• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.10a
• /
• pp.27-30
• /
• 2003

자망이나 삼중자망은 그물에 고기가 꽂히거나 얽히게 하여 어획하는 어법이다. 흐름이 있는 곳에서 어구는 저항을 받게 되고, 이에 따라 형성되는 어구 형상은 유속 세기와 부력 및 사용된 그물의 망지 길이(뻗친 높이)와 관련된다(장ㆍ서, 1982; 천상, 1981; 송전, 2001). 이때 자망의 높이는 어획 효율에 영향을 미치는 매우 중요한 요소이다. 저자망의 경우 뜸줄의 높이는 바다에서 다이버나 자기기록식 기록계에 의해 기록되거나 flume tank에서 여러 가지 망목크기와 길이 및 망사직경에 대해 조사된 바가 있다 (Matuda, 1988; Stewart, 1988). (중략)

• Electrical & Electronic Materials
• /
• v.7 no.3
• /
• pp.187-199
• /
• 1994

In order to find an effect of structural changes due to variation of addition ratio of anhydride hardener and postcuring herat-treatments upon electrical properties of epoxy composites, the dielectric properties over a frequency range from 30[Hz] to l[MHz] were investigated in the temperature range of 20-180[.deg. C]. From the dielectric properties, the a peaks related with glass-transition phenomena of epoxy network appeared near 130[.deg. C], the conduction loss in high temperature region above 150[.deg. C] due to thermal dissociation of hardener started off with the low frequency side and the .betha. peak concerned with contribution of movable unreacted terminal epoxy groups and curing agents in the glass states concurred with the high-frequency side below 20[.deg. C]. And an effect of an hydride hardener upon structural changes and of postcuring heat treatments upon structural stability in epoxy composites would be explained through the estimation of the distribution of relaxation times and the activation energy for a .alpha. peak according to the WLF equations.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.176-182
• /
• 2007

The present study relates to a matrix-typed, sustained-releasing agent comprising agrochemical effective ingredients being capable of recognizing a content of moisture, and a preparation method thereof. The curdlan solution added to acid was formed matrix which has unique network structure. The matrix treated by heat lost water solubility. The network structure of matrix was opened in the aquatic condition but closed again in dry condition. Therefore, in the sustained-releasing formulation system, an agrochemical effective ingredient was released from the formulation only in the aquatic condition. Use of the composition according to the product can control a manifesting time of effects of agrochemicals and can provide agrochemicals with reduced harmful damages.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2001

In the SP series of glasses, the formation of droplet is well done with increasing PbO. But in the case SP-1, droplet could not be observed in low concentration PbO. These results are considered that PbO does the role of a network modifier, so the crosslinking break down by $SiO_2$. But, in the glasses contained PbO above 50 mol%, glasses are formeddue to $Pb^{4+}$ ion does the role of a network former. As a result of electrical conductivity analysis for SP series of glasses, the electrical conduction is due to bipolaron at high temperature, and it is due to single polaron hopping at low temperature. In the SP series of glasses, electrical conduction mechanism coincide with the correlated-barrier hopping(CBH) model.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.158-165
• /
• 2001

고체산화물 연료전지용 밀봉재로서 전지 구성원과 열팽창계수가 유사하고 비젖음성 특성을 가지며 전지 작동온도에서 화학적 안정성을 갖는 밀봉유리를 개발하고자, BaO-Al$_2$O$_3$-La$_2$O$_3$-Ba$_2$O$_3$-SiO$_2$계 유리를 제조하여 조성 변화에 따른 열적 특성 변화와 접합후의 젖음성 및 반응성 등을 조사하였다. 유리망목 형성산화물인 B$_2$O$_3$와 SiO$_2$의 함량비 및 BaO의 망목 형성산화물(B$_2$O$_3$+SiO$_2$)에 대한 함량비 변화에 따른 유리의 열적 특성을 조사한 결과, 0.33~0.71의 B$_2$O$_3$/SiO$_2$함량비하에서 BaO/(B$_2$O$_3$+SiO$_2$)가 0.70일 때 유리의 열팽창계수는 106~111$\times$$10^{-7}$/K 이었으며 이때 연료전지 구성원인 YSZ(yttria stabilized zirconia)와의 열팽창 불일치(thermal expansion mismatch)가 가장 작았다. 또한 이러한 조성의 유리로부터 분말성형체를 제조하여 YSZ에 접합을 시도한 결과, 우수한 접합성 및 비젖음성을 확인할 수 있었으며, 800~8$50^{\circ}C$의 전지 작동온도에서 100시간까지 유지시에도 YSZ와의 계면반응이 일어나지 않음을 관찰할 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.213-213
• /
• 2003

저온소성 가능하며 저 융점유리인 고 투과율의 Pb-free 조성으로서 PDP(Plasma Display panel)의 투명유전체에 응용하고자 P$_2$O$_{5}$-ZnO-RO 계인 인산염 유리의 열적, 광학적성질을 연구하였다. 이 삼원계인 인산염유리계를 PDP의 투명 유전체에 응용하기에는 열적특성에서 문제점이 제기되어, (30-50)P$_2$O$_{5}$ - (20-50)ZnO - (15-45) RO (mol%)계에 유리망목형성제인 A1$_2$O$_3$, SiO$_2$, B$_2$O$_3$등을 첨가하여 열적성질 및 소성후 투광성 등을 조사하였다. 열적특성은 DTA와 TGA를 이용하여 유리전이점(Tg) 및 선팽 창계수(CTE)와 연하점(Ts) 을 측정하였으며, 투광성은 500-58$0^{\circ}C$에서 1시간동안 소성하여 UV-visible spectrometer을 이용하였다 그 결과로, 380-46$0^{\circ}C$의 Tg와 8-$10^{-6}$K의 CTE 및 70-80%의 광투과율을 나타내었다. 이러한 결과는 P$_2$O$_{5}$-ZnO-RO계는 PDP의 투명유전체에 적용하기에는 상당히 높거나 낮은 Tg를 형성하였지만 유리형성제를 수 mol%을 첨가함으로써 적절한 Tg점과 높은 투과율을 얻을 수 있었다.수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.27-31
• /
• 2002

Quarternary $Li_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Li_2Omole%/B_2O_3mole%)$ and $K({\equiv}(Al_2O_3mole%+SiO_2mole%/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and Vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Li_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network but, in the region of high $Li_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2003

Quarternary $Na_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Na_2O\;mole%/B_2O_3\;mole%)$ and $K({\equiv}(Al_2O_3\;mole%+SiO_2\;mole%)/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Na_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network, but in the region of high $Na_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.397-406
• /
• 2009

We have fabricated source-drain electrodes for OTFTs using a screen-printing technique with carbon-black pastes as conductive paste. And effects of dispersants contents (SOP 10-40%) on the dispersity of carbon-black pastes and characteristics of screen-printed source-drain electrodes for OTFTs using two types of dispersants (DB-2150, DB-9077) were investigated. As contents of both dispersants were increased the dispersity of carbon-black mill-bases was improved, whereas the carbon-black pastes exhibited different dispersion characteristics. For the case of DB-2150, the dispersity of the pastes was improved with increasing dispersant content and the storage modulus G' in their rheology characteristics were reduced. But, for the DB-9077, the storage modulus G' of pastes were increased with dispersant content due to the flocculated network structure formed by interactions among carbon-black powders and dispersants. But, since this flocculated network structure of the pastes using DB-9077 resulted in the conduction path of carbon-black structures, the conductivities of screen-printed electrodes and mobilities of the OTFTs with them were better than those using pastes with DB-2150.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.459-462
• /
• 2008

본 논문에서는 $10K_2O$-30CaO-$60P_2O_5$ mol%를 기본조성으로 하여 Fe, Cu, Zn의 미량성분을 첨가하여 유리를 제조하고 용출 특성을 평가 하였다. 제조된 유리는 미량성분의 첨가량에 따라 유리의 투명도가 변하는 것이 관찰되었다. 용출특성은 측정 4시간 뒤 pH값 증가되는 것으로 16시간 후 pH가 증가하는 것으로 관찰되었다. 여기서 pH의 증가는 염기성산화물이 용출되는 것으로, 감소는 $P_2O_5$구조인 망목형성구조가 붕괴되어지면서 산성이온이 용출되어지는 것으로 판단되어진다. ICP관찰시에는 함량이 증가하면서 K, Ca, P이온의 용출량이 감소되었고, Zn, Cu, Fe이온의 용출량이 증가하는 경향이 관찰되었다.