• Korean Journal of Agricultural Science
• /
• v.16 no.2
• /
• pp.179-200
• /
• 1989

Mucor miehei rennet(MR) was added as calf rennet(CR) substitutes in the fixed amounts of mixed rennets in making Camembert cheese. The conditions in the variations of chemical composition: water-soluble nitrogen, non-caseinic nitrogen, non-proteinic nitrogen, amino nitrogen, ammoniacal nitorgen, electrophoresis, molecular fractionation, mineral distribution, texture characterisitics, free amino acids and free fatty acids, were checked up with the sensory test and the chesse yields at each ripening period. The results obtained by investigating the utility of Mucor rennet were summarized as follows: 1. CR chesse, MR cheese and the mixed-rennet chesse failed to show any significant difference in their yields of 15%. 2. The contents of protein, fat and ash in MR cheese gave lower value than CR cheese did and with progress of ripening lactose decreased rapidly after 14 days of ripening. The difference among the rate of addition of mucor rennet was not recognized. 3. The WSN contents of 5 fresh sample chesse were from 14.7% to 17.3% and WSN increased from 39.7% to 41.0% with progress of ripening. After 21 days of ripening MR chesse had more WSN than CR cheese did. In NCN and ammoniacal nitrogen MR cheese showed higher value. 4. As the ripening progressed, MR chesse showed more cystein, phenylalanine and proline than CR chesse did but it failed to show any increase in aspartic acid, threonine and glutamic acid etc. 5. In the content of free fatty acid MR chesse showed higher value than CR cheese did and with the progress of ripening fatty acids increased from 8.36 mEq to 26.36 mEq but did not show any significant difference in the cheese types by the coagulant ratio. 6. Ca contents in the sample chesse were 0.238-0.27%, Mg 0.019-0.022%, Na 0.910-1.047%, and K 0.175-0.200%. The important non-sedimentable Ca in casein remained from 61 % to 77% without regard the ripening periods and added-rennets and Mg remained from 59.1% to 92.5% in non-sedimentable and water-soluble conditions. 7. In the fractionation of protein by ultrafilteration, MW> $5{\times}10^4$ decresed from 95% at the beginning period of ripening to 45% and MW< $10^4$ increased from 0.2% to 38% and definite caseinolysis was shown in all samples. 8. All the cheese showed to different electrophoretic patterns for the added-amounts of mucor rennet in the 14 days of ripenig. In the 28 days or ripening, MR cheese kept some bands on the patterns compared with CR cheese. 9. In vitro digestibility increased from 81.48-94.81 % to 94.47-98.61% but failed to show any significant difference in the cheese types by the coagulant ratio. 10. In hardness, MR cheese showed lower value compared with CR cheese as the ripening progressed. 11. The results of the sensory test failed to show any difference in flora rind, feelings in mouth and hands, deep structure, flavor and bitterness between CR Camembert cheese and MR Camembert chesse.

• Korean Journal of Organic Agriculture
• /
• v.17 no.3
• /
• pp.371-380
• /
• 2009

This study was conducted to assess effects of supplying different types of nitrogen sources as fertilizers on productivity and feed values of barley and rye as winter forage crops, and ultimately done to get good quality of organic forages with higher fertilization of soil. For barley, N+P+K plots were significantly (P<0.05) higher in annual dry matter (DM) and total digestible nutrients (TDN) yields than other plots. However, cattle manure plots had significantly (P<0.05) higher annual DM and TDN than P+K and non-fertilizer plots. Plots of 50%-cattle manure and mixed sowing with hairy vetch or forage pea were higher than only 50%-cattle manure plot, particularly, these were significantly higher than non-fertilizer, and their crude protein (CP) yields were much higher than other plots. Crude protein contents were significantly higher in N+P+K and 50%-cattle manure slurry plots than non-fertilizer and P+K plots, and plots of mixed sowing with hairy vetch or forage pea in application of 50%-cattle manure had higher CP content than other plots. ADF content was lowest in 50%-cattle manure+forage pea plots, but highest in 100%-cattle manure plots. NDF content was lowest in legumes-mixed sowing, but highest in 100%-cattle manure plots. TDN content was the highest in forage pea plots, and plots of 50%-cattle manure and legumes-mixed sowing had high RFV, but cattle manure plots rich in ADF and NDF content had the lowest TDN and RFV. For rye, plots of 50%-cattle manure+hairy vetch mixed sowing, and N+P+K application had significantly higher annual DM, CP and TDN than other plots except for cattle manure. DM productive efficiency to nitrogen fertilization was markedly higher for cattle manure plots than for chemical fertilizer. This tendency was more conspicuous in plots of 50% cattle manure+legumes-mixed sowing. CP content was higher for N+P+K plot than for all plots, and plots of 50%-cattle manure + legumes-mixed sowing were significantly higher than other plots. On the contrary, forage pea-mixed sowing plot had the lowest ADF and NDF, but TDN and RFV were significantly (P<0.05) higher than other plots. Grass crop cultivation together with legumes by applying livestock manure to soil may lead to higher palatability of livestock, and better quality of forage. Furthermore, cattle manure application increased production yield per ha and CP contents. Thus, when applying forage crops produced by cattle manure application and mixed sowing to organic livestock production, it was conceived that forages produced might become a substitute for foreign organic grain as protein sources.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.128-134
• /
• 2012

Foot and mouth disease (FMD) is one of the most notorious and contagious viral diseases afflicting cloven-hoofed animals. In this study, the physicochemical properties of leachate from a FMD landfill site at 773-1, Waryong, Andong, Korea and the ground water from 777, Waryong, Andong, Korea, were analyzed for 1 year from December $10^{th}$ 2010 to November $17^{th}$ 2011. The leachate was collected from the FMD landfill site during March, May, July, September and November, 2011 and changes in pH, brix, water content, insoluble solids, crude proteins, crude lipids, total and reducing sugars and ash content were determined. Considering the annual profiles of temperature and rainfall at the FMD landfill site, the dramatic changes in the physicochemical properties of the leachate from March to July, and especially from May to July, such as increases in pH, and a rapid reduction of brix and organic matter, may be closely linked to the growth of microorganisms in the leachate. The sharp decreases in the concentration of biominerals, such as Mg, Ca, and Fe from 1073, 4311 and 56.2 ppm in March to 151, 78, and 0.1 ppm in November, further suggest that decreases in organic matter in the leachate result from degradation by microorganisms originating from the intestines of the livestock. Analysis of the profiles of the organic materials in the leachate revealed that the properties of the leachate were similar to those of excremental matter-derived water. These results could be applied to a number of fields for the analysis of organic matter behavior, the development of the degradation process, and risk analysis in the environment for hygiene and food industries, of leachate from FMD landfill sites.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.344-350
• /
• 2003

In this paper, we propose a novel sharing method ordering the events occurring between users collaborated with the common telecomputing environment. We realize the sharing method with multimedia data to improve the coworking effect using teleprocessing network. This sharing method advances the efficiency of communicating projects such as remote education, tele-conference, and co-authoring of multimedia contents by offering conveniences of presentation, group authoring, common management, and transient event productions of the users. As for the conventional sharing white board system, all the multimedia contents segments should be authored by the exclusive program, and we cannot use any existing contents or program. Moreover we suffer from the problem that ordering error occurs in the teleprocessing operation because we do not have any line-up technology for the input ordering of commands. Therefore we develop a method of retrieving input and output events from the windows system and the message hooking technology which transmits between programs in the operating system In addition, we realize the allocation technology of the processing results for all sharing users of the distributed computing environment without any error. Our sharing technology should contribute to improve the face-to-face coworking efficiency for multimedia contents authoring, common blackboard system in the area of remote educations, and presentation display in visual conference.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.661-672
• /
• 2006

This study was performed to compare the shear bond strength of AQ Bond $Plus^{TM}$ with AQ $Bond^{TM}$ and Single $Bond^{TM}$. Also by observing the fractured interface under scanning electro-microscope, the fracture pattern and the quality of hybrid layer were analyzed. The possibility of clinical application of all-in-one system which has an advantage to reduce chair time for children with difficult behavior pattern was evaluated, The results obtained are as follows ; 1. There was no significant difference between AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ in shear bond strength and Single Bond showed the highest bond strength with statistical significant difference (p<0.05). 2. Adhesive fracture pattern was mainly observed in both enamel/dentin in AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ group while Single Bond group showed equal numbers for cohesive and adhesive pattern. 3. Under scanning electro-microscope, resin tags observed in AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ were very weak and tangled while strong and thick tags were shown with many lateral branches in Single Bond. Careful case selection and accurate clinical application is recommended when using AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$considering the result showing its weaker strength than Single $Bond^{TM}$.

• Research in Plant Disease
• /
• v.12 no.1
• /
• pp.15-19
• /
• 2006

This study was carried out to know pathogenicity of the pathogen isolated in several location of Korea and penetration mechanism of the Pseudocercospora vitis ($(L\acute{e}v)$.) Speg. Inoculation tests at room temperature were performed on both sides of leaves with different isolates of the fungus. The typical symptoms appeared on the abaxial leaf surface, but no symptom was observed on the adaxial leaf surface with all isolates. The average incubation period was nine days, since all symptoms appeared from 8 to 10 days after inoculation. In order to know the mechanism of invasion of P. vitis to grapevine, the behavior of penetration hyphae through stomata were compared in two cultivars having different level of resistance. In order to know the mechanism of resistance of grape vine to P.vitis, two cultivars having different level of resistance were compared by counting the numbers and measuring size of the stomata per leaf. In a susceptible cultivar Campbell Early, the number of stomata was more than that of a resistance cultivar 'Kyoho'. In a susceptible cultivar 'Campbell Early', the fungus entered readily into stomata after inoculation. However, in a resistant cultivar 'Kyoho', the fungus seemed to pass over or surrounded only the guard cells. In comparison of height of guard cells of stomata between the two cultivars, significant differences were observed by scanning electron microscopy and light microscopy. The height of guard cells of 'Campbell Early' showed a little higher than those of 'Kyoho' known to be resistant to the fungus.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.65-65
• /
• 2018

갈바륨 도금강판은 알루미늄의 우수한 차폐 특성과 내열성, 열 반사성을 가지며 아연의 희생방식 특성을 겸비하여 동일 부착량의 용융 아연도금 및 알루미늄 도금강판에 비해 우수한 내식성을 나타낸다고 알려져 있다. 또한 이것은 표면이 미려하고 경제성이 높아 건자재 용도로 현재까지도 세계적으로 널리 이용되고 있다. 여기서 지칭하는 바륨 도금강판(galvalume steel)은 아연과 알루미늄 도금강판의 장점을 접목하기 위해 55 Al-43.4 Zn-1.6 Si (wt.%)로 구성되어 개발된 3원계 성분의 합금도금강판이다. 한편, 최근에는 강재의 내식성을 향상시키기 위한 다양한 연구 결과에 의해 Zn-Al-Mg의 3원계 합금도금강판도 개발되어 사용되고 있다. 이것은 기존의 아연도금 강판 보다 10배 정도의 우수한 내식성을 나타내는 것으로 보고되고 있다. 특히, 이것은 도금된 평판부의 내식성은 물론 절단된 도금 단면부의 내식성도 매우 우수하다고 알려져 있다. 그러나 상기한 갈바륨 도금강판의 경우에는 도금된 표면부에 비해 단면부의 내식성이 상대적으로 취약한 것으로 알려져 있다. 따라서 본 연구에서는 갈바륨 도금강판의 내식성을 종합적으로 향상시키기 위하여 이 갈바륨 도금강판 상에 PVD 스퍼터링법에 의해 Mg 코팅막의 제작을 시도하였다. 여기서 Mg 코팅막은 후처리 된 갈바륨 도금강판 상에 Ar 공정압력 2 및 20 mTorr 조건 중 1.5 및 $3{\mu}m$ 두께로 제작하였다. 또한 제작한 코팅막에 대해서는 모폴로지 관찰(SEM) 및 결정구조 분석(XRD)을 하였고, 분극측정, 염수분무 시험(SST) 및 복합부식 시험(CCT)에 의해 표면 및 단면부의 내식성평가를 수행하였다. 또한 여기서는 염수분무 및 복합부식 시험 후의 시험편도 채취 하여 표면 및 단면부위에 대한 원소조성 분석(EPMA)과 결정구조 분석(XRD)을 실시하였다. 이상의 실험 결과에 의하면, 본 실험에서 제작한 Mg 코팅막은 그 두께가 두꺼울수록 표면 Mg 결정립의 크기가 증가하였고, 그 부식속도가 증가하는 경향을 나타내었다. 또한 여기서는 공정압력이 높은 조건에서 제작한 막일수록 Mg(002)면 피크 강도가 감소하고 Mg(101)면 피크의 배향성이 증가하였다. 그때 그 막의 내식성은 향상되는 경향을 나타내었다. 그리고 종합적으로 염수분무 및 복합부식 시험 결과에 의하면 Mg이 코팅된 갈바륨 도금강판은 기존 갈바륨 도금강판 보다 내식성이 현저히 향상되었다. 특히, 단면부 내식성의 경우에는 기존 대비 5배 이상 향상되는 경향을 나타내었다. 여기서 단면부 내식특성 분석을 위한 EPMA 원소조성 분석 결과에 의거하면, 부식 초기에는 마그네슘의 부식생성물에 의해 단면부가 치밀하게 보호되고 있음을 확인할 수 있었다. 그 이후에는 부식이 지속적으로 진행됨에 따라 갈바륨 도금층에서 용출된 알루미늄 및 아연 성분이 마그네슘과 함께 치밀한 부식생성물을 형성하여 단면부를 차폐함에 따라 단면부의 내식성이 크게 향상된 것으로 생각된다. 이러한 부식생성물의 결정구조 분석 결과에 따르면, 염수분무와 복합부식 시험에서는 공통적으로 MgO, $Mg(OH)_2$ 이외에도 Simonkolleite상 등이 형성되었다. 또한 건-습 반복 부식시험인 복합부식시험 후에는 $Mg_5(CO_3)_4(OH)_24H_2O$(Hydromagnesite)상 등이 형성됨을 확인할 수 있었다. 즉, 본 실험에서 후처리된 갈바륨 도금강판 상에 제작한 마그네슘 코팅막의 경우에는 상기와 같은 다양한 부식반응에 의해 표면 및 단면부에 형성된 Mg계 부식생성물과 $Zn_5(OH)_8Cl_2H_2O$(Simonkolleite)상에 의해서 표면은 물론 단면부 내식성이 크게 향상된 것으로 사료된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.719-723
• /
• 2014

For effective implementation of total maximum daily load (TMDL), this study presented the improving plans of non-point source pollution management including the classification of non-point source pollution, calculation of non-point source pollution load (generated, discharged), selection of non-point source pollution management regions and management of non-point source pollutant. First of all, the definition of point source pollution and non-point source pollution based on the legal and scientific viewpoint should be precisely classified and managed. Especially, the forest, grassland and river without occurrence of environmental damage by activity of business and human should be separately classified natural background pollutants. The unit for generated and discharged non-point source pollution should be preferentially changed according to actual condition of watershed. The calculation methods of generated and discharged non-point source pollution should be corrected consideration on the amount and duration of rainfall. While the TMDL is implemented, non-point source pollution management regions should be selected in the watersheds exceed the targeted water quality standards by the rainfall. The non-point source pollution management regions should be selected in the minimal regions where have high values of discharged non-point source pollution density in the urban area, farmland and site area except forest, grassland in the whole watershed. The non-point source pollutant treatment facilities, which take into consideration non-point source pollution load per unit area, duration of the excess concentration, realizable possibility of treatment, effectiveness of treatment cost versus point source pollutant, should be established in the regions with a large generated non-point source pollution load and a high concentration of water quality exceed the targeted water quality standards by the rainfall.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.436-447
• /
• 2006

Recently, there is increasing demand on enhancing the efficiency of hydro-seed spraying in afforestation for damaged or degraded land including forest road slopes. In this study, we focus on how seed coating and molding may affect seed germination and seedling growth. Plant species used in the study are Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudineila hirta, Poa pratensis, and Lolium perenne. The results of seed germination and seedling growth with and without seed coating and molding are analyzed as follows: 1. For all the species and in both seeding with molding covered with soil and seeding without molding in which seeds were over sown, the increment of germination ratio by seed coating method is greater than by non·coating one. Seed coating increases average germination ratios observed in seeding with molding and without molding by 11.2% and 21.4%, respectively. Germination force may decrease from 0.8 to 3.7 days depending on the plant species and the treatments. The $LD_{50}$ decreased by $0.8{\sim}2.6$ days. However, seed coating delays the start of germination by approximate 1 day for all of the observed plants. 2. Seed coating may have the effect of accelerating the growth of stem and leaf and root. The experimental result shows that seed coating leads to 21.7% and 34.8% increment of average stem and leaf growth by seeding with molding and without molding, respectively. In terms of root growth, seeding with molding results in 22.0% increment while seeding without molding produces 26.2% increased root growth. 3: Compared to seeding without molding, germination starts on an average of 1.3 days later in seeding coated seeds with molding. However. the germination ratio is increased by 5%, and germination force and $LD_{50}$ are observed to shorten by 1.0 day and 1.4 days, respectively. Meanwhile, whether seeds are coated or not may be more related with germination and seedling growth in seeding without molding than with those in seeding with molding. 4. In this study, coating materials are examined to look at which ones are better in each treatment. Coating with Vermiculite+Talcum is the most effective in germination and seedling growth for overall plants. Seed coating using Bentonite, Calcium Carbonate, and Calcium Hydroxide shows better results than non-coating does. 5. When seeds are coated, the greatest enhancement of seed germinations was observed in Indigofera pseudotinctoria and, in the case of seedling growth, Lespedeza cyrtobotrya has the most increasing observation value among the 5 examined species. These results may indicate that woody plant seeds, having greater sizes of seeds than ones of grass seeds, may have greater relation with seed coating than grass plant seeds may have. 6. Therefore, if seeds cannot be molded up after hydro-seeding on forest road slopes, it is recommended that seeds for restoration be pre-coated with Vermiculite+Talcum and then be sowed, in order to quickly stabilize the damaged slope and achieve successful afforestation.