• 제목/요약/키워드: 메탄흡장

검색결과 3건 처리시간 0.019초

표면개질 된 활성탄의 메탄흡장 특성 (Characteristics of methane sorption in surface modified activated carbon)

  • 윤석민;김주완;조원준;김영호;이영석
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.73-76
    • /
    • 2007
  • In this study, methane gas adsorption ability of activated carbon (AC) with surface functional group effect, adsorbed methane amount was evaluated after nitric acid and ureatreatment of AC surface. Specific surface area and pore distribution of AC were studied though nitrogen adsorption isotherm at 77 K. Micro pore volume was calculated through H-K method. Adsorbed methane amount was evaluated through volume method at room temperature by using auto adsorption apparatus. Adsorbed methane amount of AC was found to increase with to specific surface area increase.Correlation proposed between the methane adsorption amount and surface nature indicates that the surface nature plays an important role on the adsorption amount at a given temperature.

  • PDF

CNG 버스용 NGOC/LNT 촉매의 CH4와 NOx의 동시 저감 (Simultaneous Reduction of CH4 and NOx of NGOC/LNT Catalysts for CNG buses)

  • 서충길
    • 한국산학기술학회논문지
    • /
    • 제19권6호
    • /
    • pp.167-175
    • /
    • 2018
  • 천연 가스는 공기 오염 물질을 거의 배출하지 않는 깨끗한 연료입니다. 이 연구의 목적은 CNG 버스용 NGOC/LNT(천연가스산화촉매/질소산화물흡장)촉매의 메탄과 질소산화물 동시 저감에 관한 연구로 메탄과 질소산화물 저감 성능 개선과 관련하여 조촉매, washcoat 담지량, 교반 시간 및 담체 종류에 대해 주로 초점을 두었다. 더구나, 니켈은 알칼리성의 독성 산화물이고 메탄에 영향을 미치는 효과가 있기 때문에, 3 wt% 니켈이 담지된 천연가스산화촉매는 일반적으로 메탄 전환율을 통해 우수한 메탄 감소 성능을 나타낸다. 담체에 담지량이 적으면 유해 가스의 흡장량이 충분치 않고 워시 코트가 너무 많이 담지되면 담체의 셀이 막히게 되었다. 촉매의 경제적을 고려할 때 촉매에 담지되는 양은 124g/L가 적절하다. 물질마다 5시간 동안 교반된 NGOC/LNT 촉매의 200에서 550도 까지 NOx 전환율은 2시간 동안 교반된 NGOC/LNT 촉매보다 전체 온도 범위에서 10-15% 우수한 성능을 보였다. 세라믹 담체의 NGOC/LNT 촉매는 메탈 담체보다 약 20% 수준의 높은 메탄 저감 성능을 나타냈다.

활성탄의 표면처리에 의한 천연가스 흡장 (Natural Gas Sorption Using Activated-Carbon with Surface Treatment)

  • 윤석민;김주완;임지선;김신동;홍지숙;서정권;이영석
    • 한국수소및신에너지학회논문집
    • /
    • 제17권4호
    • /
    • pp.434-439
    • /
    • 2006
  • In this study, activated carbon(ACs) have been modified by nitric acid and heat-treatment. The surface and structure properties of ACs were determined by BET surface area, FT-IR pH and acid/base value. The changes in pore structure and surface properties of these modified ACs were correlated with natural gas adsorption which measured by volumetric apparatus at $0^{\circ}C$ and $25^{\circ}C$. The pore textural properties of activated carbon was also characterized by nitrogen adsorption at 77 K. Specific surface area and micropore volume of them were calculated by Langmuir equation and Horvath-Kawazoe method, and chemical properties of surface were measured by FT-IR and titration of acid and base solutions. Pore texture of activated carbons after treatments were not significantly changed. Total acidity increased and basicity of samples decreased. however the basicity increased with heat treatment. The methane adsorption of ACs become different depending on the acid/base value of samples.