• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.177-188
• /
• 2021

In South Korea, with the advancement of the 'Port' project, the regeneration industry adapted to the modern economic development has been promoted, leading to construction around the port was also redefined. Therefore, through regeneration, the problem of image construction of buildings around the port has been re-examined, in which color is an important content of image construction. In this study, the exterior walls of abandoned factory buildings in the port area of Bongnaedong, Pusan were selected as the color research object and evaluated according to the characteristics of the regenerated factory buildings combined with the building color function. Technically, KSCP color analysis system is used for color analysis. In this way, the color plan for the exterior walls of the factory buildings is proposed to visually enhance the image of abandoned factory buildings and attract more attention, thus driving the regional economic development. The results of this study show that in order to adapt to the regional, industrial and commercial characteristics of the regenerated port space, the color hue, lightness, chroma and use area of the building can be changed to enhance the aesthetic value and enhance the inductivity and security.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.281-295
• /
• 2021

In this study, the direct amination of ethanol was performed over impregnated Ni on SiO2-Al2O3 mixed oxide catalysts prepared by varying Si/(Si + Al) molar ratio to 30 mol%. To characterize the physico-chemical properties of the catalysts used, X-ray diffraction (XRD), N2-physisorption, temperature-programmed desorption of iso-propyl alcohol (IPA-TPD), temperature-programmed desorption of ethanol (EtOH-TPD), temperature-programmed reduction with H2 (H2-TPR), H2-chemisorption and transmission electron microscopy (TEM) were used. The acidic property was continuously increased until Si/(Si + Al) = 30 mol% in SiO2-Al2O3 mixed oxides used. The dispersion of Ni metal and surface area, acid characteristics of the supported Ni catalyst have a complex effect on the catalytic reaction activity. The low reduction temperature of nickel oxide and acidic properties were beneficial to the formation of acetonitrile. In terms of conversion of ethanol, Ni/SiO2-Al2O3 catalyst with a molar ratio of 10 mol% Si/(Si+Al) showed the highest activity and a volcanic curve based on it. The tendency of results were consistent in the metal dispersion and catalytic activity.

• Clean Technology
• /
• v.27 no.3
• /
• pp.240-246
• /
• 2021

The waste etching solution for chip on film (COF) contained about 3.5% copper, and it was recovered through cementation using iron samples. The effect of cementation with plate, chip, and powder iron samples was investigated. The molar ratio (m/r) of iron to copper was used as a variable in order to increase the recovery rate of copper. As the molar ratio increased, the copper content in the solution rapidly decreased at the beginning of the cementation reaction. Before and after the reaction, the copper content of the solution was determined by Inductively Coupled Plasma (ICP) using copper concentration according to time. After cementation at room temperature for 1 hour, the recovery rate of copper had increased the most in the iron powder sample, having the largest specific surface area of the samples, followed by the chip and plate samples. The recovered copper powder was characterized for its crystalline phase, morphology, and elemental composition by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDS), respectively. Copper and unreacted iron were present together in the iron powder samples. The optimum condition for recovering copper was obtained using iron chips with a molar ratio of iron to copper of 4 giving a recovery rate of about 98.4%.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1273-1283
• /
• 2022

Recently, forest fires have frequently occurred due to climate change, leading to human and property damage every year. The forest fire monitoring technique using remote sensing can obtain quick and large-scale information of fire-damaged areas. In this study, the Gangneung and Donghae forest fires that occurred in March 2022 were analyzed using the spectral band of Sentinel-2, the normalized difference vegetation index (NDVI), and the normalized difference water index (NDWI) to classify the affected areas of forest fires. The U-net based convolutional neural networks (CNNs) model was simulated for the fire-damaged areas. The accuracy of forest fire classification in Donghae and Gangneung classification was high at 97.3% (f₁=0.486, IoU=0.946). The same model used in Donghae and Gangneung was applied to Uljin and Samcheok areas to get rid of the possibility of overfitting often happen in machine learning. As a result, the portion of overlap with the forest fire damage area reported by the National Institute of Forest Science (NIFoS) was 74.4%, confirming a high level of accuracy even considering the uncertainty of the model. This study suggests that it is possible to quantitatively evaluate the classification of forest fire-damaged area using a spectral band and indices similar to that of the Compact Advanced Satellite 500 (CAS500-4) in the Sentinel-2.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.65-71
• /
• 1984

As a primary step in studying the relationship between the arrangement of netting and the section shape of the bag net in the four-seam trawling net, a series of experiments were performed with the simplified model of the bag net made of vinyl film. This model was suspended horizontally in circularly flowing water, with two pairs of suspending threads to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the area distribution of each panel in the bag net was arranged by the portion of the length of the side panel, q to that of the lower or upper panel, p at the border of bag mouth. In the experiments, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two loadcells in circularly flowing water. From the results that the section shape of the bag mouth in circularly flowing water is controlled by the area distribution of panels in the bag net, the author estimated an experimental equation. h/w=k sub(1) e super(k) 2 super(q/p)+C, where h is the central height of the bag mouth, and w is the lateral width of that.

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.100-107
• /
• 2014

We evaluated preventive effects of Suaeda japonica (SJ) and Spergularia marina Griseb (SMG) on the insulin resistance in Otsuka Long-Evans Tokushima Fatty (OLETF) rats. The 10-week old OLETF rats were fed diets containing 3% (w/w) SJ and SMG for 18 weeks. Fasting blood glucose levels in SJ and SMG groups, measured using the oral glucose tolerance test, were lower than that of the control rats. The SMG group showed significantly lower levels of insulin, glycated hemoglobin, triglyceride, and total cholesterol than the control group. In addition, these levels were relatively lower in the SJ group than those in the control rats. The SJ and SMG groups had relatively lower protein levels of nuclear factor-kappa B (NF-${\kappa}B$) p65 in adipose tissue and serine phosphorylated insulin receptor substrate 1 (IRS-1) in skeletal muscle than the control group. These results suggest that SJ and SMG prevent insulin resistance and SMG in particular reduces blood triglyceride and total cholesterol levels.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.3
• /
• pp.309-333
• /
• 2012

Basalt having lots of feldspar phenocryst occurred at the northern and southern slope of the Mt. Halla, Jejudo. Among them, the Sioreum trachybasalt in southern slope consists of abundant phenocrysts of plagioclase in aphanitic groundmass. And the number of plagioclase grains are about 20 per $10cm^2$, and based on 667 grains the sizes are 13~0.7 mm (average 4.23 mm) in length and 8.6~0.5 mm (average 2.3 mm) in width. In according to modal analyses, Sioreum basaltic rock consists mainly of plagioclase (16~28%), olivine, clinopyroxene (1.5~6%) and opaque minerals (~0.1%) of magnetite and ilmenite as phenocryst and microphenocryst and groundmass (60~82%). The compositions of plagioclase, olivine and clinopyroxene are bytownite~andesine, chrysolite~hyalosiderite, augite respectively. Plagioclase phenocrysts show different type of zoning, namely, normal, reversal, patchy, oscillatory type. The An contents of zoned plagioclase mainly increase from core to rim. Those of oscillatory type from core to rim show variations of increase following decrease or decrease following increase, being more enriched in rim or almost same to core. Under the microscope, some plagioclase phenocrysts are especially melted in core part or marginal part, or found as only the remnant remain which resulted from reaction with melt. Some clinopyroxene are also corroded in margin part or found as irregular shape resulted from melting. The characteristics of petrography and compositional variation from core to rim of plagioclase and clinopyroxene, indicate that they are disequilibrium with melt and has been undergone geological environmental changes in magma batch during crystallization including magma mixing with replenishment of more mafic and high temperature melt.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2002

Purpose : X-ray film over responds to low-energy photons in relative photon beam dosimetry because its sensor is based on silver bromide crystals, which are high-Z molecules. This over-response becomes a significant problem in clinical photon beam dosimetry particularly in regions outside the penumbra. In intensity modulated radiation therapy (IMRT), the radiation field is characterized by multiple small fields and their outside-penumbra regions. Therefore, in order to use film dosimetry for IMRT, the nature the source of the over-response in its radiation field need to be known. This study is aimed to verify and possibly improve film dosimetry for IMRT. Materials and Method : Modulated beams were constructed by a combination of five or seven different static radiation fields using 6 MeV X-rays. In order to verify film dosimetry, we used X-ray film and an ion chamber were used to measure the dose profiles at various depths in a phantom. In addition, in order to reduce the over-response, 0.01 inch thick lead filters were placed on both sides of the film. Results : The measured dose profiles showed a film over-response at the outside-penumbra and low dose regions. The error increased with depths and approached 15% at a maximum for the field size of $15{\times}15cm^2$ at 10 cm depth. The use of filters reduced the error to 3%, but caused an under-response of the dose in a perpendicular set-up. Conclusion : This study demonstrated that film dosimetry for IMRT involves sources of error due to its over-response to low-energy Photons. The use of filers can enhance the accuracy in film dosimetry for IMRT. In this regard, the use of optimal filter conditions is recommended.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.90-95
• /
• 2008

It has become a big matter of concerns that the skill and measures against reduction of energy and cost for heating a protected horticultural greenhouse were prepared. But in these days necessity of cooling a protected horticultural greenhouse is on the rise from partial high value added farm products. In this study, therefore, a horizontal type geothermal heat pump system with 10 RT scale to heat and cool a protected horticultural greenhouse and be considered to be cheaper than a vertical type geothermal heat pump system was installed in greenhouse with area of $240\;m^2$. And cooling performances of this system were analysed. As condenser outlet temperature of heat transfer medium fluid rose from $40^{\circ}C$ to $58^{\circ}C$, power consumption of the heat pump was an upturn from 11.5 kW to 15 kW and high pressure rose from 1,617 kPa to 2,450 kPa. Cooling COP had the trend that the higher the ground temperature at 1.75 m went, the lower the COP went. The COP was 2.7 at ground temperature at 1.75 m depth of $25.5^{\circ}C$ and 2.0 at the temperature of $33.5^{\circ}C$ and the heat extraction rate from the greenhouse were 28.8 kW, 26.5 kW respectively at the same ground temperature range. 8 hours after the heat pump was operated, the temperature of ground at 60 cm and 150 cm depth buried a geothermal heat exchanger rose $14.3^{\circ}C$, $15.3^{\circ}C$ respectively, but the temperature of ground at the same depth not buried rose $2.4^{\circ}C$, $4.3^{\circ}C$ respectively. The temperature of heat transfer medium fluid fell $7.5^{\circ}C$ after the fluid passed through geothermal heat exchanger and the fluid rejected average 46 kW to the 1.5 m depth ground. It analyzed the geothermal heat exchanger rejected average 36.8 W/m of the geothermal heat exchanger. Fan coil units in the greenhouse extracted average 28.2 kW from the greenhouse air and the temperature of heat transfer medium fluid rose $4.2^{\circ}C$after the fluid passing through fan coil units. It was analyzed the accumulation energy of thermal storage thank was 321 MJ in 3 hours and the rejection energy of the tank was 313 MJ in 4 hours.