• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.13-20
• /
• 2021

Recently, various piloti structures have been constructed in Korea to secure residential and parking spaces. However, these piloti structures have been constructed in the form of protruding columns without walls to secure parking spaces on the first floor. In this form, when an earthquake occurs, the column is relatively easily damaged compared to general structures, and such damage can lead to the collapse of the structure. Therefore, in this study, a study on securing the safety of the piloti structure using the MPS (Multi Performance System) seismic isolation device was conducted. Nonlinear dynamic analysis according to the presence or absence of MPS seismic isolation device was performed on the existing piloti structure, and analysis results were compared and analyzed. Finally, each seismic performance evaluation was performed and the superiority of the MPS seismic isolation device was verified.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.213-219
• /
• 2021

Polytetrafluoroethylene (PTFE) is a commercialized friction material in friction pendulum systems used for earthquake hazard mitigation in structures, and it has excellent chemical resistance and frictional performance. However, PTFE has a relatively low wear resistance for the friction pendulum systems in service. As an alternative to PTFE, a cost-effective frictional material, polyvinylidene fluoride (PVDF) strengthened by magnesium oxide (MgO), with enhanced wear resistance performance is proposed in this study. The frictional performance of the developed PVDF/MgO was evaluated through experiments and compared with that of PTFE. Accordingly, a friction pendulum system was designed using the measured friction coefficient. The performance of this friction pendulum system was evaluated via nonlinear time history analyses of bridges. Subsequently, the plausibility of using PVDF/MgO as an alternative to PTFE as a friction material for friction pendulum systems was discussed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.683-689
• /
• 1996

본 논문의 목적은 현재 국내에서 개념설계중인 KALIMER(Korea Advanced LIquid MEtal Reactor) 원자로구조물에 대한 면진성능과 내진여유도를 평가하여 이들 성능을 향상시킬 수 있는 주요 설계변경 부위를 검토하는 것이다. 이를 위하여 ANSYS 범용 유한요소해석코드를 이용하여 원자로구조물에 대한 3차원 유한요소해석모델을 작성하고 이로부터 집중질량 스프링으로 이루어진 지진해석모델을 개발하여 지진해석을 수행하였다. KALIMER 원자로 구조물에 대한 내진평가결과 내진능력(Seismic Capability)은 0.35g로 나타났으며 이는 Reactor Vessel Liner, Separation Plate그리고 Support Barrel의 연결부위의 수직 강성을 증가시키는 설계변경을 통하여 크게 향상될 수 있는 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.22-29
• /
• 2023

In the evaluation of seismic performance for structural materials and components, the loading rate and axial force can have a significant impact. Due to time-delay effects between input and output displacements, It is difficult to apply high-rate displacement in cyclic tests and hybrid simulations. Additionally, the difficulty of maintaining a consistent vertical load in the presence of lateral displacement has limited fast and real-time tests performed while maintaining a constant vertical load. In this study, slow, fast cyclic tests and real-time hybrid simulations were conducted to investigate the rate dependency and the influence of vertical loads of Isolation Bearing. In the experiment, the FLB System including an Adaptive Time Series (ATS) compensation and a state estimator was constructed for real-time control of displacement and vertical load. It was found that the vertical load from the superstructure and loading rate can have a significant impact on the strength of the seismic isolation bearing and its behavior during an earthquake. When conducting experiments for seismic performance evaluation, they must be implemented to be similar to reality. This study demonstrates the excellent performance of the system built and used for seismic performance evaluation and enables accurate and efficient seismic performance evaluation.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.6
• /
• pp.69-78
• /
• 2007

In this study, for the evaluation of seismic safety of the isolated Emergency Diesel Generator (EDG) System more quantitatively, the seismic fragility analysis method were proposed. Using the proposed method, seismic fragility analysis performed and a seismic risk of EDG system was present. The fragility analysis performed not for an existing EDG system but also for an isolated EDG system which increases the seismic capacity. At first, numerical models for existing and isolated EDG system were constructed and seismic response analysis performed according to input seismic waves and peak ground accelerations. An uncertainty factors and failure modes of both fixed and isolated EDG system were assumed for fragility analysis. The HCLPF values were evaluated for the compare the improvement effect using the isolation system. As a result, the isolation system can make better the seismic fragility of EDG system, but the failure of isolation system was govern the behavior of whole system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.477.2-477.2
• /
• 2003

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.401-408
• /
• 2002

교량의 건설에 있어서 내진설계가 주요문제로 부각되면서, LRB(Lead Rubber Soaring)가 한 방법으로 사용되고 있다. 특히, 설계변경 또는 내진보수.보강과 같이 제약 조건이 있는 상황에서 유용한 면진방법으로 적용된 사례를 찾아 볼 수 있다. 이와 같이 LRB의 사용이 증가함에도 불구하고, 그 특성을 엄밀히 검증할 수 있는 시험기준이 정립되어 있지 않다. 따라서, 실무에서 LRB를 사용하는 경우 많은 혼란이 발생하고 있으며, 구조물의 면진성능에 대한 신뢰성도 떨어뜨리고 있다. 본 연구에서는 실무에서 발생하는 혼란과 LRB의 성능에 대한 불확실성을 줄이기 위하여 특성시험 기준을 정립하였다. 특성시험 기준은 미국 HITEC의 면진장치 특성시험 기준과 일본의 시험 기준을 토대로 국내 시방서와 시공 및 설계환경에 적합한 기준을 제시하고자 한다. 특성시험절차는 LRB의 연직강성, 수평유효강성, 감쇠비, 내구성 등 총 8개 항목에 대하여 정리하였다. 이 절차에 따라, 본 연구에서 실험이 수행 될 것이며, 시험 결과를 분석.평가한 후 세부사항을 재검토하여 실무에서 유용하게 사용할 수 있는 기준을 제시하고자 한다.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.75-82
• /
• 2008

In this study, the possibility of vibration control of high-rise building structures by applying top-story isolation has been investigated. To this end, El Centro NS (1940) earthquake load is applied to 20- and 50-story building structures for numerical analysis. Artificial wind loads are used to evaluate the serviceability of example structures against wind vibration. As the number of isolated stories of example buildings is changed, structural responses has been evaluated to investigate optimal isolated building mass. And the natural period of isolation systems for top-story isolation is varied to investigate the improvement of control performance compared with the fixed base structure. Based on the analytical results, the top-story isolation system can be used as a hued mass damper and effectively reduce the structural responses of high-rise buildings against wind and seismic loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.774-779
• /
• 2020

The seismic response reduction capacity of a smart mid-story isolation system was investigated using the RNN model in this study. For this purpose, an RNN model was developed to make a dynamic response prediction of building structures subjected to seismic loads. An existing tall building with a mid-story isolation system was selected as an example structure for realistic research. A smart mid-story isolation system was comprised of an MR damper instead of existing lead dampers. The RNN model predicted the seismic responses accurately compared to those of the FEM model. The simulation time of the RNN model can be reduced significantly compared to the FEM model. After the numerical simulations, the smart mid-story isolation system could effectively reduce the seismic responses of the existing building compared to the conventional mid-story isolation system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.52-58
• /
• 2016

Recently, interest in structural stability has increased due to earthquakes. Isolation systems can improve seismic ability without harming the functions and appearance of existing and new constructions, and they have established efficiency in foreign country that have experienced earthquakes. In this study, an isolation system is suggested using a natural rubber bearing (NRB) on a stainless water tank for stability assurance in an earthquake. A shaking table test was carried out to evaluate the seismic capacity of a non-isolated water tank and an isolated tank. Displacement meters in the water tank measured the behavior characteristics of the tanks, which were compared using artificial seismic waves of 0.154 g, 0.231 g, 0.341 g, and 0.348 g with water levels of 0.0 m, 1.5 m, and 2.5 m. At 2.5 m, a decrement effect was generally shown in the isolated water tank, and a bigger displacement occurred in the non-isolated water tank than in the isolated one at water levels of 0.0 m and 1.5 m. It is interpreted that the weight of different water levels affects the decrement effect. If seismic reinforcement is done, the isolated bearing should be designed while considering the fluid storage level.