• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.242-249
• /
• 1996

In order to improve the production yield of kindorase as complex antiphlogistic agent, molecular weight of concentration membrane, membrane configration, temperature, pressure and pH of concentration solution, fouling, etc. were investigated, and the results obtained are as follows 1. High production yield was shown using 10k Dalton molecular weight cut-off concentration membrane and spiral membrane made of polysulfone. 2. And it was reasonable conditions for maintaining the concentration solution at 3Bar in pressure. 3. The optimum pH of solution for improving production yield of kindorase were the range of 7.5 to 8.5, and for obtaining better production yield, clean in place(C.I.P) of membrane was treated with 0.1N NaOH at 40 to $50^{\circ}C$ for 30minutes.

• Journal of Periodontal and Implant Science
• /
• v.30 no.1
• /
• pp.121-134
• /
• 2000

Root conditioning has introduced to dissolve the smear layer and to produce surface demineralization, resulting to exposure of dentin collagen fibril and opening of dentinal tubules. The purpose of the present study was to examine the effect of different concentration and application time of tetracycline-HCL on root conditioning. Total 40 root specimen were prepared from 20 periodontitis-prone human single rooted tooth. The specimen were treated with tetracycline-HCL solution(20mg/ml, 50mg/ml, 100mg/ml)for 20 sec, 3 min, 5 min., and saline for 30 sec. The application method was rubbing method with cotton pellet. Under the scanning electron microscopy(20KV), the extent of smear removal and opening of the dentinal tubules were examined at x 3000. The following results were obtained. 1. Treatment of root specimen with saline did not remove the smear layer and open the dentinal tubules. 2. Treatment of root specimen with different concentration of tetracycline-HCL for 20 sec also did not remove the smear layer completely. 3. Treatment of root specimen with different concentration of tetracycline-HCL for 3 min opened the dentinal tubules and removed smear layer. 4. Treatment of root specimen with 50mg/ml of tetracycline-HCL for 3 min showed collagen fibril within the opened dentinal tubules. In conclusion, the effect of root conditioning with tetracycline-HCL is more dependent on the application time than the application concentration. Root conditioning with 50mg/ml tetracycline-HCL for 3 min is enough for obtaining the periodontal regeneration.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.540-549
• /
• 2005

It was the purpose of this study to investigate the effect of chitosan treatment and mordanting on the air-permeability, fastness of the dyestuff to washing, fastness of the dyestuff to light, and antimicrobial effect of cotton and nylon fabrics dyed using Rhusjara ica. In the dyeing experiment, examinations were made on the difference between the chitosan treated fabrics and chitosan untreated fabrics, and on the difference according to the type of mordanting agents and the mordanting methods. Dyeing was carried out for the chitosan treated and untreated fabrics under the conditions of non-mordanting and Al, Sn, Fe mordanting. As a result, due to the dye-uptake of the dyestuff component of the Rhusjara ica, the air-permeability values decreased considerably. And due to the action of the mordanting agents, the air-permeability decreased also. The air-permeability decreased more conspicuously in the case of the dyestuffs uptake to the chitosan components than in the case of the dyestuffs uptake to the cotton fibers or nylon fibers. Nylon dyed fabric exhibited better wash fastness than the cotton dyed fabric. As the number of washing increased, the color of the cotton fabric specimens and nylon fabric specimens, dyed using Rhusjara ica, shifted toward yellowish. The light fastness values were in the range of grade 1${\~}$2, which were very inferior. The light fastness values did not improve according to the mordanting or to the chitosan treatment. In the case of chitosan untreated fabrics dyed using Rhusjara ica, the growth rate of the bacteria promoted, on the contrary, compared to that of the control white fabric.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.11-20
• /
• 2015

In this paper, we propose a context awareness system to transfer accurate information of the app store based on collective intelligence. By using collective intelligence the system minimizes the errors that could occur when an individual process the problems, recommends APIs for developers and builds the app store for not only customers but also developers. In addition, this system applies the ontology technique to aware the context of consumers, recommends the app suitable for the consumer and provides the information for app developers. By utilizing the deduction technique of the Jena, the context awareness system infers the context of a consumer and constructs the app store system which improves the existing app stores. In the point of service transfer and accuracy, the proposed app store system module show better performance than the existing app store.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.87-93
• /
• 2014

Cadastral parcel objects as polygons are fundamental dataset which represent land administration and management of the real world. Thus it is necessary to assure topological seamlessness of cadastral datasets which means no overlaps or gaps between adjacent parcels. However, the problem of overlaps or gaps are frequently found due to non-coinciding edges between adjacent parcels. These erroneous edges are called uncertain edges, and polygons containing at least one uncertain edge are called uncertain polygons. In this paper, we proposed a new algorithm to efficiently search parcels of uncertain polygons between two adjacent cadastral datasets. The algorithm first selects points and polylines around adjacent datasets. Then the Constrained Delaunay Triangulation (CDT) is applied to extract triangles. These triangles are tagged by the number of the original cadastral datasets which intersected with the triangles. If the tagging value is zero, the area of triangles mean gaps, meanwhile, the value is two, the area means overlaps. Merging these triangles with the same tagging values according to adjacency analysis, uncertain edges and uncertain polygons could be found. We have performed experimental application of this automated derivation of partitioned boundary from a real land-cadastral dataset.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.173-180
• /
• 2014

The methods for implementing geocentric to geodetic coordinates conversion could be classified into two, which are respectively the closed-form and the iterative-form solutions. Essential conditions to achieve performances are accuracy, speed of convergence and/or simplicity of it's algorithm. Also, the algorithm must be valid at any of inner and outer points in the Earth, including center of Earth, the equatorial plane and the polar axis that are known as 'special regions'. This research planned for evaluating the feasibility of coordinates conversion in special regions, and comparing the accuracy of conversion solutions by using 10 methods for conversions from geocentric to geodetic coordinates. By comparing performances of statistical tests(with accuracy and solving success in special regions), Vermeille(2011) and Karney(2011) methods brought out more satisfied and finer results than other methods.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.738-741
• /
• 2000

Univorm epitaxial $CoSi_2$layers have been grown in situ on a (100) Si substrate at temperatures near$ 600^{\circ}C$ by reactive chemical vapor deposition of cyclopentadienyl dicarbonyl cobalt, (Co(η(sup)5-C(sub)5H(sub)5) ($CO_2$). The growth kinetics of an epitaxial $CoSi_2$layer on al Si(100) substrate was investigated at temperatures ranging from 575 to $650^{\circ}C$. In initial deposition stage, plate-like discrete $CoSi_2$spikes were nucleated along the <111> directions in (100) Si substrate with a twinned structure. The discrete $CoSi_2$plates with both {111} and (100) planes grew into an epitaxial layer with a flat interface on (100) Si. For epitaxial $CoSi_2$growth on (100) Si, the activation energy of the parabolic growth was found to be 2.82 eV. The growth rate seems to be controlled by the diffusion of Co through the $CoSi_2$layer.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.195-207
• /
• 2002

The domestic, quantity of copper slag as a by-product at copper smelting process reaches 700,000 tons annually while its application is limited. Therefore, the secure disposal plan of copper slag is urgently required. For this reason, in this study, copper slag was used as a substitute for sand in Sand Compaction Pile that is one of the improvement methods of soft ground because the particle size distribution of copper slag ranges from 0.15mm to 5m(coarse state) and it maintains stable glassy state environmentally. The geotechnical characteristics of copper slag were evaluated through laboratory model tests and the field application of copper slag was compared with generally used sand by pilot tests. From these experimental results, copper slag's material characteristics, bearing capacity, settlement reduction and improvement effects of surrounding ground were found to be superior to generally used sand. The copper slag can be used as a substitute far sand in the Sand Compaction Pile method and as recycling material of industrial by-product with high econonical and environmental value when natural resources are being exhausted.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.741-749
• /
• 2014

Prestressed hollow-core (PHC) slabs are structurally-optimized lightweight precast floor members for long-span concrete structures, which are widely used in construction markets. In Korea, the PHC slabs have been often used with cast-in-place (CIP) topping concrete as a composite slab system. However, the PHC slab members produced by extrusion method use concrete having very low slump, and it is very difficult to make sufficient roughness on the surface as well as to provide shear connectors. In this study, a large number of push-off tests was conducted to evaluate interfacial shear strengths between PHC slabs and CIP topping concrete with the key variable of surface roughness. In addition, the horizontal shear strengths specified in the various design codes were evaluated by comparing to the test results that were collected from literature.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.621-628
• /
• 2015

This paper describes an algorithm for detecting vehicles detection in real time. The proposed algorithm has the technique based on computer vision and image processing. In real, complex environment such as one with road traffic, many algorithms have great difficulty such as low detection rate and increasing computational time due to complex backgrounds and rapid changes. To overcome this problem in this paper, the proposed algorithm consists of the following methods. First, to effectively separate the candidate regions, we use vertical and horizontal edge information, and shadow values from input image sequences. Second, we extracts features by using HOG from the selected candidate regions. Finally, this paper uses the OS fuzzy-ELM based on SLFN to classify the extracted features. The experimental results show that the proposed method perform well for detecting vehicles and improves the accuracy and the computational time of detecting.