• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.437-443
• /
• 2005

Dilaceration is most common in maxillary central incisor. Impaction by dilacerated tooth cause orthodontic problem such as tilting of adjacent tooth, midline deviation. Dilaceration is caused by trauma, cyst, other origin and tooth shape, degree of root curvature, location in the alveolar bone, ability of spontaneous eruption should be considered whether treat or not. Labially and lingually dilacerated tooth is difficult to spontaneous eruption. Thus, Prosthetic treatment alternative with extraction, auto transplantation, orthodontic traction with surgical exposure is included within the treatment alternative. These cases are about impacted central incisor with dilacerated root. We use closed eruption technique and guide impacted tooth into normal position by orthodontic traction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.541-550
• /
• 2011

This study sets the goal to improve effectively water quality of stream by complementing the weak points of the gravel contact oxidation process to use the inverted siphon curved channel system in free overfall of serial contact materials. The size of the current system can be diminished by expanding contact time, and the materials' replacement can be made easier when their gap are closed through the filtering boxes of contact materials. This system also has been developed into a construction method in which mixed and serial contact materials can be employed by using just the conventional single contact materials. It was verified the improvement ability of water quality of this system, during the simulation test at Tandong stream in Daejeon. The results of the verification of water quality improvement through several experiments in field were measured as follows : it showed to reduce about the averaged 55~83% higher than 60~75%, the internal planned goal of water quality improvement facilities.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.111-121
• /
• 2000

A numerical model which can analyze the flow and bed topography characteristics of a single bend and continuous one was suggested using the equations of mass, momentum, the vertical distribution of secondary flow, and the transverse bed slope. The calculated flow and bed topography characteristic values were compared with the experimental data in a single bend, and the predicted path of maximum streamwise velocity in continuous bends also compared with the Vadnal and Chang's data. The comparisons gave good results. A curved channel with 180 degrees was used. Sand and anthracite were selected as bed materials in the movable bed experiments. The model application of this model to the sand bed and the anthracite one accorded well with the observed values in the experiments. This model was proved to be useful for predicting the flow and bed topography with the change of bed materials. The results of this research could be used to construct and control curved channels as a fundamental information.mation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1661-1665
• /
• 2006

In a natural river, cross sections of a channel vary according to inner or outer parts of meandering. Generally, depth of outer parts is deeper than that of inner parts. This kind of cross section change by meandering can be demonstrated by Beta distribution. The objects of this research is a 3D simulation of primary and secondary flow in the meandering natural channel. FLOW-3D program, a numerical model using CFD technique, and LES method was used for this research. 3D simulations were conducted in the channels having Beta distribution cross sections which have beds of mortar, gravel and vegetation. Two types of water stages and discharge were applied to each channel. In this research, primary flows are located in the outer parts of a top of bend and secondary flows rotate in the bottom on outer parts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.360-362
• /
• 2018

본 논문에서는 X-ray 영상에서 척추 영역을 추출 및 분석하여 척추만곡도를 자동으로 측정하는 방법을 제안한다. 제안된 방법은 X-ray 영상에서 어깨뼈와 골반뼈 등과 같이 필요 없는 영역을 제거한 ROI(Region of Interest) 영역을 추출하고, 추출된 ROI 영역에서 척추 에지를 검출하기 위해 가우시안-라플라시안(Laplacian of Gaussian) 필터를 적용하여 척추 에지를 검출한다. 추출된 척추 영역을 척추의 Apex를 기준으로 Above Apex와 Below Apex 영역으로 구분하고 허프 변환(Hough Transform) 기법을 적용하여 두 영역에 대한 ($r,{\theta}$) 허프 공간을 구한다. ($r,{\theta}$) 허프 공간에서 척추만곡도 측정에 필요한 수평 직선만을 검출하기 위하여 수직 직선을 나타내는 교점들의 영역을 제거하여 척추만곡도 측정에 필요한 영역을 추출한다. 제안된 척추 추출 방법을 다양한 X-ray 영상을 대상으로 실험한 결과, 전문의가 척추만곡도를 효과적으로 측정하고 분석할 수 있는 척추 영역이 추출된 것을 확인할 수 있었다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.1 s.20
• /
• pp.69-81
• /
• 2006

The purpose of this study is to identify the downstream influences due to the dam discharge by using 2-dimensional model, SMS(Surface water Modeling System). RMA-2 and SED-2D in SMS were applied to Yongdam multipurpose dam watershed located in Gum river basin. Through the simulation, erosion and deposit quantitative analysis of sinuous channels and scour pattern analysis of bridges have been done. A differences erosion depths between deposit are simulated as $-102.4 mm{\sim}54.2 mm$ at No.176(1.4 km) and $-104.1 mm{\sim}28.9 mm$ at No.146(7.4 km), sinuous channel. The river bed at Kamdong bridge in straight channal is simulated as uniform erosion. However, the river bed at Dumdul bridge in sinuous channal has been shown as different erosion depths at each sides. Consequently, the parts that could not be simulated on the existing 1-dimensional model, can be improved results by using a 2-dimensional model, about weakness points for hydraulic modeling such as extreme bend, tributary confluence.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.12-15
• /
• 2001

Dilaceration is a tooth abnormaly occuring in the histo-morphodifferention stage resulting from disturbance between the uncalcified and already calcified portion that affects both the crown and root. The involved tooth is usually the maxillary central incisor and it also shows high prevalence of impaction. The cause of dilaceration can be either from the trauma of the primary tooth, ectopic development of the tooth germ or from cysts. And it is also found in some cases of Otodental syndrome, Hurler syndrome, Cleidocranial dysostosis. The purpose of this study is to show that periapical lesions caused by dental caries can be another factor in causing dilaceration.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1679-1683
• /
• 2007

최근 우리나라에서 하천 및 유역 환경의 급격한 변화로 인하여 하천 형태가 많이 변하고 있는 추세이다. 특히 사행하는 모래 하천에서 만곡부 사주의 형태 변화가 커지고 있다. 이 연구에서는 이와 같은 모래 하천의 만곡부에서 사주의 변화 특성을 평가하고 그 원인을 파악하기 위하여 이동상 수리모형 실험을 실시하였다. 실험에서 하천 및 유역의 여러 상황 변화를 감안하여 유량, 유사 공급량, 공급 시간, 하천 변형 등 다양한 조건을 상정하였다. 연구 대상하천은 낙동강 본류이며, 중점 수리모형 실험대상 구간은 우리나라의 전통민속마을인 안동 하회마을을 태극형으로 감싸면서 사행하는 만곡부이다. 이동상 실험규모는 수평축적 1/110, 수직축적 1/50로 왜곡도가 2.2로써 비교적 대규모이다. 모형 하상재료는 입경 0.29 mm의 석탄분(anthracite)을 채택하였으며, 현장에서 하상재료조사와 상사해석을 통해 결정하였다. 실험 결과, 유량과 유사 공급량 변화에 따른 사주 변화가 밀접한 관계가 있는 것으로 나타났다. 특히 유사 공급이 이루어지지 않을 때 국지적 퇴적양상을 보였다. 이는 사주 내 식생활착으로 이어지는 계기가 될 수 있음을 확인할 수 있었다. 그리고 설계홍수량 규모에서 구하도와 과거 사주가 재현되었는데, 이는 지역주민을 통해 입증되었다. 또한 천연기념물인 만송정 주변의 모래둔덕의 형성과정이 입증되었다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.125-133
• /
• 2010

In general, curved bends raises a risk of overtopping due to floods and also threatens a bank safety due to a local flow concentration. This study aims to test the applicability of CCHE2D model for experimental flumes with two different types of bends and then investigate flow characteristics in the sharply-curved bend of a natural channel. The results demonstrated that the percent error of water level was within 4.9% for experimental flume applications and the simulated spatial distribution of velocity matched the observed results very closely. The calibrated model based on the experimental flumes was also applied to analyze the flow characteristics in natural channel bends of the Daeyu reach, located in a downstream of the Youngdam Dam. The results showed that in upstream, the simulated water level by the CCHED was observed at 1.5 m higher than the 1-D numerical model (HEC-RAS) result since the HEC-RAS could not represent the bend geometry effect on streamflow. However, the calculated results by several empirical formula support that the CCHE2D is suitable for the super elevation simulation as well as flood stage and velocity in a natural channel bend.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.883-888
• /
• 2007

일반적인 하천의 흐름방향으로 발생하는 주흐름(primary flow)에 중첩하여 주흐름 방향의 수직단면에 이차류(secondary flow)가 발생하게 되며 이러한 이차류의 발달은 투입된 오염물질의 횡혼합을 증대시킨다. 오염물질의 혼합은 이송(advection)과 확산(diffusion) 또는 분산(dispersion)의 과정으로 설명되며 본 연구에서는 수로전체의 혼합과정을 설명하기 위해서 이송 확산 방정식을 적용하였다. 본 연구에서는 실험수조를 $150^{\circ}$의 중심각을 갖는 S자 형태의 만곡수로를 제작하여 유량조건은 15, 30, $60\;{\ell}l/sec$의 세 가지 경우로, 수심은 15, 20, 30, 40 cm의 경우로 총 12 케이스의 실험을 수행하였다. 유속장의 측정은 Sontek사의 3차원 micro-ADV(Acoustic Doppler Velocimeter)를 이용하였다. 오염물질 확산실험은 소금물 용액에 주변수와의 밀도차를 없애기 위해서 메탄올 용액을 첨가하여 추적자로 이용하여 농도장의 분석을 일본 KENEK사의 전기전도도계(conductivity meter)와 Gartner사의 DAS(data acquisition system)를 이용하여 횡방향 유속장의 분포와 오염운의 거동을 비교하여 다음과 같은 결론을 얻게 되었다. 주 흐름은 직선구간에서는 중앙에서 최대 유속을 나타내며, 좌우대칭적인 유속분포의 모습을 보이고, 만곡부에서는 수로안쪽을 따라 최대유속이 발생하였다. 수로의 직선구간에서는 최대유속이 발생하는 즉, 중앙에서의 오염물질의 분산이 가장 활발하게 이뤄졌으며 농도의 퍼짐형상인 오염운 역시 만곡부에서는 수로만곡부의 안쪽을 따라 확산 이동함을 알 수 있었다. 만곡부 외측에서는 오염물질의 정체현상이 일시적으로 발생하며, 유속구조의 횡방향 비대칭구조로 인한 종 횡방향의 분리현상이 발생하고, 오염운의 중첩현상이 종방향으로 연속되게 나타난다. 향후 수심방향 거동을 포함한 3차원적 분석이 요구되며 이 연구결과는 2차원적 수치해석의 적용 및 분석 자료로써 이용이 가능하다.