• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.260-263
• /
• 2005

The effects of internal manifold designs the reactant feed-stream in Polymer Electrolyte Fuel Cells (PEFCs) is studied to figure out mass flow-distribution patterns over an entire fuel cell stack domain. Reactants flows are modeled either laminar or turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-determined for computational analysis. In this work, numerical models for reactant feed-stream in the PEFC manifolds are classified into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain information on the optimal design and operation of a PEMC system.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.11-19
• /
• 2012

The main function of fuel cell manifold is to render reactants distribution as uniform as possible into a fuel cell stack. The purpose of this study is to numerically investigate the effects of stack manifold design on reactants distribution within a fuel cell stack. Four manifold designs with different manifold entrance shapes (expansion or diffuser) and different values of the extra width between the cell outer channel and manifold side wall are considered and applied to the fuel cell stack consisting of 50 cells. Since the fuel cell stack geometry involves several millions of grid points for numerical calculations, a parallel computing methodology is employed to substantially reduce the computational time and overcome the memory requirement. The numerical simulations are carried out and calculated results clearly demonstrate that both the manifold entrance shape and extra width have a substantial influence on manifold performance, controlling the degree of flow separation and entrance length for fully developed flow in the manifold channel. Finally, we suggest the optimum design of fuel cell manifold based on the simulation results.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.777-782
• /
• 2004

액상응결 공정법과 일축가압성형법으로 제조된 기판위에 전해질과 양극층을 스크린 인쇄법으로 구성한 후 열처리함으로써 최종크기가 $5\times5cm^2$인 SOFC 단전지를 제조하였다. 본 연구에서는 이들 단전지와 인코넬 합금으로 제조된 접속자 그리고 가스켓형의 밀봉재를 이용하여 스택을 구성하였다. 본 연구에 사용된 스택은 연료가스와 산화가스가 교차되는 형태의 가스채널을 가지며 가스매니폴드가 내부에 구성되어 있는 형태로 설계되었다. 제작된 3단 스택의 성능을 평가해 본격과 15W 정도의 최고출력을 나타내었는데 이는 단전지 출력성능으로부터 예측된 최고출력치의 $50\%$ 정도에 해당되는 출력이었다. 본 연구에서는 이러한 스택성능에 영향을 주는 조정인자들과 스택디자인 인자들에 대한 분석을 수행하였다.