, the excavated jade is known to be jasper, but material analysis showed that it was as a serpentine with the mineral composition of antigorite. Infrared thermography analysis to assess deterioration showed that the internal damage is the result of the interstices developed along the boundary surface of the obtained jade. For conservation treatment of the damaged area on the surface, the jade was filled with a mixture of plaster and glue, and covered with a mixture of acrylic paint and gloss medium for protection, and color was adjusted.