• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1631-1636
• /
• 2015

With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1122-1127
• /
• 2014

WLAN is affordability, flexibility, and ease of installation, use the smart device due to the dissemination and the AP (Access Point) to the simplification of the Office building, store, at school. Wi-Fi radio waves because it uses the medium of air transport to reach areas where security threats are always exposed to illegal AP installation, policy violations AP, packet monitoring, AP illegal access, external and service access, wireless network sharing, MAC address, such as a new security threat to steal. In this paper, signature-based of wireless intrusion detection system for Snort to suggest how to develop. The public can use hacking tools and conduct a mock hacking, Snort detects an attack of hacking tools to verify from experimental verification of the suitability of the thesis throughout.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.85-106
• /
• 2017

With the media's shift into the digital era in the 2000s, comic book publishers attempted a transition into the new medium by establishing a distribution structure using internet networks. But that effort shied from escaping the parallel-page reading structure of traditional comics. On the other hand, webtoons are showing divers changes by redesigning the structure of traditional sequential art media; they tend to separate and allot spaces according to the vertical scroll reading method of the internet browser and include animations, sound effects and background music. This trend is also in accordance with the preferences of modern readers. Modern society has complicated social structures with the development of various media; the public is therefore exposed to different stimuli and shows characteristics of differentiated perceptions. In other words, webtoons display more relevant and entertaining characteristics by inserting sounds and using moving texts and characters in specific frames, while traditional comics require an appreciation of withdrawal and immersion like other published media. Motions in webtoons are partially applied for dramatic tension or to create an effective expression of action. For example, hand-drawn animation is adopted to express motions by dividing motion images into many layers. Sounds are also utilized, such as background music with episode-related lyrics, melodies, ambient sounds and motion-related sound effects. In addition, webtoons provide readers with new amusement by giving tactile stimuli via the vibration of a smart phone. As stated above, the vertical direction, time-based nature of animation motions and tactile stimuli used in webtoons are differentiated from published comics. However, webtoons' utilization of innovative techniques hasn't yet reached its full potential. In addition to the fact that the software used for webtoon effects is operationally complex, this is a transitional phenomenon since there is still a lack of technical understanding of animation and sound application amongst the general public. For example, a sound might be programmed to play when a specific frame scrolls into view on the monitor, but the frame may be scrolled faster or slower than the author intended; in this case, sound can end before or after a reader sees the whole image. The motion of each frame is also programmed to start in a similar fashion. Therefore, a reader's scroll speed is related to the motion's speed. For this reason, motions might miss the intended timing and be unnatural because they are played out of context. Also, finished sound effects can disturb the concentration of readers. These problems come from a shortage of continuity; to solve these, naturally activated consecutive sounds or animations, like the simple rotation of joints when a character moves, is required.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.103-111
• /
• 2009

Moisture is one of the important design factors that affects to the changes of physical properties and air permeability in the composting matrix. This study examines the effects of moisture during the wetting and drying procedure on physical properties like bulk density, particle size, free air space and air permeability in the sawdust used as the bulking agent in composting process. During both procedures of wetting and drying of the water, with increasing moisture content, bulk density and particle size increased, but FAS decreased. In the range of near 40 to 60% moisture content on a wet basis, particle size and FAS in wetting procedure were larger and higher than those in drying procedure. During wetting procedure, pressure drop continuously decreased ranging from near 20 to 60% moisture content, despite of decreasing FAS as a consequence of increasing moisture, and then over the range of 60% moisture content, pressure drop rapidly increased to the saturated moisture condition while the pore space was filled with the water. On the other hand, during drying procedure, pressure drop decreased from the saturated condition to 40% moisture content. In the recommended range of 50 to 60% moisture content for composting operation, pressure drop in wetting procedure were lower than in drying procedure. For the enhancement of the air permeability in the composting matrix, the wetting procedure was proper than the drying procedure, and the optimum moisture content for the efficient composting operation was appeared to be near 60%.

• Archives of design research
• /
• v.14 no.3
• /
• pp.49-58
• /
• 2001

The communication designer in the multimedia age should have a consideration that the sound also can be an important expression element to transmit ones thought as well as the visual sense like color, shape and motion. As you already know, someones thought can be better understood when transmitted to others using the visual and auditory senses together than using the visual or auditory sense alone. The meeting of sight and hearing bases on the synesthesia. For example, low sound reminds a person of dark color and high sound usually reminds light color. And a percussion instrument reminds a person a circle and melody reminds a line. The visual and auditory senses In communication of the multimedia age should act as an independent expression element gotten out of the synchronizing that just serves simple sight and related sound at the same time. Interaction between sight and hearing arose a different emotion that cannot be happened just by one element alone. So, the programs of communication design education in this multimedia age should fulfill the requirement that it can develop ones expression ability through the understanding of interaction between sight and hearing. In this study, we suggest the education programs Classified into following categories; audio visual Gestaltung, audio visual moving graphics, audio visual design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.133-133
• /
• 2023

풍화작용에 의해 생성된 유사는 자연 매체에 의해 이동하고 하천에 도달하기 이전이나 이후 퇴적되며, 해당 과정 중에서 하상변동, 홍수위 상승, 제방 안정성, 두부 침식, 생태환경 변화, 수질문제 등 다양한 침식과 퇴적 관련 문제들이 발생한다. 이러한 유사 문제의 해결과 지속적인 하천관리를 위해서는 유사의 생성, 이송, 그리고 퇴적 과정에 대한 충분한 이해와 정량적인 유사량을 파악하는 것이 필수적이다. 다양한 연구들을 통해서 유사량을 정량적으로 파악하기 위해 여러 종류의 모델과 공식들이 제안 되어져 왔다. 그 중 경험적 모델의 경우 실제로 관측된 값을 기반으로 하며, 복잡한 계산이나 요구하는 자료가 다른 종류의 모델들 보다 적어 쉽게 접근이 가능하다. 이러한 경험적 모델은 유사에 영향을 주는 인자를 규명하거나 특정 유역이나 지역에서 이송 및 퇴적 되는 유사의 출처와 특성을 규명하는 초기 단계에서 유용하게 이용된다. 국내 하천의 경우 여름에 강우가 집중되고 대부분의 국토가 산지로 이루어져있어 상류에서 침식이 주로 발생한다. 또한, 본류 및 하류 지역의 하천은 유사의 퇴적이 주로 일어나서 하천의 형태와 물길이 형성된 충적 하천 형태로 발전 되어있기 때문에 국내 하천에서는 전반적으로 국부적이며 다양한 형태의 유사 관련 문제가 발생한다. 국내 하천에서 발생하는 유사 관련 문제를 해결하기 위해 국내 하천의 유사량을 추정하는 다양한 경험적 모델들이 지속적으로 개발되어왔다. 하지만 과거에 개발된 모델들의 경우 계측 자료가 충분하지 않은 시기에 개발 되었으며, 현재에는 활용하기 불가능하다. 본 연구에서는 국내 하천의 비유사량을 예측하는 동시에 국내 하천의 유사 특성을 이해하기 위해 과거에 국내 하천을 대상으로 비유사량을 추정하기 위해 개발되었던 경험적 모델을 개선하였다. 본 연구를 통해 기존 경험 모델의 경우 주기적인 업데이트가 필요함을 확인하였으며, 개발된 모델의 경우 국내 하천 유사 관리를 위해 미래 유사량 예측하는 등 다양한 방면으로 활용 관리가 가능할 것으로 보인다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.157-164
• /
• 2008

In order to raise efficiency in construction, construction period, construction costs etc. that have been problematic in the methods of hydration heat reduction thus far, this study has developed a new method. The principle of the developed construction method involves the laying of a heat conducting medium such as the heat pipe in the concrete, and through the fast conduction of heat by the heat pipe, the hydration heat occurring within the mass concrete is transferred to the exterior by which the internal hydration heat is reduced. If the study results of the onsite test are summarized, on application of existing hydration heat reduction methods, the highest temperature was reached in about 2$\sim$4 days, but when the heat pipe of this study was used, the period was reduced to within 24 hours. Moreover, when the thermal crack index was calculated with the method using the heat pipe as developed in this study, a value of 1.2 or higher was revealed, which is a level that can restrict the occurrence of cracks. Therefore, when the hydration heat control method using the heat pipe as developed in this study is applied, not only the effects of construction efficiency and reduction in construction period, but also outstanding economical effects can be expected.

• Information Systems Review
• /
• v.7 no.1
• /
• pp.153-171
• /
• 2005

As the mobile telecommunications industry in Korea boasts record-high revenue from its businesses, consumers and other industries are looking for new business applications and opportunities using mobile technologies. Many firms are seeking guidelines or business models for an effective use of this new mobile technology in their operations. This paper reviews the characteristics that distinguish mobile marketing, and analyzes marketing approaches which utilize the potential of the new mobile technologies. This paper shows that the new mobile advertising channel is not only complementary to traditional marketing channels, but also delivers benefits for multiple parties involved in mobile marketing. The key success factors in the new OB (Oriental Brewery) marketing campaign include a shortening of the stages in the AIDMA model and a broadening of customer contact points by exposing the brand through well-coordinated marketing efforts. The OB case shows that a mutually beneficial relationship between co-marketing participants can lead to a win-win marketing strategy. It also highlights that collaborative channel management in mobile marketing methodology is critical for successful mobile marketing.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.4
• /
• pp.179-207
• /
• 2011

This study was conducted by surveying users' perception about the public libraries' current public relations, which can contribute to developing the most appropriate public relations strategies for persons with disabilities(PWDs). This study concluded, first, PWDs' experience with the PR of the library services was a very low 32.4%. Intellectual disabilities, especially, were reported to have no experience in public relations. Second, the library public relations media which PWDs utilized the most were the Internet, library bulletin boards, banners, ARS services, and podcasting, in that order. However, satisfaction with promotions appeared below average(3 points or less). On the other hand, interest in public relations media was very high. Third, it appeared that library users with disabilities most frequently use the websites of their school library, the National Library of Korea, and public libraries in that order. However, the usage rate of services and users' satisfaction with them were very low. Finally, a high demand for facilities with accessibility to PWD users emerged as a result of this study. Therefore, this study recommends greater accessibility, convenience, and ease of facility use for persons with disabilities.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.201-213
• /
• 2017

Water is removed from crude oil containing water by using oil separator. This study aims to develop a three-dimensional (3D) Eulerian computational fluid dynamics (CFD) model to predict the separation efficiency of air-water-oil separator. In the incompressible, isothermal and unsteady-state CFD model, air is defined as continuous phase, and water and oil are given as dispersed phase. The momentum equation includes the drag force, lift force and resistance force of porous media. The standard k-${\varepsilon}$ model is used for turbulence flow. The exit pressures of water and oil play an important role in determining the liquid level of the oil separator. The exit pressures were identified to be 6.3 kPa and 5.1 kPa for water and oil, respectively, to keep a liquid level of 25 cm at a normal operating condition. The time evolution of volume fractions of air, water and oil was investigated. The settling velocities of water and oil along the longitudinal separator distance were analyzed, when the oil separator reached a steady-state. The oil separation efficiency obtained from the CFD model was 99.85%, which agreed well with experimental data. The relatively simple CFD model can be used for the modification of oil separator structure and finding optimal operating conditions.