• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.761-768
• /
• 2010

This paper presents an effective method to achieve the wideband waveform for high resolution SAR(Synthetic Aperture Radar) using the frequency multiplication technique. And also this paper analyzes the root causes for the spectral regrowth due to 3rd-order intermodulation in chirp bandwidth expansion scheme using quadrature modulator and frequency multipliers. The amplitude and phase imbalance requirement are defined based on the simulation results in terms of quadrature channel imbalance. This minimizes the degradation of range resolution, peak sidelobe ratio and integrated sidelobe ratio. The wideband chirp generator using the frequency multiplier and memory map scheme was manufactured and the compensation technique was presented to reduce the spectral regrowth of SAR waveform by minimizing the amplitude and phase imbalance. After I and Q channel imbalance adjustment, the carrier level reduces －28.7 dBm to －53.4 dBm. Chirp signal with 150 MHz bandwidth at S-band expands to 600 MHz bandwidth at X-band. The sidelobe levels are reduced by about 8 to 9 dB by compensating the amplitude balance between I and Q channels.

• The KIPS Transactions:PartA
• /
• v.19A no.3
• /
• pp.129-138
• /
• 2012

In distributed memory architectures like clusters, each node stores a portion of data. How data is distributed across nodes influences the performance of such systems. The data distribution scheme is the strategy to distribute data across nodes and realize parallel data processing. Due to various reasons such as maintenance, scale up, upgrade, etc., the performance of nodes in a cluster can often become non-identical. In such clusters, data distribution without considering performance cannot efficiently distribute data on nodes. In this paper, we propose a new data distribution scheme based on the number of cores in nodes. We use the number of cores as the performance factor. In our data distribution scheme, each node is allocated an amount of data proportional to the number of cores in it. We implement our data distribution scheme using the Chapel language. To show our data distribution is effective in reducing the execution time of parallel applications, we implement Mandelbrot Set and ${\pi}$-Calculation programs with our data distribution scheme, and compare the execution times on a cluster. Based on experimental results on clusters of 8-core and 16-core nodes, we demonstrate that data distribution based on the number of cores can contribute to a reduction in the execution times of parallel programs on clusters.

• The KIPS Transactions:PartA
• /
• v.19A no.3
• /
• pp.139-146
• /
• 2012

In the server cluster environment, one of the ways saving energy is to control server's power according to traffic conditions. This is to determine the ON/OFF state of servers according to energy usage of data center and each server. To do this, we need a way to estimate each server's energy. In this paper, we use a software-based power consumption estimation model because it is more efficient than the hardware model using power meter in terms of energy and cost. The traditional software-based power consumption estimation model has a drawback in that it doesn't know well the computing status of servers because it uses only the idle status field of CPU. Therefore it doesn't estimate consumption power effectively. In this paper, we present a CPU field based power consumption estimation model to estimate more accurate than the two traditional models (CPU/Disk/Memory utilization based power consumption estimation model and CPU idle utilization based power consumption estimation model) by using the various status fields of CPU to get the CPU status of servers and the overall status of system. We performed experiments using 2 PCs and compared the power consumption estimated by the power consumption model (software) with that measured by the power meter (hardware). The experimental results show that the traditional model has about 8-15% average error rate but our proposed model has about 2% average error rate.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2017

In radio astronomy, high-capacity HDDs are being used to save huge amounts of HDDs in order to record the observational data. For VLBI observations, observational speeds increase and huge amounts of observational data must be stored as they expand to broadband. As the HDD is frequently used, the number of failures occurred, and then it takes a lot of time to recover it. In addition, if a failed HDD is continuously used, observational data loss occurs. And it costs a lot of money to buy a new HDD. In this study, we developed the integrity verification system of the Serial ATA HDD using FirmOS. The FirmOS is an OS that has been developed to function exclusively for specific purposes on a system having a general server board and CPU. The developed system performs the process of writing and reading specific patterns of data in a physical area of the SATA HDD based on a FirmOS. In addition, we introduced a method to investigate the integrity of HDD integrity by comparing it with the stored pattern data from the HDD controller. Using the developed system, it was easy to determine whether the disk pack used in VLBI observations has error or not, and it is very useful to improve the observation efficiency. This paper introduces the detail for the design, configuration, testing, etc. of the SATA HDD integrity verification system developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.36-43
• /
• 2005

This paper suggests a method to effectively apply an application model of fuzzy-neural network to the optimal load distribution algorithm, considering the complication and non-linearity of the web server environment. We use the clustering web server in the linux system and it consists of a load balancer that distributes the network loads and some of real servers that processes the load and responses to the client. The previous works considered only with the scrappy decision information such as the connections. That is, since the distribution algorithm depends on the input of the whole network throughput, it was proved inefficient in terms of performance improvement of the web server. With the proposed algorithm, it monitors the whole states of both network input and output. Then, it infers CPU and memory states of each real server and effectively distributes the requests of the clients. In this paper, the proposed model is compared with the previous method through simulations and we analysis the results to develop the optimal and intelligent load balancing model.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.563-577
• /
• 2006

A stream processor uses resource sharing method for efficient of limited resource in multiple continuous queries. The previous methods process aggregate queries to consist the level structure. So insert operation needs to reconstruct cost of the level structure. Also a search operation needs to search cost of aggregation information in each size of sliding windows. Therefore this paper uses linear structure for optimization of sliding window aggregations. The method comprises of making decision, generation and deletion of panes in sequence. The decision phase determines optimum pane size for holding accurate aggregate information. The generation phase stores aggregate information of data per pane from stream buffer. At the deletion phase, panes are deleted that are no longer used. The proposed method uses resources less than the method where level structures were used as data structures as it uses linear data format. The input cost of aggregate information is saved by calculating only pane size of data though numerous stream data is arrived, and the search cost of aggregate information is also saved by linear searching though those sliding window size is different each other. In experiment, the proposed method has low usage of memory and the speed of query processing is increased.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.113-124
• /
• 2009

With increasing multicore system, much effort has been put on the performance improvement of its application. Because multicore system has multiple processing devices in one system, its processing power increases compared to the single core system. However in many cases the advantages of multicore can not be exploited fully because the existing software and hardware were designed to be suitable for single core. When the existing software runs on multicore, its performance improvement is limited by the bottleneck of sharing resources and the inefficient use of cache memory on multicore. Therefore, according as the number of core increases, it doesn't show performance improvement and shows performance drop in the worst case. In this paper we propose a method of performance improvement of multicore system by applying Flow-Level Parallelism to the existing TCP/IP network application and operating system. The proposed method sets up the execution environment so that each core unit operates independently as much as possible in network application, TCP/IP stack on operating system, device driver, and network interface. Moreover it distributes network traffics to each core unit through L2 switch. The proposed method allows to minimize the sharing of application data, data structure, socket, device driver, and network interface between each core. Also it allows to minimize the competition among cores to take resources and increase the hit ratio of cache. We implemented the proposed methods with 8 core system and performed experiment. Experimental results show that network access speed and bandwidth increase linearly according to the number of core.

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.211-223
• /
• 2001

본 논문에서 제안하는 시나리오기반 검증기법의 목적은 UML로 작성된 객체지향 분석모델의 완전성 및 일관성을 진단하는 것이다. 검증기법의 전체 절차는 요구분석을 위한 Use Case 모델링 과정에서 생성되는 Use Case 시나리오와 UML 분석모델로부터 역공학적 방법으로 도출된 객체행위 시나리오와의 상호참조과정 및 시나리오 정보트리 추적과정을 이용하여 단계적으로 수행된다. 본 검증절차를 위하여 우선, UML로 작성된 객체지향 분석모델들은 우선 정형명세언어를 사용하여 Use Case 정형명세로 변환하다. 그 다음에, Use Case 정형명세로부터 해당 Use Case 내의 객체의 정적구조를 표현하는 시나리오 정보트리를 구축하고, Use Case 정형명세 내에 포함되어 있는 객체 동적행위 정보인 메시지 순차에 따라 개별 시나리오흐름을 시나리오 정보트리에 표현한다. 마지막으로 시나리오 정보트리 추적과 시나리오 정보 테이블 참조과정을 중심으로 완전성 및 일관성 검증작업을 수행한다. 즉, 검증하고자 하는 해당 Use Case의 시나리오 정보트리를 이용한 시나리오 추적과정을 통해 생성되는 객체행위 시나리오와 요구분석 과정에서 도출되는 Use Case 시나리오와의 일치여부를 조사하여 분석모델과 사용자 요구사양과의 완전성을 검사한다. 그리고, 시나리오 추적과정을 통해 수집되는 시나리오 관련종보들을 가지고 시나리오 정보 테이블을 작성한 후, 분석과정에서 작성된 클래스 관련정보들의 시나리오 포함 여부를 확인하여 분석모델의 일관성을 검사한다. 한편, 본 논문에서 제안하는 검증기법의 효용성을 증명하기 위해 대학의 수강등록시스템 개발을 위해 UML을 이용해 작성된 분석모델을 특정한 사례로써 적용하여 보았다. 프로세싱 오버헤드 및 메모리와 대역폭 요구량 측면에서 MARS 모델보다 유리함을 알 수 있었다.과는 본 논문에서 제안된 프리페칭 기법이 효율적으로 peak bandwidth를 줄일 수 있다는 것을 나타낸다.ore complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.348-359
• /
• 2000

Most of the important real time multimedia applications require multipoint transmissions. To support these applications in ATM based Intermet environments, it is important to provide efficient IP multicast transportations over ATM networks. IETF proposed MARS(Multicast Address Resolution Server) as the service architecture to transport connectionless IP multicast flows over connection oriented ATM VCs. MARS assumes UNI3.0/3.1 signalling. Since UNI3.0/3.1 does not provide any means for receivers to request a join for a multicast ATM VC, MARS provides overlay service to relay join request from IP multicast group members to the sources of the multicast group. Later on, ATM Forum standardized UNI4.0 signalling which is provisioned with a new signalling mechanism called LIJ(Leaf Initiated Join). LIJ enables receivers to directly signal the source of an ATM VC to join. In this paper, we propose a new service architecture providing IP multicast flow transportation over ATM networks deploying UNI4.0 signalling. The proposed architecture is named UNI4MARS. It comprises service components same as those of the MARS. The main functionality provided by the UNI4MARS is to provide source information to the receivers so that the receivers may exploit LIJ to join multicast ATM VCs dynamically. The implementation overhead of UNI4MARS and that of MARS are compared by a course of simulations. The simulation results show that the UNI4MARS supports the dynamic IP multicast group changes more efficiently with respect to processing, memory and bandwidth overhead.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.13-30
• /
• 1997

Recent improvements of satellite remote sensing sensors which are represented by hyperspectral imaging sensors and high spatial resolution sensors provide a large amount of data, typically several hundred megabytes per one scene. Moreover, increasing information exchange via internet and information super-highway requires the developments of more active service systems for processing and analysing of remote sensing data in order to provide value-added products. In this sense, an advanced satellite data processing system is being developed to achive high performance in computing speed and efficieney in processing a huge volume of data, and to make possible network computing and easy improving, upgrading and managing of systems. JAVA internet programming language provides several advantages for developing software such as object-oriented programming, multi-threading and robust memory managent. Using these features, a satellite data processing system named as GeoPixel has been developing using JAVA language. The GeoPixel adopted newly developed techniques including object-pipe connect method between each process and multi-threading structure. In other words, this system has characteristics such as independent operating platform and efficient data processing by handling a huge volume of remote sensing data with robustness. In the evaluation of data processing capability, the satisfactory results were shown in utilizing computer resources(CPU and Memory) and processing speeds.