• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제7권4호
• /
• pp.567-574
• /
• 2006

This paper focuses on lossy medical image compression methods for medical images that operate on three-dimensional(3-D) irreversible integer wavelet transform. We offer an application of unbalanced tree structure algorithm to medical images, using a 3-D unbalanced wavelet decomposition and a 3-D unbalanced spatial dependence tree. The wavelet decomposition is accomplished with integer wavelet filters implemented with the lifting method. We have tested our encoder on volumetric medical images using different integer filters and 16 coding unit size. The coding unit sizes of 16 slices save considerable dynamic memory(RAM) and coding delay from full sequence coding units used in previous works. If we allow the formation of trees of different lengths, then we can accomodate more transaxial scales than three. Then the encoder and decoder can then keep track of the length of the tree in which each pixel resides through the sequence of decompositions. Results show that, even with these small coding units, our algorithm with I(5,3)filter performs as well and better in lossy coding than previous coding systems using 3-D integer unbalanced wavelet transforms on volumetric medical images.

• Tunnel and Underground Space
• /
• 제22권1호
• /
• pp.43-53
• /
• 2012

Stability of cut-slope, the orientation and dimension of which are gradually changed, has been analyzed by employing the cross-section method capable of comprehensibly considering the lithological, structural and mechanical characteristics of slope rock. Lithological fragility is investigated by inspecting the drilled core logs and BIPS image has been taken to delineate the rock structure. Engineering properties of drilled-core including the joint shear strength have been also measured. Potential failure modes of cut-slope and failure-induced joints are identified by performing the stereographic projection analysis. Traces of potential failure-induced joints are drawn on the cross-section which depicts the excavated geometry of cut-slope. Considering the distribution of potential plane failure-induced joint traces blocks of plane failure mode are hypothetically formed. The stabilities and required reinforcements of plane failure blocks located at the different excavation depth have been calculated to confirm the applicability of the cross-section method for the optimum cut-slope design.

• Journal of the Korean Arthroscopy Society
• /
• 제17권1호
• /
• pp.76-78
• /
• 2013

The meniscus is considered "extruded" when it extends beyond the tibial margins more than 3 mm in a coronal view of magnetic resonance imaging (MRI). However, identifying the meniscal extrusion intraoperatively may be difficult because of the simple fact that most of the arthroscopic procedures are done in knee flexion position while follow up MRI studies area taken at knee extension position. Here, we demonstrate the arthroscopic technique for evaluating the meniscal extrusion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제20권2호
• /
• pp.101-105
• /
• 2010

Silicon electrode and ring in a plasma etcher those are in contact with harsh plasma suffer from periodic heating and cooling during their lifetime. This causes the silicon components failure due to thermal stress remaining the persistent slip bands (PSBs) on their surfaces. The factors that determine the lifetime of silicon electrode and ring were discussed with respect to silicon ingot. The impurity level and the average defect concentration measured with glow discharge mass spectrometer (GDMS) and microwave photo-conductance decay (${\mu}$-PCD) were compared with the grade of silicon ingots those are divided to slip-free and slip-allowed ingot. Some silp-allowed samples showed planar defects along <110> direction on {001} surface. The role of these defects was suggested from the viewpoint of the lifetime of silicon components.

• Journal of IKEEE
• /
• 제8권1호
• /
• pp.128-135
• /
• 2004

This paper proposes a phase measurement algorithm which is based on the recursive implementation of sliding-DFT. The algorithm is designed to have a robust behavior against the erroneous factors of frequency drift, additive noise, and twiddle factor approximation. The size of phase error caused by the finite wordlength implementation of DFT twiddle factors is shown significantly lower than that of magnitude error. The drastic reduction of the phase error is achieved by the exploitation of the quadruplet symmetry characteristics of the approximated twiddle factors in the complex plane. Four channel power-line phase measurement system is also designed and implemented based on the time-multiplexed sharing architecture of the proposed algorithm. The operation of the developed system is also verified by the experiment performed under the test environment implemented with the multi-channel function generator and the on-line interfaced host processor system. The proposed algorithm's features of phase measurement accuracy and its robustness against the finite wordlength effects can provide a significant impact especially for the ASIC or microprocessor based embedded system applications where the enhanced processing speed and implementation simplicity are crucial design considerations.

• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.81-97
• /
• 1994

두개하악장애는 환자의 신체적 소인, 관련조직의 구조적 변화, 정신적 스트레스 등의 복합적 요인에 의 발생하는 다인성 질환으로 최근 대두되는 원인중의 하나가 신체, 특히 두경부의 자세이상이다. 비정상적인 두경부자세는 하악의 위치변화를 수반하여 종종 두개하악장애를 야기시키게 되나 이를 설명할 수 있는 과학적 증거는 아직 부족한 실정이다. 저자는 두경부 자세가 교합장치물에 의해 변화되는지를 저작근의 근전도학적 측면에서 규명하고자 21세에서 26세의 치과대학생으로 치아상실 및 교합간섭이 없고 두 개하악장애의 증후 및 경부운동제한을 가지지 않은 정상인 20명을 대상으로 각도계를 사용하여 시상면상에서 인위적으로 유도한 세 가지의 두경부자세변화 (0$^{\circ}$, 30$^{\circ}$ 굴절, 45$^{\circ}$ 신전)에 따른 교합안정장치의 장착(1시 간) 전후 및 안정위와 근접촉위(초기치아접촉위)에서의 두경부 근육(측두근, 교근, 악이복근)의 근전도를 Bioelectric Microprocessor EM2ⓡ를 사용하여 측정한 후 통계학적으로 비교, 분석, 평가하여 다음과 같은 결과를 얻었다. 1. 교합안정장치 장착전 하악 안정위 및 근접촉위에서 두부의 30$^{\circ}$굴절은 악이복근의 근활성도를, 45$^{\circ}$신전은 교근 및 악이복근의 근활성도를 증가시켰다.(p<0.05) 2. 교합안정장치 장착후 하악 안정위에서 두부의 30$^{\circ}$굴절은 악이복근의 근활성도를, 45$^{\circ}$신전은 교근 및 악이복근의 근활성도를 증가시켰으며, 하악 근접촉위에서 두부의 45$^{\circ}$신전은 악이복근의 근활성도를 증가시켰다(p<0.05). 3. 교합안정장치 장착 전후 및 두부의 30$^{\circ}$굴절, 45$^{\circ}$신전에 따른 측두군 및 교근의 하악 근접촉위에서의 근활성도가 안정위에서의 근활성도에 비해 유의한 증가를 나타냈다(p<0.05).

• Journal of IKEEE
• /
• 제22권2호
• /
• pp.432-439
• /
• 2018

In this paper, an omnidirectional visible light detector was developed by making the detecting surface of a flexible solar cell in a cylindrical form, which has a uniform receiving pattern in the horizontal plane. This solar cell detector receives simultaneously multiple signal lights incident from different directions and provides electrical power to the ASK demodulator in the receiver. In experiments, time division transmission method was used to receive three signal lights incident from different directions to the solar cell detector. Each signal light was ASK modulated using a carrier of 40 kHz, and the synchronizing pulses required for time division transmission were generated by detecting the 120 Hz AC signal included in the indoor illumination lamp with Cds cells. This receiving structure is useful in constructing an $N{\times}1$ optical link in visible light communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제17권1호
• /
• pp.24-38
• /
• 2006

In this paper, we investigate the design and fabrication of a conical spiral antenna suitable for satellite TT&C applications. The shape of the spiral is optimized using a commercial electromagnetic software for good gain and axial ratio performances over $2.0{\sim}2.3\;GHz$ frequencies. A coaxial infinite balun feeding the spiral is designed using experimental methods. A method for precision fabrication of the spiral is presented. Measurements of the fabricated antenna show satisfactory performances over $2.0{\sim}2.3\;GHz$ such as a reflection coefficient less than -18 dB, a maximum gain greater than 4 dB, a gain greater than 0 dB over angles ${\pm}75^{\circ}$ from the antenna boresight, an axial ratio less than 5 dB over angles ${\pm}90^{\circ}$ from the antenna boresight, a front-back ratio greater than 15 dB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제34권6호
• /
• pp.683-693
• /
• 2010

In this paper, we propose a new parallel mechanism for the legs of biped robots and the control of the robot's locomotion. A leg consists of two 3-DOF parallel platforms linked serially: one is an orientation platform for a thigh and the other is the 3-DOF asymmetric parallel platform for the shank. The desired locomotion trajectory is generated on the basis of the Gravity-Compensated Inverted Pendulum Mode (GCIPM) in the sagittal direction and the Linear Inverted Pendulum Mode (LIPM) in the lateral direction, respectively. In order to simulate the ground reaction force, a 6-DOF elastic pad model is used underneath each of the soles. The performance and effectiveness of the proposed parallel mechanism and locomotion control are shown by the results of computer simulations of a 12-DOF parallel biped robot using $SimMechanics^{(R)}$.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제20권1호
• /
• pp.1-7
• /
• 2016

Most of the work has been done till now focused on flows over wall mounted cavities in a straight wall where the incoming flow is uniform. However, the investigation on such kind of flow over a cavity mounted on the curved walls has been seldom reported in the existing literatures. In the present study, the numerical analysis was performed to investigate the cavity flow mounted on the curved walls. The effects of wall shape, the curvature radius and the flow Mach number, were investigated for high-subsonic flows. The results show that the static pressure of cavity floor increases as the L/R increases. This effect is found to be more significant when the flow Mach number is higher. The cavity drag for the curved walls are higher as compared with that of straight wall.