• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.25-31
• /
• 1974

1. Various gluing qualities applying Resorcinol Plyophen #6000 were studied on aiming the strength relationships of laminated woods resulted by single species [poplar (Populus deltoides), larch(Larix leptolepis)], mixed species of (poplar and larch), preservatives, treated poplar the scarf joint with mixed species of poplar and larch and the scarf joint treated with preservatives. 1. 1 On the block shear and on the DVL tension test, the mean wood failure ratio showed an excellent value i.e., above 65% and the tangential strength for larch was higher than that of radial, but it was reversed for poplar as shown in Tables 1 and 2. 1. 2 The lamina treated with Na-PCP reduced slightly the strength but the limited strength allowed for manufacturing laminated wood was not influenced by treating Na-PCP as shown in Tables 3 and 4. 1. 3 The safe scarf ratio in the plane scarf joint was above 1/12 for larch and 1/6 for poplar regard less of the chemical treatment or untreatment as shown in Tables. 5, 6, 7 and 8. 2. In the normal and boiled state, the gluing quality of the laminated wood composed of single[poplar (Populus deltoides), larch (Larix leptolepis)] and double species (poplar and larch) glued with Resorcinol Plyophen #6000 were measured as follow, and also represented the delamination of the same laminated wood. 2.1 The normal block shear strength of the straight and curved laminated wood (in life size) were more than three times of the standards adhesion strength. And, the value of the boiled stock was decreased to one half of the standard shear adhesion strength, but it was more than twice the standard strength for the boiled stock. Thus, it was recognized that the water resistance of the Resorcinol Plyophen #6000 was very high as shown in Tables 9 and 10. 2. 2 The delamination ratio of the straight and curved laminated woods in respect of their composition were decraesed, in turn, in the following order i. e., larch, mixed stock (larch+poplar) and poplar. The maximum value represented by the larch was 3.5% but it was below the limited value as shown in Table 11. 3. The various strengthes i.e., compressive, bending and adhesion obtainted by the straight laminaced wood which were constructed by five plies of single and double species of lamina i. e., larch (Larix leptolepis) and poplar (Populus euramericana), glued with urea resin were shown as follows: 3. 1 If desired a higher strength of architectural laminated wood composed of poplar (P) and larch (L), the combination of the laminas should be arranged as follows, L+P+L+P+L as shown in Table 12. 3.2 The strength of laminated wood composed of laminas which included pith and knots was conside rably decreased than that of clear lamina as shown Table 13. 3.3 The shear strength of the FPL block of the straight laminated wood constructed by the same species which were glued with urea adhesives was more than twice the limited adhesion strength, thus it makes possible to use it for interior constructional stock.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.89-93
• /
• 2000

This experiment was conducted to investigate the effects of soil texture on agronomic characteristics and tuber yield in chinese yam (Dioscorea opposita Thunb). Tuber length and weight was greater and tuber shape was much better in sandy loam and loam soil than in sandy or clay loam soil. In loam and sandy loam soil, fresh tuber yield was increased by $21{\sim}27%$ in short-tuber type and 6% in long-tuber type, and large tubers yield (above 260g) was increased by $45{\sim}55%$ in short-tuber type and $20{\sim}22%$ in long-tuber type compared to those in sandy soil. There was no differences in large tuber yield at the 5% level of significance between loam and sandy loam soil. Malformation of tuber with bifurcation was extremely increased in sandy soil, and tuber diameter of long-tuber type was decreased in clay loam soil compared to those of the other soil texture.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2046-2050
• /
• 2008

현재까지 우리나라에서 주로 사용되고 있는 2차원 흐름 해석 모형은 미연방 도로국(U.S. Federal Highway Administration)과 연계하여 Brigham Young University에서 개발된 SMS(Surface-Water Modeling System)모형이다. SMS모형 중 이송 확산 모형으로는 RMA-4가 포함되나 이 모형은 최신 수치기법을 반영하지 못하는 등의 문제점들로 인해 실제 물리적 현상을 모의에 있어서 한계를 가지고 있다. 따라서 물리적 현상에 대한 적절한 모의를 위해 여러 개선과정을 거쳐 RAM4가 개발되었다. 본 연구를 위해 점적분 유사량 측정기(P-61)와 대하천 유속계를 사용하여 대상구간의 SS자료 및 유속의 2차원적 분포를 취득하였고, SMS의 Pre-processing 기능을 이용하여 유한요소망을 구성하였다. 구성된 유한요소망과 흐름모형인 RMA-2를 사용하여 대상구간의 유속장을 모의하였다. 이때 모의된 유속장과 현장에서 취득한 유속분포를 비교하여 RMA-2를 검증하였고, SS자료와 RAM4로 모의된 농도장을 비교하여 RAM4를 검증하였다. 검증된 두 모형을 바탕으로 대상 구간에서 다량의 점오염원이 투입되는 가상의 시나리오를 선정 및 적용하여 오염물 이송 및 확산 거동에 대해 살펴보았다. 본 연구의 대상 하천은 형산강으로써, 유역 내에 경주시와 포항시가 위치하고 이 두 도시를 잇는 산업도로가 형산강 본류 위를 지나고, 또한 두 도시를 관류하고 있어 다른 국가하천과 마찬가지로 지속적이고 안정적인 수질관리가 필요한 하천이다, 모의구간은 형산강 본류 중 No. 68(안강 수위관측소 상류 약 350 m)에서 No. 48(부조 수위관측소 하류 약 200 m)까지로서, 약 4.3 km 구간을 모의 하였다. 모의구간 시점에서 약 0.35 km 지점에 산업도로의 일부분인 강동대교, 0.98 km 지점에 왕신천 유입, 1.35 km 지점에 수중보, 1.8 km 지점에 국당1교, 3.2 km 지점에 국당2교가 위치하며 구간 내에는 만곡 및 사행, 특히 수중보 전 후로 사주가 발달해있어 2차원 흐름 및 이송확산 모의에 적합하다고 판단되었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.705-708
• /
• 2008

Diatomite, bentonite and zeolite were used as porous materials for fabricating hygroscopic panels. Moisture adsorption and desorption of porous materials were investigated and hydrothermal method was applied to fabricate panels. Cheolwon diatomite and Pohang zeolite showed excellent characteristics of moisture adsorption and desorption. These characteristics were caused by higher surface area and pore volume of porous materials. Moisture adsorption contents were influenced by surface area and pore volume of panels, and surface area more effected on moisture adsorption. Moisture adsorption content of panel with 10% Pohang zeolite was 180g/m$^2$and that of 10% Cheolwon diatomite was 170g/m$^2$. Moisture desorption content of panel with 10% Pohang zeolite was 105g/m$^2$. Moisture adsorption contents of panel with porous materials were higher than that of panel without porous materials.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.61-63
• /
• 1978

Both bark and wood sections obtained, by cutting with a razor blade, from living tissue of Cronartium ribicola cankers of Korean white pine (Pinus koraiensis) were transferred to a mixture of 2 parts of chloroform and 1 part of methanol, and the sections were stained using a modified lactophenol cotton blue. The formula for this staining is as follows: Lactic acid 20gm, phenol crystal 20gm, cotton blue 0.05gm, and 60% EtOH 100ml. The rust hyphae and haustoria were stained blue, and the wide hyphae with straight or curved haustoria could be distingwished from the pine tissue.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.39-46
• /
• 1975

The optimum plot size and shape for soybean yield trials were estimated by using two different soybean varieties, Kumkang-daelip and Clark. Long narrow shape plot was generaIly showed lower C.V. value as compared to the plots consisted of more row number with short row length. The results obtained in this experiment provided the optimum size and shape of plots for Clark as 1. 4m x 6m, and for Kumkang-dailip as 1.4m $\times$ 9m, respectively.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.115-118
• /
• 1969

In a series of studies on the formation processes and chemical properties of humic substances from paddy soils the photoabsorption spectra of hymatomelanic and humic acids were recorded in the visible, ultraviolet and infrared regions. The spectra patterns of both fractions in the visible range were indicative of the decrease in optical density with the rise of wavelength and the UV-spectra showed the maximum peak at $235\;m{\mu}$, the minimum at $395\;m{\mu}$. The IR-spectra indicate a typical pattern showing a few sharp peaks in both fractions. The spectra of both fractions were compared and discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• Water for future
• /
• v.14 no.1
• /
• pp.39-49
• /
• 1981

The purpose of this study is to examine the meander charactericstics for the rivers in Korea..In this study, the new characteristics factors of meander are proposed, and the relationships among the factors proposed in this study and the existing factors are derived. An attempt is made to find considerable relation among meander characteristics, but width and meander belt did not show any defined trend and considerable scatter of points was observed. Relationships among the meander length, belt and flowrate, etc., which are factors of meander characteristics, are analyzed the 67 rivers above 30km in length. Channel shape factor which is the ratio of the length from the starting point to the end to the channel lenght, tortuosity which is the ratio of the curved channel length against the channel length are suggested for a new characteristics factor of meander. They are well correlated with channel length, Horton's shape facotr and meander gradient, consequently have to be important measures of river meander. The result of the detailed comparison and the analysis of degree of sinuosity, velocity and water surface slop are brought light on the fact show that the curved reach is morestable than the straight one. The ratio of the meander length to the meander belt and its accumulative frequency showed excellent correlationship when plotted on the semi-log paper. The results of regression analysis of meander belt and meander length show linear for the South Han river branches and power curve for the Geum river and the Nakdong river branches.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.