• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.6
• /
• pp.265-278
• /
• 2013

With the recent advancements in various wireless communication technologies, the importance of mobile multicasting is coming to the fore, in an effort to use network resources more efficiently. In the past, when various mobile IP-based multicast techniques were proposed, the focus was put on the costs needed for network delivery for providing multicast services, as well as on minimizing the multicast handover delay. For techniques using MIPv6 (Mobile IPv6), a host-based mobility management protocol, however, it is fundamentally difficult to resolve the problems of handover delay and tunnel convergence. To resolve these problems, a network-based mobility management protocol called PMIPv6 (Proxy Mobile IPv6) was standardized. Although performance is improved in PMIPv6 over MIPv6, it still suffers from the problems of handover delay and tunnel convergence. In this paper, to overcome these limitations, a technique called LFH (Low-cost and Fast Handoff) is proposed for fast and low-cost mobility management with multicasting support in PMIPv6 networks. To reduce the interactions between the complex multicast routing protocol and the multicast messages, a simplified proxy method called MLD (Multicast Listener Discovery) is implemented and modified. Furthermore, a TCR (Tunnel Combination and Reconstruction) algorithm was used in the multicast handover procedure within the LMA (Local Mobility Anchor) domain, as well as in the multicast handover procedure between domains, in order to overcome the problem of tunnel convergence. As a result, it was found that LFH has reduced multicast delay compared to other types of multicast techniques, and that it requires lower costs as well.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.99-104
• /
• 2012

The United States will proceed with the effort to modernize the GPS system, and one of its main content is to provide L5 signal. L5 will be transmitted in a radio band reserved exclusively for aviation safety services. And, L5, in combination with L1, will improve the position accuracy via ionospheric correction and robustness via signal redundancy. However, The acquisition processing time of L5 takes longer than that of L1 as the code length of L5 is 10 times longer than that of L1. To reduce this acquisition processing time, a higher number of correlators in the aquisition module should be used. However, there is a problem that this causes increase in the complexity of the correlator configuration and the computation power. So, in this paper, we propose L5 signal tracking scheme using tracking results in the GPS L1/L5 receiver. The proposed scheme could reduce the hardware complexity as the GPS L5 signal acquisition module is not needed, and provide fast and stable tracking of L5 signal by aiding L1 tracking results such as PRN, the code phase synchronization, and the Doppler frequency. The feasibility of the proposed scheme is demonstrated through simulation results.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.583-594
• /
• 2002

Assuring the security of group communications such as tole-conference and software distribution requires a common group key be shared among the legal members in a secure manner. Especially for large groups with frequent membership change, efficient rekey mechanism is essential for scalability. One of the most popular ways to provide sealable rekey is to partition the group into several subgroups. In this paper, we propose a two-layered key management scheme which combines DEP and CBT, a protocol in which subgroup manager cannot access the multicast data and another that has a multi-core, respectively. We also select sub-group key management protocols suitable for our structure and design new rekey protocols to exclude the subgroup managers from the multicast data. Compared to previous protocols based on CBT, our scheme provides forward secrecy, backward secrecy and scalability. This would reduce the number of encryption and decryption for a rekey message and would improve the efficiency number of rekey messages and the amount of information related to group members that group managers must maintain compared to DEP.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.131-146
• /
• 2004

As Electronic Commerce(EC) has been emerged and has developed, many researchers have tried to establish EC framework for automated contract and negotiation using agent technologies. Traditional researches, however, often had limitations. They often enforced the user's participations during the automated contract process of agents. They also could only consider a few of the user's requirements for a specific goods and did not have supported the procedures and methodologies for making the best contract. In this paper, we propose business model on EC based on multiagents to overcome the defects of the previous researches. We apply CSP techniques to brokerage process to satisfy various preferential requirements from the user. We also propose efficient negotiation mechanism using negotiation model of game theory. The contract candidates automatically negotiate and mediate in terms of their benefits through the proposed negotiation mechanism. For the optimal brokerage and automated negotiation, the agents process activities for contract on three layers, which are called competition layer, constraint satisfaction layer and negotiation layer in the proposed model. We also design the message driven communication protocol to support the automated contract among the agents. Finally, we have implemented prototype systems applying the proposed model and have shown the various experimental results for efficiency of the proposed model.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.48-52
• /
• 2007

Recently, the research of GPS receiver which uses the Software-Defined Radio(SDR) technique is being actively proceeded instead of traditional hardware-based receiver. The software-based GPS receiver indicates that the signal acquisition and tracking treated by the hardware-based platform are processed as the software technique through a microprocessor. In this paper, GPS software receiver is designed by using SDR technique and then the signal acquisition, tracking, and the navigation message decoding parts are verified through the PC-based simulation. Moreover, the efficient algorithms are developed about the signal acquisition and tracking parts in order to obtain the accurate pseudorange. Finally, the pseudorange is calculated through the relative channel delay received through the different satellite of L1 frequency band. GPS software receiver proposed in this paper will be included in the element of GPS/Galileo complex system of development target and will provide not only the method that verifies the performance for Galileo Sensor Station standard but also usability by providing various debugging environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1583-1594
• /
• 2001

In this paper, the transmission structure and procedure of a random access channel for the IMT-2000 satellite radio specification are presented. The proposed random access method has much commonality with that of the 3GPP FD specification which is a terrestrial radio interface of IMT-2000. The proposed method was designed by considering characteristics of satellite link as we71 as the commonality with the terrestrial component. A preamble consists of sub-preamble repetition and a message is transmitted along with the preamble successively. The propose method has fast indication of preamble acquisition by physical layer. The proposed method has been included in the SAT-CDMA which is a radio transmission technology Proposed by TTA, KOREA and approved as a satellite radio interface at ITU-R. Additionally, in this Paper the signaling delay for the proposed random access channel will be analyzed and it will be compared to that of the random access methods using a conventional ALOHA procedure and the 3GPP procedure in aspect of the signaling delay. When the SAT-CDMA satellite constellation at the height of about 1600 km is considered, the delay of the proposed method was estimated to 100 ms less than that of the conventional ALOHA. This delay difference increases with 7he number of retransmissions. The delay is reduced by 30 ms, compared with the 3GPP method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1444-1455
• /
• 1999

In the standard location strategy such as IS-41 and GSM, Home Location Register(HLR) and Visitor Location Register(VLR) databases are used to manage the location of mobile terminals. The primary goal that location management schemes investigate is to reduce the cost of database access and the traffic for signaling network. When mobile terminals move frequently, one of problems in the standard location management scheme is that HLR database is highly updated and the traffic in signaling network can be occurred significantly due to high message transfer rate between HRL and VLR. As a solution to these problems, this paper proposes the location management scheme using VLR Gateway(VG) to reduce the both traffics of HLR update and signaling network which are resulted from location registration requirements of mobile terminals whenever they cross their registration area boundary. VG is a kind of database that is placed between HLR and VLR. It integrates one or more registration area defined in a system into one group and plays a role on behalf of HLR in a integrated registration scope so that the call delivery and the movement of mobile terminals are possible without HLR access in the scope. In order to evaluate performance of IS-41 and proposed scheme, we simulate two schemes based on wide range of call to mobility ratio. Its experiment result shows that in the proposed scheme total database cost increased slightly whereas HLR and signaling traffic decreased remarkably.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.115-122
• /
• 2017

Recently, the on-board equipments of vessels are getting diversifications with high technologies. With changing the trends, the shipboard network is turning to the light-weight ethernet architecture for integrated data management. For that necessity, this paper covers a development of the gateway system which gathers and processes the measured analog or NMEA data from loaded equipments to convert the messages based on IEC 61162-450 (standard for light-weight ethernet network of ships) in engine parts of small vessel. To do this, we analyzed the requirements for standardization of ship's equipments and related studies. To solve the problems of existing equipments, we defined the additional data formats (sentence formatter), developed the gateway system, and verified the utility of the developed system. Consequently, we established an interfacing framework for management and application of the generated data based on the ethernet in vessel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1060-1073
• /
• 2013

In this paper, we present a cluster-based routing scheme for efficiently delivering data to group mobile users by extracting and clustering mobile user group simply from beacon message information in wireless ad-hoc networks. First, we propose an online-clustering mechanism that uses a local neighbor table on each node by recursively transmitting to neighbor nodes, and forms a group table where a set of listed nodes are classified as group members, without incurring much overhead. A node that appears the most frequently from neighbor tables throughout the network is selected as the cluster-head node, serving as a data gateway for the intra-cluster. Second, we design an inter-cluster routing that delivers data from stationary data sources to the selected cluster-head node, and a intra-cluster routing to deliver from the cluster-head node to users. Simulation results based on ns-2 in the ad-hoc networks consisting of 518 stationary nodes and 20 mobile nodes show that our proposed clustering mechanism achieves high clustering accuracy of 96 % on average. Regarding routing performance, our cluster-based routing scheme outperforms a naive one-to-one routing scheme without any clustering by reducing routing cost up to 1/20. Also, our intra-cluster routing utilizing a selected cluster-head node reduces routing cost in half as opposed to a counterpart of the intra-cluster routing through a randomly-selected internal group member.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.88-96
• /
• 2011

Underwater acoustic communication is applicable in various areas, such as ocean data collection, undersea exploration and development, tactical surveillance, etc. Thus, robot control system construction used for underwater-robot like AUV or ROV is essential in these areas. In this paper, we propose the Message Merging MAC($M^2$-MAC) protocol, which is suitable for real time robot control system, considering energy efficiency in important parts of underwater acoustic sensor network constitution. In this proposed MAC protocol, gateway node receives the data from robot nodes according to the time slots that were allotted previously. And messages delivered from base-station are generated to one MAC frame by buffering process. Finally, generated MAC frames are broadcasted to all robot nodes in the cluster. Our suggested MAC protocol can also be hybrid MAC protocol, which is successful blend of contention based and contention-free based protocol through relevant procedure with Maintenance&Sleep (M&S) period, when new nodes join and leave as an orphan. We propose mathematical analysis model concerned about End-to-End delay and energy consumption, which is important factor in constructing real-time robot control system. We also verify the excellence of performance according to comparison of existing MAC protocols with our scheme.