• Journal of Power System Engineering
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2009

Numerical Calculations for dimensionless pressure drop (friction factor times Reynolds number) have been obtained for fully developed laminar flow of MPL(Modified Power Law) fluid in isosceles triangle pipes. The solutions are valid for Pseudoplastic fluids over a wide range from Newtonian behavior at low shear rates through transition region to power law behavior at higher shear rates. The analysis identified a dimensionless shear rate parameter which for a given set of operating conditions specifies where in the shear rate range a particular system is operating, i.e., Newtonian, transition or power law region. The numerical calculation data of the dimensionless pressure drop for the Newtonian and power law regions are compared with previously published asymptotic results presenting within 0.16 % in Newtonian region and 2.98 % in power law region.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1037-1049
• /
• 2001

Considerable interest has evolved in the flow of non-Newtonian fluids in channels of noncircular cross section in compact heat exchanges. Analytical solution was developed for prediction of the flow rate and maximum velocity in steady laminar flow of any incompressible, time-independent non-Newtonian fluids in straight closed and open channels of arbitrary, but axially unchanging cross section. The geometric parameters and function of shear describing the behavior of the fluid model were evaluated for fluid flow among a bundle of rods arranged in triangular and square array. Numerical values of dimensionless maximum velocities, mean velocities, pressure-drop-flow parameters and friction factors were evaluated as a function of porosity and pitch-to-radius ratio.

• Water for future
• /
• v.28 no.5
• /
• pp.129-140
• /
• 1995

In this study we derived steady-state relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage through numerical experiments with Richards equation on a hillslope. Numerical experiments analyzed the sensitivity of topographic and soil hydraulic properties on steady-state relationships between surface saturation area and subsurface outflow. And the power law for the extent of surface saturation area was determined as a function of subsurface outflow or soil moisture storage.

• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.150-157
• /
• 1995

본 논문의 목적은 협착이 발생괸 원관과 분기관내 혈액과 혈액대용유체의 유동문제 에 수치해석방법을 적용하여 유동특성을 파악하는데 있다. 혈액대용유체로서는 Separan AP-273 500wppm 수용액과 Carpobol 934 1.0w% 수용액을 사용하였다. Carbopol 수용액의 유변학적 성질은 수정멱법칙모델, 그리고 혈액과 Separan 수용액의 유변학적 성질은 Carreau 모델로 나타내었다. 협착관유동에서 Carbopol 수용액의 재부착거리는 혈액이나 Separan 수용액의 경우보다 길고 협착으로 인한 압력강하는 Carbopol 수용액, 혈액, Separan 수용액의 순으로 작게 나타난다. 분기관유동에서 Separan 수용액의 압력손실은 혈 액과 Carbopol 수용액보다 작게 나탄나고 협착이 발생괸 부기관내에서 혈액과 Separan 수 용액의 압력손실은 협착이 없는 분기관의 압력손실보다 크게 증가한다.

• Journal of Integrative Natural Science
• /
• v.1 no.2
• /
• pp.67-75
• /
• 2008

행위자 기초 모형을 이용하여 행위자의 시장에 대한 불균일한 영향력에 대한 연구를 수행하였다. 이때 가중치를 금융시장에서 행위자 간의 공유하는 정보의 영향력의 크기로 사용하였으며 가중치의 크기와 분포가 수익의 변동에 기여하는 것을 관찰하였다. 행위자들의 가중치의 크기가 평균적으로 클수록 가격의 변동의 크기도 같이 증가함을 알 수 있었으며 가중치의 크기뿐만 아니라 가중치의 분포에 따라서도 수익의 분포가 변하게 된다. 이는 신흥시장과 성숙한 시장에서 관찰되는 분포의 차이와 관련하여 유사성을 찾아볼 수 있을 것이라는 가능성을 제공한다. 행위자의 정보의 영향력은 항상 일정하지 않고 그 영향력이 행위자의 시장 예측에 대한 적중률에 따라 변하게 된다. 이렇게 변화하는 행위자들의 정보의 영향력의 분포는 결국 소수의 큰 영향력을 갖는 행위자와 다수의 영향을 거의 끼치지 못하는 행위자들로 분포되게 된다. 그 분포는 초기의 행위자들의 영향력 분포가 어떻게 되었든 간에 충분히 시간이 흐르면 모두 멱법칙을 따르는 분포를 갖게 된다.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.154-160
• /
• 2003

Multi-path ultrasonic flowrate measuring technology is being received much attentions from a variety of industrial fields to exactly measure the flowmeter. Multi-path ultrasonic flowmeter has much advantage since it has no moving parts and not occurred pressure loss. It offers good accuracy, repeatability, linearity and Tum-down ratio can measure over 1:50. The present study investigates flowrate integration errors using weighting factors. A theoretical flow model uses power law to describe a fully developed velocity profiles and wall roughness changes. The methods of weighting factor simulate three configurations of measuring location of gaussian, chebyshev and tailor method. The obtained results show that many chord arrangements are not affected for wall roughness changes and can measure accurate flowrate.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.549-556
• /
• 2005

Effects of the dimensionless variables on the heat transport phenomena in the extrusion process of a single screw extruder have been studied numerically. Based on the understanding of the solids conveying related to the geometrical structure and characteristics of the screw, the heat balance equation for the solids conveying zone was established and normalized. The finite volume method and power-law scheme were applied to derive a discretized equation and the equation was solved using the alternating direction iterative method with relaxation. Effects of the dimensionless parameters, Biot and Peclet numbers, that define the heat transfer characteristics of the solids conveying zone have been investigated with respect to the temperature of the feeding zone and the length of the solids conveying zone. As the Biot number is increased, the heat loss by cooling dominates to decrease the temperature of the barrel but it has little effects on the temperature of the solids bed and the length of the solids conveying zone. On the other hand, if the Peclet number is increased, the convection term dominates to decrease the temperature of the solids bed and it results in an increase in the length of the solids conveying zone.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.937-953
• /
• 2013

The theoretical discussion of generation process and development directions of economic fluctuations are actively discussed. This study describes the economic changes applied to empirical research on economic volatility in Korea under the economic theory of network theory [Acemoglu, et al. 2012, 2010]. For the three years in 2000, 2005, and 2010, the network analysis were applied to industry input-output tables. The research results show that the network economic structures in Korea is shifted from a high connectivity among sectors to a lower connectivity. Also, the impact of key industries and the mutual connectivity of input and out among industrial sectors are weaken. Implications for industry and technology policy are derived form the study results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.349-356
• /
• 2002

For two kinds of 25Cr-20Ni stainless steels, STS310J1TB and STS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392 MPa and from 923 to 773 K with a special reference to tertiary creep. The average creep life of STS310J1TB was about 100 times longer than that of the STS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in STS310J1TB, while that of the STS310S was 274kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for STS310S below PLB is close to the for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for STS310J1TB was reduced to the activation energy for diffusion of chromium atom in gamma steel. The stress exponent of STS310S was about 12.3 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for STS310J1TB was in a power law creep region, its stress exponent was 7.9 larger than that of STS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in STS310J1TB.

• Journal of KIISE
• /
• v.43 no.10
• /
• pp.1131-1143
• /
• 2016

How can we effectively compress big graphs composed of billions of edges? By concentrating non-zeros in the adjacency matrix through vertex rearrangement, we can compress big graphs more efficiently. Also, we can boost the performance of several graph mining algorithms such as PageRank. SlashBurn is a state-of-the-art vertex rearrangement method. It processes real-world graphs effectively by utilizing the power-law characteristic of the real-world networks. However, the original SlashBurn algorithm displays a noticeable slowdown for large-scale graphs, and cannot be used at all when graphs are too large to fit in a single machine since it is designed to run on a single machine. In this paper, we propose a distributed SlashBurn algorithm to overcome these limitations. Distributed SlashBurn processes big graphs much faster than the original SlashBurn algorithm does. In addition, it scales up well by performing the large-scale vertex rearrangement process in a distributed fashion. In our experiments using real-world big graphs, the proposed distributed SlashBurn algorithm was found to run more than 45 times faster than the single machine counterpart, and process graphs that are 16 times bigger compared to the original method.