• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.387-396
• /
• 2022

In this study, the removal efficiencies of heavy metals were evaluated using cockle, abalone, and scallop shells. Cockle, abalone, and scallop are composed mainly of aragonite, aragonite, and calcite, and calcite, respectively. The specific surface area of each shell varies from 2.7241 m²/g to 4.5481 m²/g and the order of that is scallop > abalone > cockle. All shells of cockle, abalone, and scallop had no As removal effect by adsorption and precipitation as pH increased. Pb was removed by all shell samples at initial reaction. Although the removal efficiency of Cd and Zn were depending on the reaction medium, that was increased in order of scallop > abalone > cockle. Heavy metal removal efficiency tends to be slightly higher for heated samples than with the raw materials, and higher as the specific surface area is larger.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.913-920
• /
• 2011

In this paper, a logic process based 1-kbit EEPROM IP for RFID tag chips of 900MHz is designed. The cell array of the designed 1-kbit EEPROM IP is arranged in a form of four blocks of 16 rows x 16 columns, that is in a two-dimensional arrangement of one-word EEPROM phantom cells. We can reduce the IP size by making four memory blocks share CG (control gate) and TG (tunnel gate) driver circuits. We propose a TG switch circuit to supply respective TG bias voltages according to operational modes and to keep voltages between devices within 5.5V in terms of reliability in order to share the TG driver circuit. Also, we can reduce the power consumption in the read mode by using a partial activation method to activate just one of four memory blocks. Furthermore, we can reduce the access time by making BL (bit line) switching times faster in the read mode from reduced number of cells connected to each column. We design and compare two 1-kbit EEPROM IPs, two blocks of 32 rows ${\times}$ 16 columns and four blocks of 16 rows ${\times}$ 16 columns, which use Tower's $0.18{\mu}m$ CMOS process. The four-block IP is smaller by 11.9% in the layout size and by 51% in the power consumption in the read mode than the two-block counterpart.

• Journal of the Korean Geographical Society
• /
• v.40 no.4 s.109
• /
• pp.416-427
• /
• 2005

This paper aims to investigate morphological changes of deltaic barrier islands in the Nakdong Estuary and especially their spatial variations after barrage construction. We analyzed shorelines, geometrical centroids, and areas to reveal the changes of barrier islands. Here, we suggest three interesting points from this study. First, each individual barrier island in the Nakdong estuary goes through a different stage of the geomorphic cycle. The frontal barrier islands such as Sinja-do and Doyo-deung grow because they are located in front of the gates of the barrage. Sediments in water out of the gates are moved to offshore and then reworked by coastal processes such as waves and tides. Second, on the contrary, Baekhap-deung located behind Doyo-deung now diminishes indicating that sediments mainly move to the frontal growing island. Third, there is no morphological change in several barrier islands far away from the main flow of the Nakdong river such as Jinwoo-do, Daema-deung, and Jangja-do. In conclusion, barrier islands in the Nakdong estuary show distinct spatial variations. As a barrier island is closer to the main channel or is in the frontal location, there happens a very dynamic change in the morphology of the island.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.45-52
• /
• 2008

The objectives of this study are to explain a supply plan of domestic softwood log by long-term prospect of MDF production to stably promote industry of MDF. For it, we developed the long supply function as Ordinary Least Squares Method. Between 2005 and 2050, it was estimated that quantity of domestic production of MDF increased from 1,653 thousand $m^3$ to 2,041 thousand $m^3$. In 2050, quantities of domestic softwood log used by raw materials to product MDF of 2,041 thousand $m^3$ were estimated to be used about 1,355 thousand $m^3$. Exampling Pinus rigida used presently by raw materials to product MDF, cutting area of it is estimated to be 10,828 ha per year. And larch is cutted about 9,160 ha per year. This study estimated annual softwood log cutting amount and total afforestation area at 2050 year by 3 scenarios which are 35%, 45% and 55% about use of domestic softwood log for MDF production. If we do a criterion of cutting area, we advantage to plant larch. But the species of trees are use and growth property. We think that the afforestation policy must be performed on the base of those to supply raw materials of MDF. Although government plans hardwood afforestation policy after cutting Pinus rigida, it needs to support and manage certainly afforestation area of softwoods to need to supply raw materials of MDF to stably promote industry of MDF.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1824-1828
• /
• 2007

본 연구에서는 농촌, 산림 및 도시유역에서 발생하는 비점원오염이 하천 수질에 미치는 영향에 관하여 분석하였다. 연구 유역으로는 농촌유역인 유포리, 산림유역인 학술림 및 도시유역인 공지천 등 3개 유역을 선정하였다. 유포리 유역의 면적은 $1.96\;km^2$으로 토지이용은 밭 7.5%, 논 11%, 과수원 1.95%를 제외한 70%가 임야지역으로 나타났다. 산림유역은 면적이 $3.9\;km^2$으로 임산실습을 위한 제탄소 등 교육 및 연구시설을 제외한 대부분(99%)이 산림으로 잘 보전되어 있다. 춘천시에 위치한 공지천 유역은 구시가지와 산림으로 구성되어 있고, 면적은 $0.19\;km^2$중 불투수면적이 $0.15\;km^2$으로 유역면적의 81.9%를 차지한다. 연구유역별로 강우시에는 5분, 건기시에는 30분 간격으로 수위를 측정한 후 수위-유량 곡선을 이용하여 유량으로 환산하였다. 수질 자료는 강우시에는 1일 3회 이상, 건기시에는 2주일에 1회 채취 하여 T-N과 T-P의 분석항목을 환경부 제정 수질 공정시험법의 제반 규정에 따라 분석하여 유역별 오염부하를 산정하였다. 농촌 및 산림유역의 T-N과 T-P의 평균농도는 8.3 mg/L 및 0.3mg/L, 2.4 mg/L 및 0.1 mg/L로 나타났고 도시유역의 건기시와 강우시의 T-N과 T-P의 평균농도는 28.1 mg/L 및 3.1 mg/L, 20.6 mg/L 및 2.5 mg/L로 나타났다. 농촌, 산림 및 도시유역의 T-N과 T-P의 연오염부하는 각각 270.60 kg/ha 및 8.64 kg/ha, 223.16 kg/ha 및 13.87 kg/ha 그리고 612.37 kg/ha 및 69.14 kg/ha이 발생하였다. 100mm 이상의 강우가 발생한 $6{\sim}9$월의 유포리와 학술림의 T-N과 T-P의 오염부하가 연오염부하의 86% 및 88% 그리고 66% 및 82%로 나타나 강우량이 오염부하에 큰 영향을 미치는 것으로 나타났다. 그러나 도시유역의 오염부하는 강우량이 많은 $6{\sim}8$월보다 강우량이 적은 5월과 12월에 크게 나타났다. 토지이용별 T-N과 T-P의 연오염부하는 도시>농촌>산림유역의 순서로 나타났다. 공장, 가정하수, 생활하수 등의 오염원이 많은 도시유역에서 T-N의 오염부하량은 농촌 및 산림유역보다 $2{\sim}3$배 높게 이상 나타났으며 T-P의 경우는 $5{\sim}9$배 이상 높게 나타나 비점원오염 배출은 하천 주변의 토지이용이 큰 영향을 미치는 것으로 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.41-46
• /
• 2007

The residential fuel cell system was modeled as a box-shaped chamber with vent openings, filled with various components such as reformer, desulfurizer, fuel cell stack and humidifier. When the vent openings are 1% of the total surface and hydrogen leakage 1%, hydrogen concentration is around 0.1% higher than the other regions from leak points in the chamber at 30 seconds and hydrogen concentration is increased from 0.3% to 0.7% in the upper region of the system after 200 seconds. When the vent openings are 1% of the total surface and hydrogen leakage 1%, 3%, 5%, the steady state result of CFD, 5% of hydrogen leakage is reached the lowest ignition limit in the system. When the vent openings are 2% of the total surface and hydrogen leakage 1%, hydrogen concentration is increased in the bottom of the system for 60 seconds. After 250 seconds, hydrogen concentration is reached the steady state in the system. As the vent opening of the total surface increased from 1% to 2%, averaged hydrogen mole fraction is under 1% in the system, however, upper regions of the system from the hydrogen leakage points are shown over 1% of hydrogen mole fraction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.588-592
• /
• 2005

강우는 시간적인 분포특성과 함께 공간적인 분포특성이 매우 다양하게 나타나는 기상현상이다. 강우 발생의 특성을 파악하기 위해서는 시간적인 분포특성에 대한 분석과 함께 공간적인 발생양상에 대한 분석이 수행될 필요가 있다. 본 연구에서는 강우 Coverage 개념을 이용하여 공간규모의 분포특성에 대한 분석을 수행하였으며, 지속기간의 변화에 따라 공간규모 분포가 어떠한 변동특성을 나타내는 지 분석하였다. 분석을 위한 대상유역으로 한강유역을 선정하였으며, 한강유역 내에 위치한 39개 강우관측소의 시간강우자료를 이용하였다. 강우의 지속기간별 공간규모 변동양상을 파악하기 위하여 10가지 경우의 지속기간(1, 2, 3, 4, 6, 8, 12, 16, 24, 48시간)에 대해 자료를 구성한 후 분석을 수행하여 그 결과를 비교하였다. 분석을 통해 강우 공간규모의 발생양상에 대해 개략적인 파악이 가능하였으며, 지속기간 변화가 공간규모에 미치는 영향을 파악할 수 있었다. 또한 유역면적을 3가지 경우로 나누어 동일한 분석을 수행함으로써 면적 변화에 따른 공간규모변동을 개략적으로 파악할 수 있었다. 따라서 본 연구의 결과를 통해 강우발생 시의 공간규모에 대한 보다 명확한 분석을 위한 기초적인 정보를 제공할 수 있을 것으로 판단된다.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.4
• /
• pp.49-55
• /
• 2011

This study proposes proportions of functional areas in the ward of general hospitals, which are derived from 5 big university hospitals in order to establish the ward area standard for hospital design. The results of this paper are as follows. First, functional areas of hospital ward are composed of bedroom area, nursing area, training area, service area, and common area. Of course common area can be divided into first common area and secondary common area. The first common area(inter departmental common area) includes lobbies, elevator lobbies, corridors, restroom, and mechanical shafts. The secondary common area means the common area within special department such as ward or radiology department. Second, a standard method of calculating ward areas has been proposed: the standard is based on the center line of the wall between functional areas. Third, the proportions of 6 functional areas in ward are suggested.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.434-435
• /
• 2006

154kV 변전소 건설시 표준규모로 조상설비 설치공간을 확보하고 있으나 표준용량대비 초과설치가 필요하거나 기설 구형변전소에 조상설비를 설치하기 위해서는 옥외설치를 위한 추가 부지 확보가 반드시 요구된다. 하지만 산림훼손 최소화, 부지매수비용과다 등 변전소부지 확보가 한층 더 어려워진 현 여건을 감안할 때 전력용 콘덴서 설치를 위한 추가부지 확보는 곤란한 상황이다. 더욱이 도심지나 주택가 인근 변전소에 조상설비를 설치할 경우 옥외설치에 따른 소음발생, 미관훼손 등으로 인해 각종 민원이 끊이지 않는 실정이다. 이러한 문제점을 개선하기 위하여 설치면적을 최소화할 수 있는 조상설비를 개발하여 효율적으로 기기를 배치함으로써 건설예산을 절감하고 기술진보에 따른 변전설비의 소형화, 집적화, 자동화 추세에 부응하여 전력용 콘덴서 설비를 획기적으로 개선함으로써 도심지 및 주택가 인근 옥외 설치 시 발생되는 민원을 예방함과 동시에 설비운전의 안전성을 확보하고자 하였다. 이에 따라 설치면적 최소화, 미관 개선, 설비 신뢰도 및 안전성 향상을 목적으로 전력용 콘덴서 뱅크 구성에 필요한 각종 기기를 수납한 방재밀폐형 개폐장치부 전력용 콘덴서를 개발 추진하게 되었다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.165-171
• /
• 2001

We discuss the influence of annular binary filters on the axial PSF of imaging systems which are apodized by a radiallysymmetric filter and have spherical aberration and coma. In this paper we consider a whole family of annular binary fIlters in two cases. First, the binary filters are composed of two transparent annuli of the same area. Second, the binary filters are composed of a central clear circle and a concentric annular aperture with area bigger than that of the inner circle. In order to investigate the influence of the proposed filters on the axial PSF, we may use the axial resolution gains, which evaluate in terms of the FWHM of the intensity in the focal region of an apodized imaging system in comparison with that corresponding to a nonapodized one. We evaluate the PSF for the conventional and confocal systems having an aberration. ation.