• Journal of Intelligence and Information Systems
• /
• v.7 no.1
• /
• pp.1-15
• /
• 2001

Recently, Internet based Electronic Commerce is recognized as one of the alternatives for strengthening sales power of small and medium companies. However, small and medium manufacturers can't adjust properly to the new environment because they are in short of money, personnel, and technology. To cope with this problem, this paper deals with the development of virtual manufacturing agent to support sales agent. The sales activity of most of parts manufacturing companies is based on orders of buyers. The process of promotion, receipt and selection of orders of the parts manufacturing is closely coupled with the load status of the production lines. On deciding whether to accept an order or not, as well as negotiating with buyers, sales person needs information such as load and schedule of production lines, manufacturability of the order. Therefore, the functions of virtual manufacturing agents manufacturability analysis, process planning, and scheduling are key features in developing an agent of sales activity for the parts manufacturing business. While most of research on virtual manufacturing system so far is focused on the simulation of each product, this paper deals with the development of agent assisting internet-based product sales by supporting production information promptly. The pilot system of virtual manufacturing agent is implemented using KQML-based agent template and Java-based expert system shell for a small molding company.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.16-33
• /
• 2011

Waste electrical and electronic equipment(WEEE or E-waste) is one of the fastest growing waste stream in Korea. The proper management of such equipment has become of major concern for solid waste professionals because of the large growth of the waste stream and the presence of a myriad of toxic materials with in it. In this paper in order to review the recycling system and recycling industries of the E-waste in Korea, the main frame concerning recycling of "Act on the Resources Recycling of Waste Electrical Electronic Equipment(WEEE) and End-of-life vehicles", recycling system, current recycling status, estimation of the E-waste generation, material flow of the E-waste, economics of PCB and recycling industries of the E-waste were surveyed.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.311-319
• /
• 2012

The purpose of this study is to investigate the dyeing property of gromwell on modified cotton fabric by chitosan. Modified cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Gromwell colorants were extracted with methanol. Modified cotton fabrics dyed using gromwell were post-mordanted using Al, Fe and Cu. The dyeability (K/S) and color factors (L, a, b, ${\Delta}E$ and h) of modified cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of modified cotton fabrics increased with the dyeing time. The saturated dyeing time was about 10minutes at $50^{\circ}C$. The dyeability (K/S) was remarkably increased with increasing content of chitosan because of having a amine group of chitosan. Modified cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing fastness of non, Al, Fe and Cu mordant in the presence and absence of chitosan were increased $1{\rightarrow}2$, $3{\rightarrow}4$, $4{\rightarrow}4-5$ and $4{\rightarrow}4-5$ respectively. And light fastness of non, Al, Fe and Cu mordant in the presence and absence of chitosan were increased $1{\rightarrow}1-2$, $1{\rightarrow}1-2$, $1.2{\rightarrow}2.3$ and $1-2{\rightarrow}2$ respectively.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.93-101
• /
• 1995

In this paper, we implemented a digital medical image management and a remote monitor display system for a personal computer. The designed system can display up to a 1280${\times}$1024 image which can accomodate eight images with a 256${\times}$256${\times}$8bits. When one of these images is clicked by the mouse, the selected image can be displayed with 256${\times}$256${\times}$8bits or 1024${\times}$1024${\times}$8bits. For the selected image, we can use one of the image processing functions in this system and send it to a remote monitor for the close examinations. To search and store digital images effectively, we constructed and image database management system with the B＋TREE structure. This system can be operated in an IBM-PC 386 or higher and all the function are performed easily with a mouse to provide a user firendly environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1069-1074
• /
• 2014

In this study, the piezoelectric characteristics of a piezoelectric paint sensor were investigated in relation to the poling time. This piezoelectric paint sensor was composed of PNN-PZT powder and epoxy resin with a 1:1 weight ratio. The dimensions of the paint specimen were $40{\times}10{\times}1mm^3$, and the top and bottom sides were both coated with a silver paste to create electrodes. During the poling treatment, the poling time was controlled to examine the effect of the piezoelectric properties, while the poling temperature was fixed at room temperature and the electric field was set to 4 kV/mm. The piezoelectric properties were measured by comparing the output voltage from the paint sensor to the force signal from an impact hammer when the impact hammer hit the specimen. In conclusion, the optimal poling conditions were found to be an electric field of 4 kV/mm and a poling time of around 30 min at room temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.89-89
• /
• 2009

높은 소수반송자 수명(life-time)을 가지는 고품위 실리콘 기판은 고효율 실리콘 이종접합 태양전지 제작을 위한 중요 요소 기술 중 하나이다. 본 연구에서는 n-type c-Si 기판을 이용한 고효율 실리콘 이종접합 태양전지제작을 위해 hot water oxidation(HWO) 공정을 이용하여 고품위 실리콘 기판을 제작하였다. 실리콘 기판의 특성 분석은 Qusi-steady state photoconductance (QSSPC)를 이용하여 소수반송자 수명을 측정하였으며, 기판의 면저항 및 wetting angle을 측정하여 공정에 따른 특성변화를 분석하였다. Saw damage etching 된 기판을 웨이퍼 표면으로부터 particle, 금속 불순물, 유기물 등의 오염을 제거하기 위해 $60{\sim}85^{\circ}C$로 가열된 Ammonia수, 과산화수소수($NH_4OH/H_2O_2/H_2O$), 염산 과산화수소수($HCL/H_2O_2/H_2O$) 및 실온 희석불산(DHF) 중에 기판을 각각 10분 정도씩 침적하여, 각각의 약액 처리 후에 매회 10분 정도씩 순수(DI water)에서 rinse하여 RCA 세정을 진행한 후 HWO 공정을 통해 기판 표면에 얇은 산화막 을 형성시켜 패시베이션 해주었다. HF를 이용하여 자연산화막을 제거시 HWO 공정을 거친 기판은 매끄러운 표면과 패시베이션 영향으로 기판의 소수 반송자 수명이 증가하며, 태양전지 제작시 접촉저항을 감소시켜 효율을 증가 시킬수 있다. HWO 공정은 반응조 안의 DI water 온도와 반응 시간에 따라 life-time을 측정하여 진행하였으며, 이후 PE-CVD법으로 증착된 a-Si:H layer 및 투명전도 산화막, 금속전극을 증착하여 실리콘 이종접합 태양전지를 제작하였다.

• Journal of Chest Surgery
• /
• v.34 no.5
• /
• pp.386-392
• /
• 2001

배경: 기관지에 광범위한 협착을 가지고 있는 환자들에게서 협착된 기관지 이하 부위에 있는 폐를 절제하지 않고 기관지 협착 부위를 교정하여 폐환기를 원할하게 하고자 하는 다양한 술식의 기관지 성형술이 고안시도되어 왔지만 만족할만한 술기는 아직 정립되어 있지 않다. 저자들은 이러한 기관지 협착을 교정하기 위한 술식의 하나로서 기관지 대치물을 이용한 기관 성형술의 효과를 조사하기 위하여 본 실험을 시행하였다. 대상 및 방법: 기관지 대치물로 사용한 두 종류의 첨포에 따라 성숙견을 실험 동물로 하여 두 군으로 분류하였으며 A군(5예)에서는 좌측 주기관지 전측방 부위를 0.5$\times$0.5cm 크기의 직사각형으로 절제한 후 늑연골에 자가 심낭편을 댄 동일한 크기의 첨포를 절제 부위에 부착하였고 B군(5예)에서는 동일한 크기의 기관지 절제 부위에 glutaraldehyde로 처리된 우심낭편을 부착하였다. 첨포를 이용한 기관지 성형술 12주후에 실험견을 도살하고 육안적 및 현미경적으로 관찰하였다. 결과: A군이 기관지 성형술 부위에서는 첨포의 외면은 주위의 결합조직과 막상유착을 이루고 있었으며 첨포의 가장자리는 자가 기관지에 잘 부착되어 있었다. 기관지 내면은 내경의 협착이 없이 윤기 있는 점막으로 잘 유지되어 있었고 자가 기관지와 첨호와의 경계면은 신생육아조직이 일부 차지하고 있었으며 새로운 이행 상피가 가교를 이루고 있는 현미경적 소견을 보았다. B군의 기관지 성형술 부위에서는 첨포의 와부는 암갈색으로 변화된 부분적 괴사의 양상을 보였다. 기관지 내면은 첨포와 가자기관지 경계부위에서 염증성 육아조직과 부분적 출현 양상을 보고 기관지 내경의 일부가 수축되었으며 자가 기관지로부터 첨포내로의 새로운 상피 형성은 되어 있지 않았다. 결론: 늑연골에 자가 심낭편을 댄 첨포는는 자가 기관지와 상피 가교를 형성하고 기관지 내강의 협착이 없이 구조를 유지하므로 기관지 협착 및 결손의 치료를 위한 기관지 성형술시에 기관지 대치물로 사용될수 있는 것으로 사료된다.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.215-221
• /
• 2016

This study conducted analysis of paint samples from defense industries equipments of Korean Conflict in The War Memorial of Korea to identify the characteristics of the modern paint. The samples were analyzed by microscopic observation, infrared spectroscopy and SEM-EDS. Cross-section of paint samples are made up of several layers of about 9 to 20 times, and thickness of the layer is not uniform in the $10{\sim}100{\mu}m$. The putty was used for the surface treatment before painting. Inorganic analysis showed that one type of the putty consist of minium and kaolin, talc, titanium dioxide. According to the results of infrared spectroscopy, paint samples were identified as alkyd resin. Some bands such as C-H bending, C-O and C-C stretching, C-H rocking were found in spectra.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.272-276
• /
• 1994

The dried cinnamon was extracted with enzymes, salts, sugars and additives in order to find the most effective extraction material. Enzymatic hydrolysis of cinnamon suspension with cellulase, hemicellulase, pectinase, ${\beta}-1.4-glucosidase$, tannase and lipase showed a little increase of their cinnamic aldehyde contents. Solid yield, antioxidant activity and degree of browning were increased in hemicellulase treatment. Acid and alkali extraction of cinnamon showed a some increase in solid yields and antioxidant activity was increased by addition of glucose and Na-ascorbate. Cinnamic aldehyde contents and degree of browning were increased in extraction with Na-citrate addition.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.108-118
• /
• 2001

In this paper, the conventional deblocing algorithms are compared in each region of the image. Based on the comparison result, we propose a new deblocklng algorithm that can improve subjectives as well as the objective quality. Because the human visual system is mode sensitive to the blocking artifacts in the low frequency re91on, we compare the performance of several deblocking algorithms in 7he low and high frequency region separately. For this purpose we also propose an algorithm for classifying the region into low and high frequency ones. and propose a deblocking algorithm which is applied differently to each region. The result shows that the adaptive LPF method yields the best performance in the low frequency region in terms of both subjective and objective quality. Hence. by applying the adaptive LPF method to the low frequency region, the performance of conventional algorithms can be improved. In the high frequency region. it is observed that the DCT-based POCS algorithm provides the best performance. Hence, by combining the algorithm with the adaptive LPF method, the best objective performance is obtained.