• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.61-68
• /
• 2010

Purpose: This article attempted to determine the factors affecting the preload and screw loosening. Methods: Available clinical studies from 1981 to 2008 from the PUBMED that presented screw loosening data and review articles regarding screw joint stability were evaluated. Eleven studies dealing the biomechanical principles of the screw mechanics were reviewed. Moreover, the results of our data were included. Results: The frequency of screw loosening was consequently reduced due to the advancement in torque tightening with torque wrench, screw material, coating technique for reducing the frictional force, and thread design, etc. If preload in the screw falls below a critical level, joint stability may be compromised, and the screw joint may fail clinically. The types of fatigue failure of screw were divided to adhesive wear, plastic deformation, and screw fracture. Conclusion: An optimum preload is essential to the success of the implant-abutment complex. To maintain optimum preload, using a torque wrench and re-tightening at recall time were needed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.35-35
• /
• 2003

)를 금속와이어에 인가하면 저항발열에 의해 와이어가 미세한 입자나 금속증기상태로 폭발하는 현상을 이용한 것으로 기상합성법에 속한다고 할 수 있다. 선폭법은 다른 제조법에 비해 공정이 간단하여 생산비용이 저렴하며, 원재료의 조성을 갖는 분말의 합성과 금속간화합물, 융점차이가 나는 재료의 합금화 등이 가능하다. 인가에너지의 크기와 폭발 시 분위기를 제어함으로써 분말의 평균크기와 분포 제어 또한 가능하다. 본 연구는 러시아의 우수한 기초기술을 바탕으로 Pb-Sn계 합금은 전기폭발법으로 극미세분말을 제조하였으며, 분말의 형상, 상 화학조성의 변화를 조사하였다. 본 실험에 사용된 Sn-Pb계(All-Union State Standard 1499-70, 0.53mm)합금와이어는 자동시스템(1-0.6Hz)에 의해 챔버안으로 공급되었다. 이 때 임계폭발 와이어 길이는 50-80nm으로 실험을 행하였다. 챔버 압력은 1.4~2.0atm으로 유지하였다. 제조된 분말의 특성은 XRD, XRPES, SEM등을 이용하여 분말의 형상과 상, 화학조성, 표면분석을 행하였으며 DSC, TGA, BET분석을 통하여 온도변화에 따른 금속분말의 열량변화, 질량변화, 비표면적을 측정하였다. 제조된 Sn-Pb계 분말은 모두 평균 입도 117nm~220nm의 구형형상이었다. 이때 합금분말의 조성은 51.17~63.21 at%Sn, 35.47~46.37 at%Pb로 나타났다. 와이어에 인가되는 비에너지(W/Wc)가 감소된에 EK라 표면층의 Pb함량이 증가함을 보였다. 이는 와이어 내부 저항의 감소로 인한 공정시간의 지연과 Sn, Pb의 확산계수 차이에 의한 것으로 사료된다. 열분석 결과, Sn~Pb계 화합물의 융점은 167~$169^{\circ}C$로 관찰되었으며, $10^{\circ}C$/min로 $920^{\circ}C$까지 승은 하였을 때 17.1~18 wt%의 질량증가를 보였다.TEX>계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10TEX>$mm^3$ 크기의 시편을 준비하였다.준비하였다.전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in general setting and lo

• Archives of design research
• /
• v.17 no.3
• /
• pp.343-352
• /
• 2004

Under the production system of a free market economy, the modern consumers'goods that feature current trends reveal diverse aspects of the whole society and culture. This phenomenon is progressing at such a rapid speed that theories can barely keep up to explain it dearly. It is believed that the reason for the lag in academic theories is the formation of pluralistic values in human lifestyles due to the development of science and information communication. The pluralism of values in contemporary society is being studied in many academic fields, and the design among these fields often sees such a phenomenon as one of the post-modernism concepts, where post-modernism suggests a diversification and dismantling of modernism. In other words, the current design is closely watching products that are totally different from existing products, from complex and conceptual outcomes in the field of design to products that reflect various trends. Thus, it is true that package design, which proactively reflects current trends, freely traverses among specific domains of various fields that have been determined tacitly. It is also believed that other fields are also reflecting the same developments. Such a phenomenon is strikingly revealed with so-called 'fancy products', while other products 'parody' package design. This study sees the phenomenon as dismantling the border between product design and package design. The examined package design reflects the broader characteristics of the times, based on current concepts and meanings, after reviewing design examples.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.112-115
• /
• 2009

Purpose: The test had been applied for outpatient by end of 2006, however, it has been included in the medical examination since January 2007, as demand and interests have been gradually increasing in the thyroid gland disease and cancer. thus, we would necessarily evaluate usefulness of the test by comparing the number of patients who are diagnosed as "benignancy" by the medical test with the number of outpatient who attend and are diagnosed as autoimmune thyroid disease among the benign patient, in samsung medical center for a certain period. Materials and Methods: Based on the result for Anti-TPO Antibody test by RIA for the 12,937 patients in samsung medical center from October 2007 to March 2008, for six months, benignancy rate classified by sex and age is measured statistically and number of the patients who are diagnosed as autoimmune thyroid disease are kept tracked on. Results: According to the analysis of the Anti-TPO antibody test 1,135 of 12,937, which is 8.77% are benign and 218 treated patient of them, which is 19.2%, were diagnosed as autoimmune thyroid disease. Conclusions: Based on the statistics, usefulness of the test seem to have co relationship with derivation of autoimmune thyroid disease. this is 19.2% of probability relatively high. this figure, however, does not have strong relationship with specialty of the disease. Thus screening test seems to have somewhat effectiveness, considering other experiments and their margin.

• Journal of Korean Historical Folklife
• /
• no.46
• /
• pp.195-237
• /
• 2014

Palsapum are ornaments to reveal the purpose of commander of three naval forces as well as symbols to remember the greatness of admiral Yi, Sun-Shin. In 1966, ther were designated as a treasure No. 440 based on their value; however, they have not received attention from academia because they are relics from China. This study compares and analyzes the document, paintings, and relevant references from Korea and China focusing on Palsapum, understands their formal characteristics, and examines their historical value such as years and location of creation. As a result, the study determines five of them are original, but three of them were newly created by the later generations. The five, Dodogin (都督印, Commander's seal)·Yeongpae (令牌, Commander's tablet)·Gwido (鬼刀, Replica of the devil sword)·Chamdo (斬刀, Replica of the decapitation swor d)·and Gognapal (bugle) were created by Ming Dynasty before 1598, and delivered by the hands of General Chen Lin. The other three, Dokjeongi (督戰 旗, Battle flag)·Hongsoryeonggi (紅小令旗, Commander's flag)·and Namsoryeonggi (藍小令旗, Commander's flag), were created in 19th century by Joseon Dynasty. After analysis on the former relics, the study determines that they are not official relics with the dignity of Ming Dynasty but personal relics with regional characteristics; in other words, Palsamun are not the royal gifts from Emperor Shenzong to Admiral Yi, Sun-Shin. but personal momentoes left by General Chen Lin in the Tongjeyoung to celebrate the admiral. The names, variety, numbers, and appurtenances of Palsapum have been changed with time as follows. First, the scholars of Jeseon in 17the century only focused on Dodogin. It was certainly created in Ming Dynasty; however, it was a personal stamp, so considered to be not from the emperor but from General Chen Lin. Second, Palsapum was called Palsamul and consisted of 14 pieces of 8 kinds in 18the century, ; it is confirmed on the 「Dosul(圖說, stories with pictures of」 『Yi Chungmugong Literary Collection』 The sizes of five relics including Dodogin are similar to the records, but their patterns and shapes are exotic, or cannot be found in Joseon. Thus, they reflect the regional characteristics of Guangdong province. Third, they were called Palsapum, and consisted on 15 pieces of 8 kinds in 19th century; it is confirmed on , a sixteen-fold folding screen drawn by Shin, Gwan-Ho in 1861. The stamp box, tablet bag, and three flags were newly created to engrave Joseon style letters and patterns on damageable materials such as leather and cloth. The relics easy to be destroyed have been renewed even after 19th century. Last, there are many misunderstandings about Palsapum by governmental indifference and improper management of records even though they were designated as a treasure in very early times. Thus, authorities should be concerned with Palsapum to provide the measures for stable maintenance of the relics; this will let people remember not only the history of cooperation between Korea and China to stop the Japanese ambition, but also Admiral Yi, Sun-Shin and General Chen Lin to bring victory in Japanese invasions of Korea.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.54-71
• /
• 2012

This paper investigates Buddhist sculptures of the Gulsan-sa School of Seon Buddhism, which was established by the priest Beomil(梵日) at Myeongju(溟州), present-day Gangneung(江陵) area, and prospered until the late Goryeo period. There are very few surviving Buddhist images at Gulsan2 temple-site showing the Buddhist art when Beomil or his disciples, Gaecheong(開淸) and Haengjeok(行寂), were active, except a set of huge stone pillars for temple-banners and a stone monk stupa. It is therefore necessary to focus on pieces of artworks in Gangneung and nearby areas to explore the characteristics of Buddhist art of Gulsan-sa from the late Silla to early Goryeo period. For example, the stone relief seated Buddha image, one of Four Buddhas of Four Directions, and a stone relief of standing Guardian King both from the stone pagoda at Mujin temple-site(無盡寺址) can be compared with stupa reliefs at the capital Gyeongju area in their high quality of carving. The stone octagonal base showing seven lions on each of seven sides at Boheon-sa(普賢寺) demonstrates that it was made as a part of an octagonal lotus pedestal for a Vairocana Buddha now lost. Since Boheon-sa was erected by Gaechung, a disciple of Beomil as a branch of Gulsan-sa, it is fair to assume that the Vairocana image at Boheon-sa might have been closely related to the Buddhist images at Gulsan-sa in its style and iconography. The stone seated Bodhisattva from Hansong temple-site(寒松寺址) displays a benign face, exquisite necklace, and exotic iconography in its hand gesture and high cylindrical crown. The stone seated Buddha at Cheonghak-sa(靑鶴寺), brought from a temple-site where fragments of roof-tiles with the inscription of Heukam-sa(黑岩寺) were discovered, displays the late Silla and early Goryeo period. Heukam-sa seems to have been related to Gulsan-sa or have been one of the branches of Gulsan-sa. Extant fragments of artworks at Myeongju implicate the high quality of Buddhist art of Gulsan-sa in its iconography and style as well as unique features of Gulsan-sa Seon School.

• Journal of Life Science
• /
• v.19 no.2
• /
• pp.219-227
• /
• 2009

The antifatigue and endurance promoting properties of two Korean medicinal herb extracts and molasses with various mineral components were studied by evaluating forced-swimming capacity and biochemical parameters in ICR mice. The treatment groups were orally administered mineral beverages which were contained 6% sugar with the mixture of Maesil (Prunus mume fruit) extracts, Omija (Schisandra chinensis fruit) extracts and molasses for 4 weeks. The exercised forced-swimming tests were conducted after 28 days of beverage supplementation. The swimming times to exhaustion were longer 1.5${\sim}$2 times in group 6 and group 10 than control goup (Control: 93.2${\pm}$10.4 sec; Beverage 6; 190.8${\pm}$25.6 sec, Beverage 10; 173.6${\pm}$21.8 sec; p<0.05). Moreover, the activity of hexokinase (Control: 5.23${\pm}$0.38 ${\mu}mol$l/g tissue; Beverage 6: 5.99${\pm}$0.18 ${\mu}mol$/g tissue, Beverage 10: 6.13${\pm}$0.25 ${\mu}mol$/g tissue, p<0.05) and citrate synthase (control: 42.9${\pm}$1.87 ${\mu}mol$/g tissue; Beverage 6: 56.8${\pm}$3.98 ${\mu}mol$/g tissue, Beverage 10; 59.5${\pm}$3.09 ${\mu}mol$/g tissue, p<0.05) were also significantly higher than those of control group. Even if the treatment groups had long swimming than control group, there is no significant difference in the glycogen contents of gastrocnemus muscle or liver between the control group and each treatment group. This demonstrated an improvement in endurance. These results suggest that reported herbal beverage is very effective to combat fatigue, improve endurance and increase overall physical activity.

• Microbiology and Biotechnology Letters
• /
• v.45 no.2
• /
• pp.178-183
• /
• 2017

This study examined a new functional cosmetic material possessing application possibility of Sambucus sieboldiana var. pendula (Nakai) (SS) extract. For this, we analyzed the toxic effect of the SS extract on macrophages (RAW 264.7 cells) by performing MTT assay. Results of the MTT assay showed ${\geq}100%$ cell viability after treatment with $500{\mu}g/ml$ SS extract. To determine the anti-inflammatory activity of the SS extract, we examined its inhibitory effect on lipopolysaccharide (LPS)-induced NO production in RAW 264.7 cells by performing Griess assay. Result of the Griess assay showed that the SS extract inhibited LPS-induced NO production in a concentration-dependent manner. Next, we examined the effect of the SS extract on the production of proinflammatory factors inducible NOS (iNOS) and cyclooxygenase-2 (COX-2) in LPS-stimulated RAW 264.7 cells. First, we determined the inhibitory effect of 50, 100, and $500{\mu}g/ml$ SS extract on iNOS and COX-2 protein expression by performing western blot analysis, with ${\beta}$-actin as a positive control. Results of western blotting showed that treatment with $500{\mu}g/ml$ SS extract decreased iNOS and COX-2 protein expression by 31.2% and 54.7%, respectively. Next, we determined the inhibitory effect of 50, 100, and $500{\mu}g/ml$ SS extract on iNOS and COX-2 mRNA expression by performing reverse transcription-polymerase chain reaction (PCR), with GAPDH as a positive control. Results of reverse transcription-PCR showed that treatment with $500{\mu}g/ml$ SS extract decreased the mRNA expression of iNOS and COX-2 by 72.2% and 89%, respectively. These results suggest that the SS extract is a highly valuable natural compound because of its functional components and anti-inflammatory activity.