• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.275-278
• /
• 2002

The purpose of this study is to investigate the combustion characteristics of the flat burner using metal fiber. By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber were found and the range of the blue flame mode and radiant mode were distinguished and $NOx\;and\;O_{2}$ distributions in combustor were measured at two conditions which represents the blue flame mode and radiant mode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.111-114
• /
• 2002

The purpose of this study is to investigate the flow analysis for the optimum design of flat burner using the surface combustion technique. The numerical analysis far flows were compared with the experimental results in order to get a basic database for establishing the integrated numerical method of combustion flows. As results, we knew the current numerical calculation method had confidence with error range under $6{\%}$ in compare with the experiments.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.92-97
• /
• 2002

By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber burner were found and the range of the blue flame male and radiant mode were distinguished by direct photography. The results in our experiments for the flame stability zone were from a=1.4($354 KW/m^2$) to a=2.06($240 KW/m^2$), and then the blue flame mode zone was form a=1.87($266 KW/m^2$) to a=2.06($240 KW/m^2$) and the radiant mode one was form a=1.4($354 KW/m^2$) to a =1.78($278 KW/m^2$). And the flame was not fired when a is less than the lean condition a=2.45($202 KW/m^2$).

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.397-405
• /
• 2011

친환경 대체에너지의 한 분야인 수소에너지는 물의 전기분해와 화석연료의 개질을 통해 얻어 진다. PEMFC용 개질기에 적용 가능한 난류예혼합 방식의 메탈화이버 플랫버너를 제작하였다. 공급열 량에 따른 연소영역의 평균온도분포와 CO, HC, $CO_2$ 및 $O_2$등 각종 화학종의 평균농도로 플랫버너의 화염구조 및 특성을 조사하여 개질기 적용 가능성을 확인하였다. 그리고 PIV 유동실험결과와 유동수 치해석 결과를 비교 분석하여 차후 PEMFC용 개질기 개발에 있어 수치해석을 적용하기 위한 기초연구를 진행하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.512-522
• /
• 2018

This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ($T^4_{sur}-T^4_{\infty}$) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.

• 에너지공학
• /
• 제21권4호
• /
• pp.385-392
• /
• 2012

본 연구는 현재 콘덴싱 보일러에 많이 사용하는 다공성 소재중에서 메탈화이버(metal fiber, MF) 및 세라믹(ceramic, CM)으로 제작한 평판형 버너에 대해 연소 및 열특성을 비교 검토하고 그 결과를 향후 개발할 EGR(Exhaust gas recirculation) 콘덴싱 보일러에 적용할 버너 선정의 기초자료로 활용하는 것을 목적으로 한다. CO 배출량은 CM이 MF보다 높았고 NOx 배출량은 MF가 CM보다 높게 나타났다. 버너열량 변화시에는 버너열량이 클수록 효율이 높게 나타났으며 버너 소재별 열효율은 버너열량 변화와 관계없이 MF가 CM보다 높게 나타났다. 본 실험범위에서 KS B 기준과 EN 677기준을 근거로 비례제어, 열효율, CO 및 NOx 배출량을 고려할 때 버너 소재는 MF가 적절하며 당량비는 0.8일때가 최적 운전조건으로 판단된다.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1033-1040
• /
• 2011

예혼합 버너는 높은 효율과 낮은 배기 때문에 가정용 보일러 버너 시스템에 매우 강력한 버너이다. 일반적으로 가정용 보일러 버너는 내부에 농후한 예혼합 불꽃으로 구성하고 연료는 2차공기의 공급에 의하여 완전연소 되는 분젠 버너를 이용한다. 이것은 상대적으로 긴 불꽃 길이와 높은 과잉공기비에서 작동하기 때문에 높은 효율을 갖는 소형 보일러에 적용하기 어렵다. 이 논문에서 메탈 화이버, 세라믹, SUS 핀과 같은 매질을 사용하는 예혼합 연소 버너의 특징을 실험하였다. 특히, 표면 매질의 비반응 유동 특성은 버너 표면 전체의 유동 속도를 측정하고 조정하였다. 연소 실험은 화염 사진과 화염 온도 측정에 의하여 수행되었다. CO와 NO는 다양한 과잉 공기비와 열량값에 대하여 버너 표면 매질, 연소실, 열교환기의 특성을 측정하고 평가하였다.

• 한국연소학회지
• /
• 제16권3호
• /
• pp.27-32
• /
• 2011

This study has numerically investigated the flame structure and emission characteristics in the metal fiber burner. The one-dimensional premixed flame approach has been adopted to simulate the combustion processes of the metal fiber burner. Numerical results indicate that the present approach is capable of predicting the essential combustion characteristics of the metal fiber burner. Based on numerical results, the detailed discussion has been made for the effects of equivalence ratio and thermal load on the precise flame structure and the pollutant emission in the metal fiber burner.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.13-18
• /
• 2006

Radiant burners are applicable to drying, preheating and curing in materials manufacturing processes. High radiation efficiency is one of the most important performance criteria for these burners. The wide variation in reported radiation efficiencies are partly due to the differences in the measurement techniques. In the present work, water cooled radiant heat flux meter was used to measure radiant heat flux from a metal fiber mat burner. Non-contact type thermometer was also utilized to measure the surface temperature of the burner. Combustion gas was measured by gas analyzers. According to the thermal loads and stoichiometric ratios, radiant heat transfer ratio and combustion performance were discussed here in.

• 한국연소학회지
• /
• 제11권1호
• /
• pp.27-33
• /
• 2006

Radiant burners are applicable to drying, preheating and curing in materials manufacturing processes. Radiation efficiency is one of the important performance criteria for these burners. The wide variation in reported radiation efficiencies are partly due to the differences in the measurement techniques. In the present work, water cooled radiant heat flux meter was used to measure radiant heat flux from a metal fiber mat burner. Non-contact type thermometer was also utilized to measure the surface temperature of the burner. Combustion gas was measured by gas analyzers. According to the thermal loads and stoichiometric ratios, radiant heat transfer ratio and combustion performance were discussed here in.