• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2005

To develop natural antimicrobial agents for extending the self-life of Kimchi, the effect of botanical antimicrobial agent-citrus products(BAAC) on microorganisms related to Kimchi spoilage was investigated. The inhibitory effect of BAAC on microorganisms related to Kimchi spoilage was increased according to the concentration of BAAC. Antimicrobial activities of BAAC against microoiganisms related to Kimchi spoilage were remarkably high. The effect of BAAC on the cellular membrane function of microorganisms showed the perturbation of cells in the presence of BAAC. Direct isualization of microbial cells by using both transmission md scanning electron microscope showed microbial cell membrane was destroyed by treating with BAAC. It could be confirmed that BAAC completely inhibit the growth of the test strains. The pH of BAAC-added Kimchi was a little higher than that of the control through the fermentation period. Titratable acidify, vitamin C and viable cells in BAAC-added Kimchi were changed more slowly than those in the control. Sensory evaluation did not show any significant difference between $0.01\%$ BAAC-added Kimchi and the control that showed the best palatabilities during fermentation.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.39-50
• /
• 1999

This research was carried out to investigate the development of fire-retardancy treatment technology and performance evaluation of fire-retardant treated plywoods. Radiata pine, keruing, dillenia, calophyllum and terminalia veneers were treated by normal(conventional) pressure soak(NPS) and vacuum-pressure-soak(VPS) using 20% water solution of diammonium phosphate. Then, 4.8mm thick, 3ply plywoods were fabricated with combination of fire-retardant treated, untreated or water-immersion types and several composition types of radiata pine and keruing veneers, i,e. the uniform and the mixed types in species composition, and the homogenious and the alternate layer types in veneer treatment. In composed species, the retention and the treatment effects of fire-retardant chemicals III radiata pine was still greater than those of keruing. The effect of VPS treatment was larger than that of NPS treatment, however, adhesive bonding strength and bending strength of plywoods treated by these two methods were not necessarily lowered, compared to those of untreated plywood. And also, fire endurance performance of the urea melamine resin-bonded plywood was greater than that of the phenol resin-bonded plywood. In result, the appropriate combination in veneer species and layer as well as alternate fire-retardant treatments would be more efficiently available in service.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.130-130
• /
• 2003

본 연구는 음식물찌꺼기의 재활용 방법의 일환으로 음식물 퇴비와 돈분 퇴비를 혼합, 고추 작물에 적용하여 생육 및 품질면에서 합리적인 시용량을 검증하고 토양 이화학적 특성변화 및 고추 생육과 수량에 미치는 영향을 평가하기 위해 실시하였다. 퇴비의 처리는 관행구(2ton/10a의 돈분 퇴비)와 음식물 퇴비 및 돈분 퇴비의 혼합구인 0.5t:1.5t, 1.0t:1.0t, 1.5t:0.5t, 2.0t:0ton/10a의 4개 처리구등 총 5개 처리구를 난괴법 3반복으로 수행하였다. 돈분 퇴비와 음식물 퇴비의 이화학적 특성을 분석한 결과 음식물 퇴비는 유기물이 기준량에 2배정도 높았으며, NaCl은 공정규격인 1%를 약 2.5배정도 초과하였다. 음식물 퇴비의 시용량 증가에 따라 토양 pH는 처리구별 특별한 변화는 없었으며, EC는 전체적으로 증가하였다. 생육기간 중 대조구와 음식물 퇴비의 처리구간 생육차이가 약간 나타났으며, 그로 인해 고추의 수량에 영향을 미친 것으로 판단된다. 음식물 퇴비 처리구에서 1ton/10a이상 일 때 시용량이 증가할수록 수확량 및 고추 개수에 있어서 감소 경향을 보였지만 수량 차이는 크지 않았다. 또한 capsaicin 함량에서도 음식물 퇴비 처리구간에 큰 차이는 보이지 않았다. 음식물 퇴비의 시용량에 따라 고추에 흡수되는 양분 흡수량은 큰 차이를 보이지 않았다. 결론적으로 음식물 퇴비를 시용한 고추 재배 시험에서 토양의 유기물 함량 증가, 물리성 개량, 토양 pH 완충력 증대 등의 효과를 보였다. 그러나 음식물 퇴비를 50%이상 돈분 퇴비와 혼합 시용시 고추의 수량이나 품질의 저하 및 토양의 염류집적의 우려가 나타났으나, 50%이하로 혼합 시용시 큰 무리는 없었다. 현재 적정 혼합비율을 구명하기 위한 연구가 진행중이다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.28-34
• /
• 2012

Various feature extraction algorithms are widely applied to real-time image processing applications for extracting significant features from images. Feature extraction algorithms are mostly combined with image processing algorithms mostly for image tracking and recognition. Feature extraction function is used to supply feature information to the other image processing algorithms and it is mainly implemented in a preprocessing stage. Nowadays, image processing applications are faced with embedded system implementation for a real-time processing. In order to satisfy this requirement, it is necessary to reduce execution time so as to improve the performance. Reducing the time for executing a feature extraction function dose not only extend the execution time for the other image processing algorithms, but it also helps satisfy a real-time requirement. This paper explains FAST (Feature from Accelerated Segment Test algorithm) of E. Rosten and presents FPGA-based embedded hardware accelerator architecture. The proposed acceleration scheme can be implemented by using approximately 2,217 Flip Flops, 5,034 LUTs, 2,833 Slices, and 18 Block RAMs in the Xilinx Vertex IV FPGA. In the Modelsim - based simulation result, the proposed hardware accelerator takes 3.06 ms to extract 954 features from a image with $640{\times}480$ pixels and this result shows the cost effectiveness of the propose scheme.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.14-19
• /
• 1994

Elephant food(Amorphophallus konjac K.) have been utilized its tubers in workedmaterials for a health and diet food. The author supposed that it was increased the area of cultivation and demand. This experiments were conducted to select the proper covering material during winter in order to increase yield of tubers and decrease input by 2 year's continuous cultivation, also to verified ability of seed germination and to measured efficiency of photosynthesis of plant. The proper covering materials for wintering were rice straw and rice hull. These materials were covered at 5 cm thick and at field was promoted according to emergence appearing after winter. The yields were 5,790kg /10a at 4,730kg /10a, respectively. Yield increase was 120% and 80% than that of control. The seeds collected at August 22 were germinated about 84 percent, and it was not necessary to treatment of low temperature or germination-accelerated chemicals. The widest leaf area was ranged $1,218-1,438cm^2$ at October 20 and was varied. The efficiency of photosynthesis was highest at 65-95 days after leaf emergence. The line of broad leaf and high photosynthetic efficiency per unit area was greater compare with yield. Therefore, it was supposed that these characteristics will use a marker for selection for high-yielding lines.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3447-3455
• /
• 1999

Database correctness is guaranteed by standard transaction scheduling schemes like two-phase locking for the context of concurrent execution environment in which short-lived ones are normally mixed with long-lived ones. Traditional syntax-oriented serializability notions are considered to be not enough to handle in particular various types of transaction in terms of duration of execution. To deal with this situation, altruistic locking has attempted to reduce delay effect associated with lock release moment by use of the idea of donation. An improved form of altruism has also been deployed in extended altruistic locking in a way that scope of data to be early released is enlarged to include even data initially not intended to be donated. In this paper, we first of all investigated limitations inherent in both altruistic schemes from the perspective of alleviating starvation occasions for transactions in particular of short-lived nature. The idea of two-way donation locking(2DL) has then been experimented to see the effect of more than single donation in distributed database systems. Simulation experiments shows that 2DL outperforms the conventional two-phase locking in terms of the degree of concurrency and average transaction waiting time under the circumstances that the size of long-transaction is in between 5 and 9.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.459-462
• /
• 2009

'Fuyu' (Diospyros kaki L.) is an important sweet persimmon cultivar, and the fruits are often stored in a modified atmosphere after harvesting in South Korea. However, blossom-end browning and darkening of fruit often occur after harvest or during storage, which decreases fruit quality in the fresh fruit market. High fruit calcium concentration would reduce oxidation of phenolic compounds in the cytoplasm such oxidation is responsible for fruit browning. This study investigated the effects of soluble calcium fertilization and foliar application, and indole-3-butyric acid (IBA) fertilization on fruit quality and browning. Trees received one of the following five treatments: 1) control (no calcium or IBA); 2) calcium fertilization (Ca FG, 2 mL per tree); 3) calcium foliar application (Ca FA, 2 mL); 4) calcium and IBA fertilization (Ca+IBA) 5) IBA fertilization (IBA, 2 mL. Fruit calcium concentration was highest in trees treated by Ca FA, and lowest in control trees. Generally, fruit calcium concentration was high in the stem end but low in the blossom end, which usually first develops fruit-browning symptoms. There were no apparent differences in fruit qualities such as firmness, soluble solid content, and weight among treatments. Fruit browning occurred at frequencies of about 14%, 20%, and 50% on Ca FA, Ca FG, and control trees, respectively. Therefore, the improved fruit calcium level seen when trees received Ca or IBA application tended to prevent fruit browning, which increased fruit quality and storage properties.

• The Korean Journal of Archival Studies
• /
• no.32
• /
• pp.177-217
• /
• 2012

The National Archives of Korea(NAK) has a mission to ingest large-scaled digital records and information from a number of different government agencies annually from 2015. There are important issues related to the digital records and information transfer between NAK and agencies, and one of them is how to configure deployment of digital repositories for the archives management systems. The purpose of this paper is to offer the way to design it by examining the checkpoints through the whole life cycle of digital records and information in the archives management systems and calculating the amount of ingested digital records and information to the systems in 2015 and deploying the digital repositories configured according to the amount the records and information. Firstly, this paper suggests that the archives management systems in NAK should be considered and examined into at least three different parts called Ingest tier, Preservation tier and Access tier in aspects to the characteristics of the flow and process of the digital records and information. Secondly, as a results of the calculation the amount of the digital records and information ingested to the archives management systems in 2015 is sum up to around 2.5 Tera bytes. This research draws several requirements related to the large-scaled data and bulk operations which should be satisfied by the database or database management system implemented on to the archives management systems. Thirdly, this paper configures digital repositories deployment according to the characteristics of the three tiers respectively. This research triggers discussion in depth and gives specific clues about how to design the digital repositories in the archives management systems for preparing the year of 2015.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.122-129
• /
• 2022

In this study, the hydrophilicity of the metal fiber is improved by introducing an oxygen-containing functional group to the fiber surface after treatment of the metal fiber using the oxygen plasma treatment time as an experimental variable. For the surface modification of metal fibers, changes in surface properties before and after plasma treatment were observed using SEM and x-ray photoelectron spectroscopy (XPS). In order to observe the effect of the plasma treatment time on the surface of the metal fiber, the change in contact angle of the metal fiber with respect to a polar solvent and a non-polar solvent was measured. After calculating the change in surface free energy using the measured contact angle, the contact angle and the surface free energy for metal fibers before and after oxygen plasma treatment were compared, and the correlation with the adhesion work was also considered. The microdroplet specimens were prepared to investigate the effect of surface changes of these metal fibers on the improvement of shear strength at the interface when combined with other materials and the interfacial shear strength was measured, and the correlation with the adhesion work was also identified. Therefore, the oxygen plasma treatment of the metal fiber results in an increase in the physical surface area on the fiber surface and a change in contact angle and surface energy according to the introduction of the oxygen-containing functional group on the surface. This surface hydrophilization resulted in improving the interfacial shear strength with the polymer resin.