• 동아시아식생활학회지
• /
• 제22권4호
• /
• pp.440-451
• /
• 2012

The purpose of this study was to provide basic information on nutrition education for proper meal purchase habits by conducting a survey on the adolescents' meal purchases, which is gradually increasing nowadays. The survey was conducted on 311 middle school students living in Gyeonggi province. The largest number of students (79.1%) received an allowance under '2,000 won'. Among those students who received a daily allowance, 70.7% of students spent under '1000 won' a day on meal purchases. Most students answered 'meal purchase is necessary'. Of the reasons for thinking that meal purchases are necessary, 'for staving off hunger' took the highest ratio (67.1%). As for standards of food choice, the largest number of students answered 'taste' (57.6%). As for frequency of meal purchases, most students answered 'once or twice a week', and with regard to day of the week, 'weekdays' took the highest ratio. As for possibility of balanced nutrition by meal purchases, the answer 'surely possible' took the highest ratio. Asked whether or not one had learned nutrition education on meal purchases, 73% answered 'no'. Asked about the necessity of nutrition education on meal purchases, 'necessary once' took the highest ratio. The most preferred purchase meals were breads, snacks was ranked second, followed by frozen foods, beverages, fast-foods, rice-cakes, flour-based foods, ice-cream, and fruits. To sum up the results, most students perceived that meal purchases are necessary. However, high quality meal purchases were not achieved, as most of the students did not verify nutrition labeling, and placed emphasis on 'taste'. Further, many students wanted nutrition education on meal purchases while only a few had actually received it. Therefore, systemic, regular, and multilateral nutrition education conducted at home, school, and society will contribute to establishing proper meal purchase habits.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.121-121
• /
• 2016

치아는 인체중에서도 혹한 환경에서 부분으로 높은 하중과 타액과 같은 강 부식성 매체로 그 환경이 상상을 초월한다. 즉 반복적으로 가해지는 하중(응력)과 침식을 유발하는 타액과 음식물 등이다. 따라서 치아가 쉽게 파괴되거나 썩는 현상이 나타나게 된다. 이렇게 사용되다가 치아의 역할을 다하게 되면 인공치아를 사용하게 되는데 그 재료가 바로 타이타늄(Ti)이다. 생체매식재로 사용되는 Ti는 반응성이 높아 산소와 쉽게 결합하여 표면에 TiO, $TiO_2$, 및 $Ti_2O_3$와 같은 산화피막을 표면에 형성함으로써 뛰어난 부식저항성과 생체적합성을 가지며 생체에 독성이 없고 탄성계수가 골과 비슷하여 골과 임플란트 경계면에서 응력분산에 유리한 성질 등 물리적, 기계적 성질이 뛰어나 외과용 임플란트 재료로 가장 좋은 재료이다. 금속 임플란트의 생체적합도는 임플란트 재료 자체보다는 생체 내 산화막이 화학적으로 불안정할 때 부식이 발생하게 되고 그 결과 금속이온이 주위로 유리되어 조직반응을 일으키므로 금속의 표면을 덮고 있는 산화막에 의해 좌우된다. Ti는 생체불활성재료로서 매식재료로 사용할 경우 뼈와 잘 융합되는 골유착을 나타내나 골과 화학적결합은 하지 않고 골형성을 적극적으로 유도하지 못함으로 환자의 치유기간이 길어지게 된다. 이러한 이유로 골조직내 임플란트의 접합을 개선하기위한 연구가 이루어져 골과의 결합을 높이기 위해 골유착을 일으키는 Ti에 골성장을 유도하는 뼈성분인 하이드록시 아파타이트(HA)라는 물질을 플라즈마 코팅법을 사용하던가 아니면 Hanks' solution내에서 침적 후 HA도금을 하는 방법 등으로 처리하고 있다. 그러나 플라즈마 코팅법은 고온에서 처리를 행하고 Hanks' solution내에 침적할 경우 Ti표면에 밀착도가 저하되거나 합금의 상변화 등으로 인하여 표면처리 과정 중에서 내식성이 크게 감소될 수 있다. 이러한 여러 가지 코팅법을 통하여 골 유착을 증진시키기 위한 연구는 계속되고 있지만 임상적으로 사용 후 문제가 단시일에 발생되는 것도 아니고 수년이 지나야 나타나게 된다. 이러한 방법으로 코팅을 하게 되면 골과 잘 유착이 되어 자연차아와 같은 기능을 하게 된다. 따라서 이러한 문제를 최소화하는 방법이 나노구조를 표면에 형성시켜 골유착을 쉽게 함으로써 이를 개선할 수 있을 것으로 생각되어 본 강의에서는 임플란트의 문제와 사용되는 재료에 대하여 고찰하여 자연치아를 대체 할 수 있는지 알아보았다.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.321-329
• /
• 2002

Bending moments results from offset overloading of dental implant, which may cause stress concentrations to exceed the physiological capacity of cortical bone and lead to various kinds of mechanical failures. The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different angulated placement of dental implant in mandibular posterior missing areas. The three kinds of finite element model, were designed according to 3 main configurations: Model 1(parallel typed placement of 2 fixtures), Model 2(15. distal angulated placement of one fixture on second molar area), Model 3(15. mesial angulated placement of one fixture on second molar area). The cemented crowns for mandibular first and second molars were made on the two fixtures (4mm 11.5). Three-dimensional finite element models by two fixtures were constructed with the components of the implant and surrounding bone. A 200N vertical static load were applied to the center of central fossa and the point 2mm apart from the center of central fossa on each model. The preprocessing, solving and postprocessing procedures were done by using FEM analysis software NISA/DISPLAY IV Version 10.0((Engineering Mechanics Research Corporation, USA). Von Mises stresses were evaluated and compared in the supporting bone, fixtures, and abutment. The results were as following : (1) Under the point loading at the central fossa, the direction of angulated fixture affected the stress pattern of implants. (2) Under the offset loading, the position of loading affected more on the stress concentration of implants compare to the angulated direction of implants. The results had a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the placement angulation of implant fixture is placed toward mesial or distal direction. In designing of the occlusal scheme for angulated placement, placing the occlusal contacts axially during chewing appears to have advantages in a biomechanical viewpoint.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.301-311
• /
• 2002

The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different vertical bone level of implant fixture. The two kinds of finite element models were designed according to vertical bone level around fixture ($4.0mm{\times}11.5mm$). The cemented crowns for mandibular first and second molars were made. Three- dimensional finite element model was created with the components of the implant and surrounding bone. Vertical loads were applied with force of 200N distributed within 0.5mm radius circle from the center of central fossa and distance 2mm and 4 mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the supporting bone, fixtures, abutment screws, and crown. The results were as following : (1) In vertical loading at the center circle of central fossa on model 1 and 2, the difference from vertical bone in implant placement did not affect the stress pattern on all components of implant except for crown. (2) With offset distance incerasing and the bone level of implant decreasing, the concentration of stress occured in the buccal side of long crown, around the buccal crestal bone, and on the fixture- abutment interface. As a conclusion, the research showed a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the vertical level of bone around fixture was different. Since the same vertical bone bed has more benefits than the different bone bed around fixtures, it is important to prepare a same vertical level of bone bed for the success of implants under occlusal loads.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권1호
• /
• pp.1-12
• /
• 1999

The purpose of this study was to evaluate the healing process of the calvarial defect filled with hydroxylapatite(HA) and $TGF-{\beta}$ in Rat. 72 Sprague-Dawly rats were divided into 3 groups, control and two experimental groups. Bony defect were artificially prepared in the calvaria of all 72 rats and followed by implantation of HA (experimental group of 24 rats) and HA+$TGF-{\beta}$(another experimental group of 24 rats) into the defects. Sequential sacrifice was performed at 1, 2, 4, 6, 8, 12 weeks of experiment. Obtained specimen was stained with Hematoxylin and Eosin, Masson's Trichrome and Immunohistochemistry. The results were as follows, 1. Granulation tissue was prominent on control group in 1 and 2 weeks. Bony defects were filled with dense fibrous tissue through the whole experimental period and osteoinduction could not be observed in all groups. 2. Inflammatory cell infiltration was prominent on control group in 1 and 2 weeks and osteoclastic activity was high in HA implanted experimental group at 1 and 2 weeks. 3. Inflammatory cell infiltration was less and maturation of fibrous tissue could be found on HA+$TGF-{\beta}$ implanted experimental group at 1 and 2 weeks. 4. Osteoconduction activity was high in HA+$TGF-{\beta}$ implanted experimental group at 2 and 4 weeks but there was no difference after 6 weeks among 3 groups. 5. In grafted site of HA+$TGF-{\beta}$ implanted group, osteonectin expression was slightly increased from 1 week to 6 weeks. In the host site, it was increased from 1 to 4weeks. 6. In grafted site of HA+$TGF-{\beta}$ implanted group, osteocalcin expression was high at 4 weeks. In the host site, we could find the difference among 3 groups. From above results, the HA with mixture of $TGF-{\beta}$ has the potentiality of promoting bone formation in the bony defect area in the rat.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권3호
• /
• pp.265-277
• /
• 1991

In this study, the healing changes of the implanted bone and its surrounding tissues were examined on the histopathologic basis following implantation of the freeze - dried and radiation - sterilized allogeneic bone in Rectus abdominicus of the rat. This study was performed to see the tissue recations after implantation of the freeze - dried and radiation - sterilized allogeneic bone and whether osteogenesis or osteo - induction or osteo - conduction is happened. And the results were as follows : 1. The shape of the implanted allogeneic bone of the 1, 2 - week group specimen was similar to that of normal bone in light - microscopic finding and the atrophy of cellular organells was found in trans - mission electron - microscopic finding. 2. The implanted allogeneic bone was surrounded with the dense fibroconnective tissues, and infiltration of the chronic inflammatory cells gradually became increased. 3. Hyaline degeneration was observed in the surrounding tissue at the 3, 4, 6 - week group specimen. 4. Light - microscopically the resorption of implanted bone became prominent after 4 - week group and the necrosis of allogeneic bone implant became severe with loss of cell components in lacuna. 5. Electron - microscopically, the osteoclast - like cells ere fond after, 2 - week group. It is summarized that the osteo - conduction potential of the bone is remained just after implanting the freeze - dried and radiation - sterilized allogeneic bone on Rectus abdominicus of the rat, but gradually it disappeared with the gradual increse of chronic inflammatory reaction and osteoclastic activity. So it is suggested that the antigenicity of the freeze - dried and radiation - sterilized bone is remained and it has little osteo - conductive activity when it is implanted in the muscle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권3호
• /
• pp.231-238
• /
• 1995

The scapular flap, described by dos Santos in 1986, has been used successfully for the reconstruction of a variety of defects of oro-mandible. Some have defined the gross and vascular anatomy of the lateral border of the scapula, yet useful anatomical information and a complete description of area and contour of each cut surface of lateral border of scapula, which is very important for esthetic and functional reconstruction using dental implants, are missing. These prompted us to clarify the cross-sectional area of lateral border of scapula. Twenty three scapulas of 15 fixed adult Caucasian cadavers were sectioned in every 1cm interval along the lateral border of scapular, and the metric relations and the shape of cut surface were assessed. The lateral border of the scapula, consisting of cortico-cancellous bone measuring $7.86{\pm}0.97mm$ in width, $19.6{\pm}2.86mm$ in height and $12{\pm}1.78cm$ in length, could be harvested as an osteocutaneous scapular flap or as a single vascularized bone flap. The mean thickness of cortical bone of lateral, medial, dorsal and costal surface was $0.46{\pm}1.48mm$, $1.78{\pm}1.34mm$, $1.54{\pm}1.11mm\;and\;1.35{\pm}0.87mm$, respectively. So we have thought that all scapular transplants could be supported osseointegrated implants for fixation of dental prosthesis.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.687-702
• /
• 2005

The purpose of this study is to examine the effect of non-resorbable membrane such as e-PTFE which was used with DFDB in bone regeneration on dehiscence defect in peri-implant area. Amomg the patients, who have recieved an implant surgery at the department of Periodontics in Dan Kook University Dental Hospital, 12 patients showed implant exposure due to the dehiscence defect and 15 implants of these 22 patients were the target of the treatment. Periodontists randomly applied $Gore-Tex^{(R)}$ to the patients and treated them with antibiotics for five days both preoperatively and postoperatively. Reentry period was 26 weeks on average in maxilla and 14 weeks on average in mandible. The results were as follows : 1. Dehiscence bone defect frequently appeared in premolar in mandible and anterior teeth in maxilla respectively. 2. Among 15 cases, 1 membrane exposure was observed and in this case, regenerated area was decreased. 3. In non-resorbable membrane, bone surface area $9.25{\pm}4.84$ preoperatively and significantly increased to $11.48{\pm}7.52$ postoperatively(0.05). 4. The increase of bone surface area in non-resorbable membrane was $2.23{\pm}3.38$. 5. As a result of histopathological finding, DFDB surrounded by new bone formation and lamellate bone, resorption of DFDB and bone mineralization was found. Also, fibrosis of connective tissue beneath the membrane was found. This study shows that the surgical method using DFDB and non-resorbable membrane on dehiscence defect in peri-implant area is effective in bone regeneration.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.573-592
• /
• 1994

A two-stage procedure is ideal for getting a successful osseointegration. But if a one-stage procedure can achieve a similar osseointegration, the one-stage procedure has several advantages. The purpose of this study was to observe the initial bone formation and bone remodeling of open type (nonsubmerged) and closed type (submerged) titanium implants. Eight ITI hollow-screws and eight Branemark fixtures were divided into two groups (submerged and nonsubmerged) and were installed on the lower jaws of four mongrel dogs. The animals were sacrificed three months later and bone sections with implants were processed for light microscopic and fluorescent microscopic observation. The results were as follows : 1 There was no significant difference in bone-to-implant contact between submerged and nonsubmerged implants. 2. Smooth surface titanium implants showed more bone-to-implant contact than that of titanium plasma coated implants histologically. 3. Under fluorescent microscopy, the active bone remodeling and new bone formation were observed in the interface zone. 4. Under fluorescent microscopy, submerged and nonsubmerged implants had no difference in bone remodeling pattern, and intramembranous bone formation was more prominent. 5. The connective tissue fibers orienting perpendicularly toward implant surface were oberved in the neck of implants.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.593-607
• /
• 1994

The purpose of this study is to evaluate the effect of the bone morphogenetic protein, bone matrix gelatin and collagen matrix on the amount and shape of generating new bone adjacent to the implant. Implants were inserted in the mandible of adult dogs at 2 months after teeth extraction. Artificial bony defects, 3mm in width and 4mm in depth were made at the mesial and distal side of implant. Experimental groups were divided into three groups ; Group 1 : Defects filled with collagen matrix and bone morphogenetic protein, Group 2 : Defects filled with bone matrix gelatin. Control group : Defects filled with only collagen matrix. After implantation, the animals were sacrificed at 1,3,5 and 10 weeks for light microscopic examination. For the fluorescent microscopic examination. each tertracycline Hcl and calcein were injected at 1, 3, 5, 8 and 10 weeks after implantation. The results obtained were as follows : 1. The molecular weight of bovine BMP was about 18,100 by hydroxyapatite chromatography. 2. Osseointegration was observed in experimental groups 1 & 2, and BMG and BMP had an excellent bone forming capability as a filling materials to the repair of the bone defects. 3. The degree of healing of bone defect area, the experimental group 1 showed more prominent bone formation than control group, and the control group showed fibrous connective tissue between the implant and the bone. 4. In the fluorescent microscopic findings, bone remodelling was observed regenerative lamellar bone at defect area in experimental group 1, and partial remodelling in experimental group 2, In the control group, fibrous connective tissue was observed between the implant and bone surface and sign of remodelling was not apperaed. Above results suggest that BMP has rapid osteoinductive property and can be used clinically as a bone substitute on bone defects around implants.